机构名称:深圳市建筑科学研究院股份有限公司 注册号:L0931 2012年06月01日前能力范围:点击进入 地址: A:广东省深圳市光明新区光明街道同富裕工业园内俊伟兴厂区B栋1楼B:广东省深圳市福田区上梅林梅坳三路29号C:广东省东莞市松山湖工业东路8号 获准认可能力索引 序号 地址 能力范围 评审类型 更新时间 1 A 授权签字人(中文) 监督+扩项 2013年02月16日2授权签字人(英文) 监督+扩项 2013年02月16日3A检测能力(中文) 监督+扩项 不定期 2013年02月16日2013年11月21日4检测能力(英文) 监督+扩项 不定期 2013年02月16日2013年11月21日5B授权签字人(中文) 监督+扩项 不定期 2013年02月16日2013年11月21日6授权签字人(英文) 监督+扩项 不定期 2013年02月16日2013年11月21日7B检测能力(中文) 监督+扩项 不定期 2013年02月16日2013年11月21日8检测能力(英文) 监督+扩项 不定期 2013年02月16日2013年11月21日9C授权签字人(中文) 监督+扩项 2013年02月16日10 授权签字人(英文) 监督+扩项 2013年02月16日11 C 检测能力(中文) 监督+扩项 2013年02月16日12 检测能力(英文) 监督+扩项 2013年02月16日Name:Shenzhen Institute of Building Research Co., Ltd. Registration No.:L0931 ADDRESS: A: F1, Building B, Junweixing Factory, Tongfuyu Industry Park,Guangming Block, Guangming New Development Zone, Shenzhen City B:No.29, Meiao 3rd Road, Upper Meilin, Futian District, Shenzhen,Guangdong, China C:8th Industrial Road, Songshan Lake Science and Technology Industrial Park, Dongguan, Guangdong INDEX OF ACCREDITED SIGNATORIES No. Address Range Type Update date 1 A Approved signatories (Chinese) Surveillance+Extending assessment 2013-02-16 2 Approved signatories (English) Surveillance+Extending assessment 2013-02-16 3 A Testing ability(Chinese) Surveillance+Extending assessment Extraordinary 2013-02-16 2013-11-21 4 Testing ability(English) Surveillance+Extending assessment Extraordinary 2013-02-16 2013-11-21 5 B Approved signatories (Chinese) Surveillance+Extending assessment Extraordinary 2013-02-16 2013-11-21 6 Approved signatories (English) Surveillance+Extending assessment Extraordinary 2013-02-16 2013-11-21 7 B Testing ability(Chinese) Surveillance+Extending assessment Extraordinary 2013-02-16 2013-11-21 8 Testing ability(English) Surveillance+Extending assessment Extraordinary 2013-02-16 