3M MATERIAL SAFETY DATA SHEET 3M(TM) Electrically Conductive Adhesive Transfer Tape 9703 09/11/2006 Page 1 of 6 Material Safety Data Sheet Copyright, 2006, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. This material safety data sheet (MSDS) is provided as a courtesy in response to a customer request. This product is not regulated under, and a MSDS is not required for this product by the OSHA Hazard Communication Standard (29 CFR 1910.1200) because, when used as recommended or under ordinary conditions, it should not present a health and safety hazard. However, use or processing of the product not in accordance with the product's recommendations or not under ordinary conditions may affect the performance of the product and may present potential health and safety hazards. SECTION 1: PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: 3M(TM) Electrically Conductive Adhesive Transfer Tape 9703 MANUFACTURER: 3M DIVISION: Electronics Markets Materials Division ADDRESS: 3M Center St. Paul, MN 55144-1000 EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours) Issue Date: 09/11/2006 Supercedes Date: 01/26/2006 Document Group: 20-9925-7 Product Use: Intended Use: Bonding SECTION 2: INGREDIENTS Ingredient C.A.S. No. % by Wt Acrylate Adhesive Trade Secret 40 - 70 Nickel 7440-02-0 15 - 40 Silver 7440-22-4 3 - 7 SECTION 3: HAZARDS IDENTIFICATION 3.1 EMERGENCY OVERVIEW Specific Physical Form: Roll of Tape Odor, Color, Grade: translucent, slight acrylate odor General Physical Form: Solid Immediate health, physical, and environmental hazards: The environmental properties of this product present a low environmental hazard. This product, when used under reasonable conditions and in accordance with the 3M directions for use, should 3M MATERIAL SAFETY DATA SHEET 3M(TM) Electrically Conductive Adhesive Transfer Tape 9703 09/11/2006 Page 2 of 6 not present a health hazard. However, use or processing of the product in a manner not in accordance with the product's directions for use may affect the performance of the product and may present potential health and safety hazards. 3.2 POTENTIAL HEALTH EFFECTS Eye Contact: No health effects are expected. Skin Contact: No health effects are expected. Inhalation: This product may have a characteristic odor; however, no adverse health effects are anticipated. Ingestion: No health effects are expected. SECTION 4: FIRST AID MEASURES 4.1 FIRST AID PROCEDURES The following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices are followed. Eye Contact: No need for first aid is anticipated. Skin Contact: No need for first aid is anticipated. Inhalation: No need for first aid is anticipated. If Swallowed: No need for first aid is anticipated. SECTION 5: FIRE FIGHTING MEASURES 5.1 FLAMMABLE PROPERTIES Autoignition temperature Not Applicable Flash Point Not Applicable Flammable Limits - LEL Not Applicable Flammable Limits - UEL Not Applicable 5.2 EXTINGUISHING MEDIA Use fire extinguishers with class B extinguishing agents (e.g., dry chemical, carbon dioxide). 5.3 PROTECTION OF FIRE FIGHTERS Special Fire Fighting Procedures: Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus (SCBA). 3M MATERIAL SAFETY DATA SHEET 3M(TM) Electrically Conductive Adhesive Transfer Tape 9703 09/11/2006 Page 3 of 6 Unusual Fire and Explosion Hazards: No unusual fire or explosion hazards are anticipated. SECTION 6: ACCIDENTAL RELEASE MEASURES Accidental Release Measures: Not applicable. SECTION 7: HANDLING AND STORAGE 7.1 HANDLING This product is considered to be an article which does not release or otherwise result in exposure to a hazardous chemical under normal use conditions. 7.2 STORAGE Not applicable. SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1 ENGINEERING CONTROLS Not applicable. 8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE) 8.2.1 Eye/Face Protection Not applicable. 8.2.2 Skin Protection Avoid prolonged or repeated skin contact. Gloves are not required. 8.2.3 Respiratory Protection Under normal use conditions, airborne exposures are not expected to be significant enough to require respiratory protection. 8.2.4 Prevention of Swallowing Not an expected route of exposure. 