DATA SPCIFICATION(特性要求) : (Table-1)
ITEM 项目 MEASUREMENTS 测试脚位 PIN(1-2) LS 电感 PIN(2-3) PIN(1-2) PIN(2-3) DCR 直流电阻 PIN(6-5) PIN(5-4) PIN(1-2)/(2-3) TR 圈比 PIN(1-2)/(6-5) PIN(2-3)/(5-4) HIPOT 耐压 HIPOT 耐压 PH 相位 PRI./SEC. COIL/CORE 2.2 MAX. 2.2 MAX. 44:44±0.5TS 44:56±0.5TS 44:56±0.5TS NO BREAKDOWN 漏电流≤5.0mA NO BREAKDOWN 漏电流≤5.0mA / / F(KHz) =20 Ug(V) =0.1 F(KHz) =20 Ug(V) =0.1 F(KHz) =20 Ug(V) =0.1 VAC=500V /1SEC. F(Hz)=50 VAC=500V /1SEC. F(Hz)=50 1.0mH MIN 1.5 MAX. 1.5 MAX. CHARACTERISTICS 测试范围 1.0mH MIN MEASURING CONDITIONS 测试条件 T(℃)=25± 3; HR(%)=45± 15 F(KHz) =10 Ug(V) =0.1 F(KHz) =10 Ug(V) =0.1 / / REMARK 备注
SERIAL MODE 串联模式 SERIAL MODE 串联模式 4 WIRES MODE 四线模式 4 WIRES MODE 四线模式 4 WIRES MODE 四线模式 4 WIRES MODE 四线模式 Apply Ug (1-2) 电压施加于(1-2) Apply Ug (1-2) 电压施加于(1-2) Apply Ug (2-3) 电压施加于(2-3) /
/
REFER TO LAYOUT DIAGRAM FIG-1 参 考 原 理 图 (FIG-1)
Prepared By ENG: Checked By QA: Approved By ENG:
DATE: DATE: DATE:
TITLE:
TRANSFORMER
CUSTOMER
Approved: Date:
MODEL NO:EE8.3
REV.
00
PAGE 1 OF 3
LAYOUT DIAGRAM (原理图 ) : (FIG-1)
1
N1:Ф0.13X44TS N1:Ф0.13X56TS
6
2
N2:Ф0.13X44TS N2:Ф0.13X56TS
5
3
4
FIG-1
CROSS SECTION DIAGRAM(剖视图) : (FIG-2)
2 Layers 5.0mm(W) insulationTape
N4:Ф0.13X56TS N3:Ф0.13X56TS
2 Layers 5.0mm(W) insulationTape
N2:Ф0.13X44TS N1:Ф0.13X44TS
BOBBIN
TOP SIDE PIN SIDE
FIG-2
TITLE:
TRANSFORMER
CUSTOMER MODEL NO:EE8.3
Approved: Date:
Prepared By ENG: Checked By QA: Approved By ENG:
DATE: DATE: DATE:
REV.
00

下一页