2013-11-21 9 C Approved signatories (Chinese) Surveillance+Extending assessment 2013-02-16 10 Approved signatories (English) Surveillance+Extending assessment 2013-02-16 11 C Testing ability(Chinese) Surveillance+Extending assessment 2013-02-16 12 Testing ability(English) Surveillance+Extending assessment 2013-02-16 中国合格评定国家认可委员会 认可证书附件(注册号:CNAS L0931) 名称: 深圳市建筑科学研究院股份有限公司 地址:广东省深圳市福田区上梅林梅坳三路29号 签发日期:2012年01月18日 有效期至:2015年01月17日 更新日期:2012年01月18日 附件1 认可的检测能力范围 序号 检测 对象 项目/参数 领域 代码 检测标准(方法)名称及编号(含年号) 限制 范围 说明 序号 名称 一 混凝土结构材料 1 水泥 1. 凝结时间 1001 水泥标准稠度用水量、凝结时间、安定性检验方法 GB/T1346-2001 2. 安定性 3. 水泥标准稠度用水量 4. 细度 水泥细度检验方法 筛析法GB1345-2005 水泥比表面积测定方法 勃氏法 GB/T8074-2008 1 水泥 5. 胶砂强度(ISO法) 1001 水泥胶砂强度检验方法(IS0法) GB/T17671-1999 6. 胶砂强度(快速法) 水泥强度快速检验方法 JC/T738-2004 7. 胶砂流动度 水泥胶砂流动度测定方法 GB/T2419-2005 8. 密度 水泥密度测定方法GB/T208-1994 9. 烧失量 水泥化学分析方法 GB/T176-2008 10. 硫酸盐和三氧化硫 11. 氧化钾和氧化钠 2 通用硅酸盐水泥 部分参数 1001 通用硅酸盐水泥GB175-2007 只测:凝结时间、安定性、水泥标准稠度用水量、细度、胶砂强度(IS0法)、胶砂强度(快速法)、胶砂 流动度、密度、烧失量、硫酸盐和三氧化硫、氧化钾和氧化钠 3 白色硅酸盐水泥 部分参数 1001 白色硅酸盐水泥GB2015-2005 只测:凝结时间、安定性、水泥标准稠度用水量、细度、胶砂强度(IS0法)、氧化钾和氧化钠 4 砌筑水泥 部分参数 砌筑水泥GB/T 3183-2003 只测:凝结时间、安定性、水泥标准稠度用水量、细度、胶砂强度(IS0法)、氧化钾和氧化钠 5 砂1. 筛分析/颗粒级配 1006 普通混凝土用砂、石质量及检验方法标准JGJ52-2006 2. 表观密度 3. 堆积密度 5 砂4. 紧密密度 1006 普通混凝土用砂、石质量及检验方法标准JGJ52-2006 5. 含泥量 6. 泥块含量 7. 石粉含量 8. 吸水率 9. 含水率 10. 氯离子 11. 有机物含量 12. 云母含量 13. 碱活性 14. 坚固性 15. 轻物质含量 16. 硫酸盐及硫化物含量 6 石1. 筛分析/颗粒级配 1006 普通混凝土用砂、石质量及检验方法标准JGJ52-2006 2. 表观密度 6 石3. 堆积密度 1006 普通混凝土用砂、石质量及检验方法标准JGJ52-2006 4. 紧密密度 5. 含泥量 6. 泥块含量 7. 含水率 8. 吸水率 9. 有机物含量 10. 坚固性 11. 针片状颗粒总含量 12. 硫酸盐及硫化物含量 13. 岩石抗压强度 普通混凝土用砂、石质量及检验方法标准JGJ52-2006 工程岩体试验方法标准 GB/T 50266-1999 14. 压碎指标 普通混凝土用砂、石质量及检验方法标准JGJ52-2006 15. 碱活性/碱集料反应 16. 山皮水锈颗粒含量 水运工程混凝土施工规范JTJ268-1996 7 混凝土用轻集料 1. 筛分析/颗粒级配 1006 轻集料及其试验方法 第2部分: 轻集料试验方法 GB/T 17431.2-2010 2. 堆积密度 3. 筒压强度 4. 吸水率 5. 