8.3 EXPOSURE GUIDELINES None Established SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Specific Physical Form: Roll of Tape Odor, Color, Grade: translucent, slight acrylate odor General Physical Form: Solid Autoignition temperature Not Applicable Flash Point Not Applicable 3M MATERIAL SAFETY DATA SHEET 3M(TM) Electrically Conductive Adhesive Transfer Tape 9703 09/11/2006 Page 4 of 6 Flammable Limits - LEL Not Applicable Flammable Limits - UEL Not Applicable Boiling point Not Applicable Density Not Applicable Vapor Density Not Applicable Vapor Pressure Not Applicable Specific Gravity Not Applicable pH Not Applicable Melting point Not Applicable Solubility in Water Nil Evaporation rate Not Applicable Volatile Organic Compounds Not Applicable Percent volatile 0 % VOC Less H2O & Exempt Solvents Not Applicable Viscosity Not Applicable SECTION 10: STABILITY AND REACTIVITY Stability: Stable. Materials and Conditions to Avoid: Strong acids; Strong bases; Strong oxidizing agents; Heat Hazardous Polymerization: Hazardous polymerization will not occur. Hazardous Decomposition: Under recommended usage conditions, hazardous decomposition products are not expected. Hazardous decomposition products may occur as a result of oxidation, heating, or reaction with another material. SECTION 11: TOXICOLOGICAL INFORMATION Please contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or its components. SECTION 12: ECOLOGICAL INFORMATION ECOTOXICOLOGICAL INFORMATION Not determined. CHEMICAL FATE INFORMATION Not determined. SECTION 13: DISPOSAL CONSIDERATIONS 3M MATERIAL SAFETY DATA SHEET 3M(TM) Electrically Conductive Adhesive Transfer Tape 9703 09/11/2006 Page 5 of 6 Waste Disposal Method: Reclaim if feasible. Dispose of waste product in a permitted hazardous waste facility. EPA Hazardous Waste Number (RCRA): D011 (Silver) Since regulations vary, consult applicable regulations or authorities before disposal. SECTION 14:TRANSPORT INFORMATION ID Number(s): 70-0000-5331-7, 70-0061-1976-5, 70-0160-4136-3, GT-4000-6423-1 Not regulated per U.S. DOT, IATA or IMO. These transportation classifications are provided as a customer service. As the shipper YOU remain responsible for complying with all applicable laws and regulations, including proper transportation classification and packaging. 3M's transportation classifications are based on product formulation, packaging, 3M policies and 3M's understanding of applicable current regulations. 3M does not guarantee the accuracy of this classification information. This information applies only to transportation classification and not the packaging, labeling, or marking requirements. The original 3M package is certified for U.S. ground shipment only. If you are shipping by air or ocean, the package may not meet applicable regulatory requirements. SECTION 15: REGULATORY INFORMATION US FEDERAL REGULATIONS Contact 3M for more information. 311/312 Hazard Categories: Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No Immediate Hazard - No Delayed Hazard - No STATE REGULATIONS Contact 3M for more information. CHEMICAL INVENTORIES This product is an article as defined by TSCA regulations, and is exempt from TSCA Inventory listing requirements. Contact 3M for more information. INTERNATIONAL REGULATIONS Contact 3M for more information. 3M MATERIAL SAFETY DATA SHEET 3M(TM) Electrically Conductive Adhesive Transfer Tape 9703 09/11/2006 Page 6 of 6 This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200. SECTION 16: OTHER INFORMATION NFPA Hazard Classification Health: 0 Flammability: 1 Reactivity: 0 Special Hazards: None National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to be generated in significant quantities. Revision Changes: Section 1: Product name was modified. Section 14: ID Number(s) was modified. Page Heading: Product name was modified. Section 1: Initial issue message was modified. DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user's method of use or application. 3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the MSDS available directly from 3M. 3M MSDSs are available at www.3M.com
下载该文档
文档格式：PDF
更新时间：2014-09-23