软化系数 6. 煮沸质量损失 7. 烧失量 8. 含泥量 9. 硫化物及硫酸盐 8 混凝土拌合用水 1. PH值1016 水质 PH值的测定 玻璃电极法 GB/T 6920-1986 2. 不溶物 水质 悬浮物的测定 GB/T 11901-1989 3. 可溶物 生活饮用水标准检验法:感官性状和物理指标GB 5750.4-2006 4. 氯离子 水质 氯化物的测定 硝酸银滴定法 GB/T 11896-1989 5. 硫酸盐 水质 硫酸盐的测定 重量法 GB/T 11899-1989 8 混凝土拌合用水 6. 碱含量 1016 水泥化学分析方法GB/T176-2008 7. 凝结时间 水泥标准稠度用水量、凝结时间、安定性检验方法 GB/T1346-2001 8. 凝结时间差 9. 抗压强度比 水泥胶砂强度检验方法(IS0法) GB/T17671-1999 9 外加剂 1. 固含量 1016 混凝土外加剂匀质性试验方法GB/T8077-2000 2. 含水率 3. 密度 4. 氯离子含量 5. 水泥净浆流动度 6. 水泥砂浆工作性 7. PH值8. 减水率 混凝土外加剂 GB 8076-2008 9. 细度 水泥细度检验方法 筛析法 GB/T 1345-2005 混凝土外加剂匀质性试验方法GB/T8077-2000 10. 硫酸钠 混凝土外加剂匀质性试验方法GB/T8077-2000 9 外加剂 11. 含气量 1016 普通混凝土拌合物性能试验方法 标准GB/T50080-2002 12. 抗冻性 普通砼长期性能和耐久性能试验方法标准 GB/T 50082-2009 13. 总碱量 混凝土外加剂匀质性试验方法GB/T8077-2000 水泥化学分析方GB/T176-2008 14. 凝结时间/凝结时间差 混凝土外加剂GB8076-2008 水泥标准稠度用水量、凝结时间、安定性检验方法GB/T1346-2001 喷射混凝土用速凝剂 JC477-2005 建筑砂浆基本性能试验方法标准 JGJ/T70-2009 15. 抗压强度比 混凝土外加剂GB8076-2008 砂浆、混凝土防水剂JC 474-2008 喷射混凝土用速凝剂 JC477-2005 16. 收缩率比 混凝土外加剂GB8076-2008 砂浆、混凝土防水剂JC 474-2008 17. 坍落度增加值/坍落度保留值 混凝土泵送剂JC473-2001 18. 常压泌水率比 19. 净浆安定性 水泥标准稠度用水量、凝结时间、安定性检验方法 GB/T1346-2001 9 外加剂 20. 透水压力比 1016 砂浆、混凝土防水剂JC 474-2008 21. 48h吸水量比 22. 渗透高度比 23. 限制膨胀率 混凝土膨胀剂 GB 23439-2009 24. 抗压强度 混凝土膨胀剂 GB 23439-2009 水泥胶砂强度检验方法 GB/T 17671-1999 25. 活性指数 高强高性能砼用矿物外加剂GB/T18736-2002 26. 需水量比 27. 竖向膨胀率 混凝土外加剂应用技术规范 GB50119-2003 10 掺合料 1. 细度 1016 用于水泥和混凝土中的粉煤灰GB/T1596-2005 2. 需水量比 3. 含水量 水泥化学分析方法 GB/T176-2008 4. 烧失量 5. 三氧化硫 6. 密度 水泥密度测定方法GB/T208-1994 10 掺合料 7. 活性指数 1016 用于水泥和混凝土中的粒化高炉矿渣粉 GB/T 18046-2008 8. 流动度比 11 普通混凝土 1. 坍落度 1002 普通混凝土拌合物性能试验方法 标准GB/T50080-2002 2. 拌合物凝结时间 3. 拌合物泌水率 4. 拌合物表观密度 5. 拌合物含气量 6. 抗压强度 普通混凝土力学性能试验方法标准GB/T50081-2002 钻芯法检测混凝土强度技术规程 CECS 03:2007 7. 受压弹性模量 普通混凝土力学性能试验方法标准 GB/T50081-2002 8. 抗拉强度 9. 抗折强度 10. 抗冻性能 普通砼长期性能和耐久性能试验方法标准 GB/T 50082-2009 11. 抗渗性能 11 普通混凝土 12. 收缩率 1002 普通砼长期性能和耐久性能试验方法标准 GB/T 50082-2009 13. 配合比 普通混凝土配合比设计规程 JGJ 55-2011 14. 氯离子 建筑结构检测技术标准 GB/T 50344-2004 15. 混凝土电通量 普通混凝土长期性能和耐久性能试验方法标准 GB/T 50082-2009 12 水泥基灌浆材料 1. 粒径 1005 水泥基灌浆材料 JC/T986-2005 2. 凝结时间 3. 泌水率 4. 流动度 5. 抗压强度 6. 竖向膨胀率 13 碳纤维片材 1. 拉伸强度 1016 定向纤维增强塑料拉伸性能试验方法 GB/T3354-1999 2. 拉伸弹性模量 3. 拉伸破坏伸长率 二 砌体结构材料 1 砖1. 尺寸 1009 砌墙砖试验方法 GB/T2542-2003 1 砖2. 外观 1009 砌墙砖试验方法 GB/T2542-2003 3. 吸水率和饱和系数 4. 体积密度 5. 干燥收缩 6. 抗折强度 混凝土路面砖JC/T446-2009 7. 抗压强度 8. 耐磨性 无机地面材料耐磨性能试验方法 GB/T12988-2009 9. 透水系数 透水砖JC/T945-2005 2 混凝土路缘石 1. 抗折强度 1016 混凝土路缘石 JC899-2002 2. 抗压强度 3. 吸水率 4. 外观 5. 尺寸 3 砌块 1. 尺寸 1009 混凝土小型空心砌块检验方法 GB/T4111-1997 石膏砌块 JC/T698-2010 2. 外观 混凝土小型空心砌块检验方法 GB/T4111-1997 3 砌块 3. 块体密度/干体积密度 1009 混凝土小型空心砌块检验方法 GB/T4111-1997 蒸压加气混凝土性能试验方法 GB/T 11969-2008 4. 空心率 混凝土小型空心砌块检验方法 GB/T4111-1997 5. 含水率 混凝土小型空心砌块检验方法 GB/T4111-1997 蒸压加气混凝土性能试验方法 GB/T 11969-2008 6. 吸水率 7. 抗压强度 8. 抗折强度 9. 抗渗性能 混凝土小型空心砌块检验方法 GB/T4111-1997 10. 干燥收缩 蒸压加气混凝土性能试验方法 GB/T 11969-2008 11. 轴心抗压强度 12. 劈裂抗拉强度 4 隔墙板 1. 外观 1016 工业灰渣砼空心隔墙条板 JG3063-1999 建筑隔墙用轻质条板 JG/T 169-2005 建筑用金属面绝热夹芯板 GB/T 23932-2009 灰渣混凝土空心隔墙板 GB/T23449-2009 4 隔墙板 2. 尺寸 1016 工业灰渣砼空心隔墙条板 JG3063-1999 建筑隔墙用轻质条板 JG/T 169-2005 建筑用金属面绝热夹芯板 GB/T 23932-2009 灰渣混凝土空心隔墙板 GB/T23449-2009 3. 抗冲击性能 工业灰渣砼空心隔墙条板 JG3063-1999 建筑隔墙用轻质条板 JG/T 169-2005 灰渣混凝土空心隔墙板 GB/T23449-2009 4. 抗压强度 5. 抗弯破坏荷载 6. 面密度 7. 干燥收缩值 8. 吊挂力 9. 含水率 建筑隔墙用轻质条板 JG/T 169-2005 灰渣混凝土空心隔墙板 GB/T23449-2009 10. 粘结强度 建筑用金属面绝热夹芯板 GB/T 23932-2009 11. 剥离性能 12. 抗弯承载力 三 砂浆 1 砂浆 1. 稠度 1001 建筑砂浆基本性能试验方法标准 JGJ/T 70-2009 2. 表观密度 3. 分层度 4. 抗冻性 5. 保塑时间内稠度损失率 预拌砂浆应用技术规范 SJG12-2010 6. 凝结时间 建筑砂浆基本性能试验方法标准 JGJ/T 70-2009 聚合物水泥防水砂浆 JC/T984-2005 7. 抗压强度 建筑砂浆基本性能试验方法标准 JGJ/T 70-2009 水泥胶砂强度检验方法 GB/T17671-1999 8. 抗折强度 水泥胶砂强度检验方法 GB/T17671-1999 9. 尺寸变化率/收缩率 建筑砂浆基本性能试验方法标准 JGJ/T 70-2009 地面用水泥基自流平砂浆 JC/T985-2005 10. 