下载次数：0
点击次数：1
3M MATERIAL SAFETY DATA SHEET 3M(TM) Electrically Conductive Adhesive Transfer Tape 9703 09/11/2006 Page 1 of 6 Material Safety Data Sheet Copyright, 2006, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon. This material safety data sheet (MSDS) is provided as a courtesy in response to a customer request. This product is not regulated under, and a MSDS is not required for this product by the OSHA Hazard Communication Standard (29 CFR 1910.1200) because, when used as recommended or under ordinary conditions, it should not present a health and safety hazard. However, use or processing of the product not in accordance with the product's recommendations or not under ordinary conditions may affect the performance of the product and may present potential health and safety hazards. SECTION 1: PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: 3M(TM) Electrically Conductive Adhesive Transfer Tape 9703 MANUFACTURER: 3M DIVISION: Electronics Markets Materials Division ADDRESS: 3M Center St. Paul, MN 55144-1000 EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours) Issue Date: 09/11/2006 Supercedes Date: 01/26/2006 Document Group: 20-9925-7 Product Use: Intended Use: Bonding SECTION 2: INGREDIENTS Ingredient C.A.S. No. % by Wt Acrylate Adhesive Trade Secret 40 - 70 Nickel 7440-02-0 15 - 40 Silver 7440-22-4 3 - 7 SECTION 3: HAZARDS IDENTIFICATION 3.1 EMERGENCY OVERVIEW Specific Physical Form: Roll of Tape Odor, Color, Grade: translucent, slight acrylate odor General Physical Form: Solid Immediate health, physical, and environmental hazards: The environmental properties of this product present a low environmental hazard. This product, when used under reasonable conditions and in accordance with the 3M directions for use, should 3M MATERIAL SAFETY DATA SHEET 3M(TM) Electrically Conductive Adhesive Transfer Tape 9703 09/11/2006 Page 2 of 6 not present a health hazard. However, use or processing of the product in a manner not in accordance with the product's directions for use may affect the performance of the product and may present potential health and safety hazards. 3.2 POTENTIAL HEALTH EFFECTS Eye Contact: No health effects are expected. Skin Contact: No health effects are expected. Inhalation: This product may have a characteristic odor; however, no adverse health effects are anticipated. Ingestion: No health effects are expected. SECTION 4: FIRST AID MEASURES 4.1 FIRST AID PROCEDURES The following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices are followed. Eye Contact: No need for first aid is anticipated. Skin Contact: No need for first aid is anticipated. Inhalation: No need for first aid is anticipated. If Swallowed: No need for first aid is anticipated. SECTION 5: FIRE FIGHTING MEASURES 5.1 FLAMMABLE PROPERTIES Autoignition temperature Not Applicable Flash Point Not Applicable Flammable Limits - LEL Not Applicable Flammable Limits - UEL Not Applicable 5.2 EXTINGUISHING MEDIA Use fire extinguishers with class B extinguishing agents (e.g., dry chemical, carbon dioxide). 5.3 PROTECTION OF FIRE FIGHTERS Special Fire Fighting Procedures: Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus (SCBA). 3M MATERIAL SAFETY DATA SHEET 3M(TM) Electrically Conductive Adhesive Transfer Tape 9703 09/11/2006 Page 3 of 6 Unusual Fire and Explosion Hazards: No unusual fire or explosion hazards are anticipated. SECTION 6: ACCIDENTAL RELEASE MEASURES Accidental Release Measures: Not applicable. SECTION 7: HANDLING AND STORAGE 7.1 HANDLING This product is considered to be an article which does not release or otherwise result in exposure to a hazardous chemical under normal use conditions. 7.2 STORAGE Not applicable. SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION 8.1 ENGINEERING CONTROLS Not applicable. 8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE) 8.2.1 Eye/Face Protection Not applicable. 8.2.2 Skin Protection Avoid prolonged or repeated skin contact. Gloves are not required. 8.2.3 Respiratory Protection Under normal use conditions, airborne exposures are not expected to be significant enough to require respiratory protection. 