流动度 水泥胶砂流动度测定方法 GB/T2419-2005 地面用水泥基自流平砂浆 JC/T985-2005 1 砂浆 11. 保水性 1001 建筑砂浆基本性能试验方法标准 JGJ/T 70-2009 干混砂浆应用技术规程 DBJ/T15-36-2004 预拌砂浆生产技术规范 SJG11-2010 预拌砂浆应用技术规程 DBJ/T15-37-2004 预拌砂浆应用技术规范 SJG12-2010 预拌砂浆JG/T 230-2007 12. 抗渗压力 干混砂浆应用技术规程 DBJ/T15-36-2004 预拌砂浆生产技术规范 SJG11-2010 预拌砂浆应用技术规程 DBJ/T15-37-2004 预拌砂浆应用技术规范 SJG12-2010 聚合物水泥防水砂浆 JC/T984-2005 13. 拉伸粘结强度(未处理、浸水处理、热处理、碱处理、冻融循环) 干混砂浆应用技术规程 DBJ/T15-36-2004 预拌砂浆生产技术规范 SJG11-2010 预拌砂浆应用技术规程 DBJ/T15-37-2004 地面用水泥基自流平砂浆 JC/T985-2005 聚合物水泥防水砂浆 JC/T984-2005 蒸压加气混凝土用砌筑与抹面砂浆 JC890-2001 14. 抗冲击性 地面用水泥基自流平砂浆 JC/T985-2005 1 砂浆 15. 耐碱性 1001 聚合物水泥防水砂浆 JC/T984-2005 16. 耐热性 17. 导热系数 蒸压加气混凝土用砌筑与抹面砂浆JC890-2001 18. 晾置时间 混凝土界面处理剂 JC/T 907-2002 19. 剪切粘结强度 20. 砂浆配合比设计 砌筑砂浆配合比设计规程 JGJ 98-2010 2 陶瓷墙地砖填缝剂 1. 耐磨损性 1009 陶瓷墙地砖填缝剂 JC/T1004-2006 2. 收缩值 3. 抗折强度 4. 冻融循环后抗折强度 5. 抗压强度 6. 冻融循环后抗压强度 7. 吸水量 3 混凝土地面用水泥基耐磨材料 1. 抗折强度 1009 水泥胶砂强度检验方法 GB/T17671-1999 2. 抗压强度 3 混凝土地面用水泥基耐磨材料 3. 耐磨度比 1009 混凝土及其制品耐磨性试验方法 (滚珠轴承法)GB/T16925-1997 4. 表面强度 混凝土地面用水泥基耐磨材料 JC/T906-2002 四 金属结构材料及其制品/焊接件 1 钢筋/钢材 1. 屈服强度 0301 0201.01 金属材料 拉伸试验 第1部分:室温试验方法 GB/T 228.1-2010 2. 抗拉强度 3. 伸长率 4. 弯曲 金属材料弯曲试验方法 GB/T232-2010 5. 重量偏差 钢筋混凝土用钢 第2部分:热轧带肋钢筋GB1499.2-2007 钢筋混凝土用钢 第1部分:热轧光圆钢筋GB 1499.1-2008 6. 抗剪强度 销剪切试验方法GB/T13683-1992 7. 洛式硬度 金属材料 洛氏硬度试验 第1部分:试验方法(A、B、C、D、E、F、G、H、K、N、T标尺) GB/T 230.1-2009 1 钢筋/钢材 8. 碳含量 0301 0201.01 钢铁及合金 碳含量的测定 管式炉内燃烧后气体容量法 GB/T 223.69-2008 钢铁 总碳硫含量的测定高频感应炉燃烧后红外吸收法(常规方法) GB/T 20123-2006 9. 硫含量 钢铁及合金化学分析方法管式炉内燃烧后碘酸钾滴定法测定硫含量 GB/T223.68-1997 钢铁 总碳硫含量的测定高频感应炉燃烧后红外吸收法(常规方法) GB/T 20123-2006 10. 锰含量 钢铁及合金化学分析方法高碘酸钠(钾)光度法测定锰量 GB/T 223.63-1988 11. 硅含量 钢铁 酸溶硅和全硅含量的测定 还原型硅钼酸盐分光光度法GB/T223.5-2008 12. 磷含量 钢铁及合金 磷含量的测定 铋磷钼蓝分光光度法和锑磷钼蓝分光光度GB223.59-2008 2 冷轧带肋钢筋 部分参数 0301 0201.01 冷轧带肋钢筋GB13788-2008 只测:屈服强度、抗拉强度、伸长率、弯曲、重量偏差、碳含量、硫含量、锰含量、硅含量、磷含量 3 钢筋混凝土用钢 热轧带助钢筋 部分参数 0301 0201.01 钢筋混凝土用钢 第2部分:热轧带助钢筋GB1499.2-2007 只测:屈服强度、抗拉强度、伸长率、弯曲、重量偏差、碳含量、硫含量、锰含量、硅含量、磷含量 4 钢筋混凝土用钢 热轧光圆钢 部分参数 0301 0201.01 钢筋混凝土用钢 第1部分:热轧光圆钢筋GB 1499.1-2008 只测:屈服强度、抗拉强度、伸长率、弯曲、重量偏差、碳含量、硫含量、锰含量、硅含量、磷含量 5 预应力混凝土用螺纹钢筋 部分参数 0301 0201.01 预应力混凝土用螺纹钢筋GB/T20065-2006 只测:屈服强度、抗拉强度、伸长率、弯曲、重量偏差、碳含量、硫含量、锰含量、硅含量、磷含量 6 冷轧扭钢筋 部分参数 0301 0201.01 冷轧扭钢筋JG190-2006 只测:屈服强度、抗拉强度、伸长率、弯曲、重量偏差、碳含量、硫含量、锰含量、硅含量、磷含量 7 低合金高强度结构钢 部分参数 0301 0201.01 低合金高强度结构钢 GB/T1591-2008 只测:屈服强度、抗拉强度、伸长率、弯曲、抗剪强度、洛氏硬度、碳含量、硫含量、锰含量、硅含量、磷含量 8 连续热镀锌钢板及钢带 部分参数 0301 0201.01 连续热镀锌钢板及钢带 GB/T 2518-2008 只测:屈服强度、抗拉强度、伸长率、弯曲、抗剪强度、洛氏硬度、碳含量、硫含量、锰含量、硅含量、磷含量 9 优质碳素结构钢 部分参数 0301 0201.01 优质碳素结构钢 GB/T699-1999 只测:屈服强度、抗拉强度、伸长率、弯曲、抗剪强度、洛氏硬度、碳含量、硫含量、锰含量、硅含量、磷含量 10 碳素结构钢 部分参数 0301 0201.01 碳素结构钢 GB/T700-2006 只测:屈服强度、抗拉强度、伸长率、弯曲、抗剪强度、洛氏硬度、碳含量、硫含量、锰含量、硅含量、磷含量 11 彩色涂层钢板及钢带 部分参数 0301 0201.01 彩色涂层钢板及钢带 GB/T 12754-2006 只测:屈服强度、抗拉强度、伸长率、弯曲、抗剪强度、洛氏硬度、碳含量、硫含量、锰含量、硅含量、磷含量 12 预应力混凝土用钢丝 部分参数 0301 0201.01 预应力混凝土用钢丝 GB/T 5223-2002 只测:屈服强度、抗拉强度、伸长率 13 一般用途低碳钢丝 部分参数 0301 0201.01 一般用途低碳钢丝 YB/T 5294-2009 只测:屈服强度、抗拉强度、伸长率 14 钢产品镀锌层 1. 镀锌层质量/厚度 0301 钢产品镀锌层质量检验方法 GB/T 1839-2008 金属覆盖层 钢铁制件热浸镀锌层技术要求及试验方法 GB/T13912-2002 15 钢材焊件 1. 抗拉强度 0303 焊接接头拉伸试验方法 GB/T2651-2008 2. 弯曲 焊接接头弯曲试验方法 GB/T2653-2008 16 钢筋焊接 1. 抗拉强度 0303 钢筋焊接接头试验方法标准 JGJ/T 27-2001 2. 弯曲 钢筋焊接接头试验方法标准 JGJ/T 27-2001 钢筋焊接网混凝土结构技术规程 JGJ/T114-2003 3. 抗剪力 钢筋混凝土用钢 第3部分:钢筋焊接网 GB/T 1499.3-2010 17 钢筋机械连接 1. 抗拉强度 0323 钢筋机械连接技术规程 JGJ 107-2010 滚轧直螺纹钢筋连接接头 JG 163-2004 镦粗直螺纹钢筋接头 JG 171-2005 2. 残余变形 钢筋机械连接技术规程 JGJ 107-2010 18 钢绞线、锚夹具 1. 抗拉强度 0301 预应力混凝土用钢绞线 GB/T5224-2003(2008) 2. 最小破断荷载 3. 规定非比例延伸荷载 4. 最大力总伸长率 5. 弹性模量 6. 洛氏硬度 预应力筋用锚具、夹具和连接器 GB/T 14370-2007 金属材料 洛氏硬度试验 第1部分:试验方法(A、B、C、D、E、F、G、H、K、N、T标尺) GB/T 230.1-2009 19 预应力混凝土用金属波纹管 1. 尺寸 0315 预应力混凝土用金属波纹管 JG 225-2007 2. 外观 3. 集中荷载下径向刚度 4. 均布荷载下径向刚度 5. 荷载作用后抗渗漏 6. 抗弯曲渗漏 20 钢管脚手架扣件 1. 