8.2.4 Prevention of Swallowing Not an expected route of exposure. 8.3 EXPOSURE GUIDELINES None Established SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES Specific Physical Form: Roll of Tape Odor, Color, Grade: translucent, slight acrylate odor General Physical Form: Solid Autoignition temperature Not Applicable Flash Point Not Applicable 3M MATERIAL SAFETY DATA SHEET 3M(TM) Electrically Conductive Adhesive Transfer Tape 9703 09/11/2006 Page 4 of 6 Flammable Limits - LEL Not Applicable Flammable Limits - UEL Not Applicable Boiling point Not Applicable Density Not Applicable Vapor Density Not Applicable Vapor Pressure Not Applicable Specific Gravity Not Applicable pH Not Applicable Melting point Not Applicable Solubility in Water Nil Evaporation rate Not Applicable Volatile Organic Compounds Not Applicable Percent volatile 0 % VOC Less H2O & Exempt Solvents Not Applicable Viscosity Not Applicable SECTION 10: STABILITY AND REACTIVITY Stability: Stable. Materials and Conditions to Avoid: Strong acids; Strong bases; Strong oxidizing agents; Heat Hazardous Polymerization: Hazardous polymerization will not occur. Hazardous Decomposition: Under recommended usage conditions, hazardous decomposition products are not expected. Hazardous decomposition products may occur as a result of oxidation, heating, or reaction with another material. SECTION 11: TOXICOLOGICAL INFORMATION Please contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or its components. SECTION 12: ECOLOGICAL INFORMATION ECOTOXICOLOGICAL INFORMATION Not determined. CHEMICAL FATE INFORMATION Not determined. SECTION 13: DISPOSAL CONSIDERATIONS 3M MATERIAL SAFETY DATA SHEET 3M(TM) Electrically Conductive Adhesive Transfer Tape 9703 09/11/2006 Page 5 of 6 Waste Disposal Method: Reclaim if feasible. Dispose of waste product in a permitted hazardous waste facility. EPA Hazardous Waste Number (RCRA): D011 (Silver) Since regulations vary, consult applicable regulations or authorities before disposal. SECTION 14:TRANSPORT INFORMATION ID Number(s): 70-0000-5331-7, 70-0061-1976-5, 70-0160-4136-3, GT-4000-6423-1 Not regulated per U.S. DOT, IATA or IMO. These transportation classifications are provided as a customer service. As the shipper YOU remain responsible for complying with all applicable laws and regulations, including proper transportation classification and packaging. 3M's transportation classifications are based on product formulation, packaging, 3M policies and 3M's understanding of applicable current regulations. 3M does not guarantee the accuracy of this classification information. This information applies only to transportation classification and not the packaging, labeling, or marking requirements. The original 3M package is certified for U.S. ground shipment only. If you are shipping by air or ocean, the package may not meet applicable regulatory requirements. SECTION 15: REGULATORY INFORMATION US FEDERAL REGULATIONS Contact 3M for more information. 311/312 Hazard Categories: Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No Immediate Hazard - No Delayed Hazard - No STATE REGULATIONS Contact 3M for more information. CHEMICAL INVENTORIES This product is an article as defined by TSCA regulations, and is exempt from TSCA Inventory listing requirements. Contact 3M for more information. INTERNATIONAL REGULATIONS Contact 3M for more information. 3M MATERIAL SAFETY DATA SHEET 3M(TM) Electrically Conductive Adhesive Transfer Tape 9703 09/11/2006 Page 6 of 6 This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200. SECTION 16: OTHER INFORMATION NFPA Hazard Classification Health: 0 Flammability: 1 Reactivity: 0 Special Hazards: None National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to be generated in significant quantities. Revision Changes: Section 1: Product name was modified. Section 14: ID Number(s) was modified. Page Heading: Product name was modified. Section 1: Initial issue message was modified. DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user's method of use or application. 3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the MSDS available directly from 3M. 3M MSDSs are available at www.3M.com