抗拉 0323 钢管脚手架扣件 GB15831-2006 20 钢管脚手架扣件 2. 抗压 323 钢管脚手架扣件 GB15831-2006 3. 抗滑移 4. 抗破坏 21 钢制电缆桥架 1. 电缆桥架荷载试验 0323 钢制电缆桥架工程设计规范CECS:31-2006 22 建筑用轻钢龙骨 1. 外观质量 0301 建筑用轻钢龙骨 GB/T 11981-2008 2. 尺寸 3. 静载试验 4. 表面防锈 五 预制混凝土构配件 1 预制预应力混凝土楼板 1. 承载力 1017 混凝土结构工程施工质量验收规范GB50204-2002(2011) 2. 挠度 3. 裂缝宽度 2 混凝土和钢筋混凝土排水管 1. 外观质量 0339 混凝土和钢筋混凝土排水管试验方法 GB/T 16752-2006 2. 几何尺寸 3. 内水压力 2 混凝土和钢筋混凝土排水管 4. 外压荷载 339 混凝土和钢筋混凝土排水管试验方法 GB/T 16752-2006 5. 保护层厚度 3 混凝土输水管 1. 外观质量 0339 混凝土输水管试验方法 GB/T 15345-2003 2. 几何尺寸 3. 水压试验 4. 保护层厚度 六 装饰装修材料 1 装饰涂料 1. 容器中状态 0215 合成树脂乳液外墙涂料 GB/T9755-2001 合成树脂乳液内墙涂料 GB/T9756-2009 溶剂型外墙涂料 GB/T9757-2001 外墙无机建筑涂料 JG/T26-2002 复层建筑涂料 GB/T9779-2005 建筑合成树脂乳液砂壁状建筑涂料 JG/T24-2000 建筑内外墙用底漆 JC/T210-2007 弹性建筑涂料 JG/T172-2005 交联型氟树脂涂料 HG/T3792-2005 1 装饰涂料 2. 施工性/刷涂性 215 合成树脂乳液外墙涂料 GB/T9755-2001 合成树脂乳液内墙涂料 GB/T9756-2009 溶剂型外墙涂料 GB/T9757-2001 外墙无机建筑涂料 JG/T26-2002 建筑合成树脂乳液砂壁状建筑涂料 JG/T24-2000 建筑内外墙用底漆 JC/T210-2007 弹性建筑涂料 JG/T172-2005 3. 涂膜外观 合成树脂乳液外墙涂料 GB/T9755-2001 合成树脂乳液内墙涂料 GB/T9756-2009 溶剂型外墙涂料 GB/T9757-2001 外墙无机建筑涂料 JG/T26-2002 复层建筑涂料 GB/T9779-2005 外墙外保温用环保型硅丙乳液复层涂料 JG/T206-2007 建筑内外墙用底漆 JC/T210-2007 弹性建筑涂料 JG/T172-2005 交联型氟树脂涂料 HG/T3792-2005 1 装饰涂料 4. 低温稳定性 215 合成树脂乳液外墙涂料 GB/T9755-2001 合成树脂乳液内墙涂料 GB/T9756-2009 外墙无机建筑涂料 JG/T26-2002 复层建筑涂料 GB/T9779-2005 建筑合成树脂乳液砂壁状建筑涂料 JG/T24-2000 建筑内外墙用底漆 JC/T210-2007 弹性建筑涂料 JG/T172-2005 5. 对比率 合成树脂乳液外墙涂料 GB/T9755-2001 合成树脂乳液内墙涂料 GB/T9756-2009 溶剂型外墙涂料 GB/T9757-2001 外墙无机建筑涂料 JG/T26-2002 建筑合成树脂乳液砂壁状建筑涂料 JG/T24-2000 弹性建筑涂料 JG/T172-2005 交联型氟树脂涂料 HG/T3792-2005 1 装饰涂料 6. 耐沾污性 215 合成树脂乳液外墙涂料 GB/T9755-2001 合成树脂乳液内墙涂料 GB/T9756-2009 溶剂型外墙涂料 GB/T9757-2001 外墙无机建筑涂料 JG/T26-2002 复层建筑涂料 GB/T9779-2005 外墙外保温用环保型硅丙乳液复层涂料 JG/T206-2007 弹性建筑涂料 JG/T172-2005 交联型氟树脂涂料 HG/T3792-2005 7. 干燥时间 漆膜、腻子膜干燥时间测定法 GB/T1728-1979(1989) 8. 耐水性 漆膜耐水性测定法GB/T1733-1993 交联型氟树脂涂料 HG/T3792-2005 9. 耐碱性 建筑涂料 涂层耐碱性的测定GB9265-2009 10. 耐洗刷性 建筑涂料 涂层耐洗刷性的测定GB9266-2009 11. 耐温变性/耐冻融循环性 建筑涂料 涂层耐冻融循环性测定法 JG/T25-1999 12. 初期干燥抗裂性 建筑合成树脂乳液砂壁状建筑涂料 JG/T24-2000 复层建筑涂料GB/T9779-2005 1 装饰涂料 13. 粘结强度(标准状态、浸水后、冻融循环后) 215 建筑合成树脂乳液砂壁状建筑涂料 JG/T24-2000 复层建筑涂料GB/T9779-2005 14. 耐冲击性 漆膜耐冲击测定法GB/T1732-1993 15. 固体含量/不挥发物含量 色漆、清漆和塑料 不挥发物含量的测定 GB/T 1725-2007 16. 柔韧性 漆膜柔韧性测定法GB/T1731-1993 17. 附着力 漆膜附着力测定法GB1720-1979 色漆和清漆 漆膜的划格试验 GB/T9286-1998 只测:划圈法、划格法 18. 耐盐水性 漆膜耐化学试剂性测定法 GB/T 1763-1979 19. 遮盖力 涂料遮盖力测定法 GB1726-1979 20. 透水性 复层建筑涂料GB/T9779-2005 2 防火涂料 1. 容器中状态 0215 钢结构防火涂料GB 14907-2002 饰面型防火涂料GB 12441-2005 2. 干燥时间 3. 初期干燥抗裂性 钢结构防火涂料GB 14907-2002 4. 粘结强度 2 防火涂料 5. 耐水性 215 钢结构防火涂料GB 14907-2002 6. 细度 饰面型防火涂料GB 12441-2005 7. 附着力 8. 柔韧性 9. 耐冲击 10. 耐湿热性 3 腻子 1. 在容器中状态 0215 建筑室内用腻子 JG/T298-2010 外墙外保温柔性耐水腻子 JG/T 229-2007 2. 施工性/刷涂性 建筑外墙用腻子 JG/T 157-2009 建筑室内用腻子 JG/T298-2010 外墙外保温柔性耐水腻子 JG/T 229-2007 3. 干燥时间 漆膜、腻子膜干燥时间测定法 GB/T1728-1979(1989) 4. 耐水性 漆膜耐水性测定法GB/T1733-1993 5. 耐碱性 建筑涂料 涂层耐碱性的测定GB9265-2009 3 腻子 6. 粘结强度(标准状态、浸水后、冻融循环后) 215 外墙外保温柔性耐水腻子 JG/T 229-2007 7. 耐磨性 建筑室内用腻子 JG/T298-2010 建筑外墙用腻子JG/T 157-2009 外墙外保温柔性耐水腻子 JG/T 229-2007 8. 低温储存稳定性 建筑室内用腻子 JG/T298-2010 建筑外墙用腻子JG/T 157-2009 9. 动态抗开裂性 建筑外墙用腻子JG/T 157-2009 10. 吸水量 建筑外墙用腻子JG/T 157-2009 外墙外保温柔性耐水腻子 JG/T 229-2007 4 陶瓷砖 1. 尺寸 0309 陶瓷砖试验方法 第2部分:尺寸和表面质量的检验 GB/T 3810.2-2006 2. 外观 3. 平整度 4. 吸水率 陶瓷砖试验方法 第3部分:吸水率、显气孔率、表观相对密度和容重的测定 GB/T 3810.3-2006 4 陶瓷砖 5. 抗热震性 309 陶瓷砖试验方法 第9部分:抗热震性的测定 GB/T 3810.9-2006 陶瓷马赛克 JC 456-2005 6. 湿膨胀 陶瓷砖试验方法 第10部分:湿膨胀的测定 GB/T 3810.10-2006 7. 耐化学腐蚀性 陶瓷砖试验方法 第13部分:耐化学腐蚀性的测定 GB/T 3810.13-2006 8. 断裂模数/破坏强度 陶瓷砖试验方法 第4部分:断裂模数和破坏强度的测定 GB/T 3810.4-2006 9. 抗冻性 陶瓷砖试验方法 第12部分:抗冻性的测定 GB/T 3810.12-2006 10. 无釉砖耐磨深度 陶瓷砖试验方法 第6部分:无釉砖耐磨深度的测定 GB/T 3810.6-2006 11. 成联质量 陶瓷马赛克JC 456-2005 12. 热稳定性 玻璃马赛克GB/T 7697-1996 13. 化学稳定性 14. 光泽度 建筑饰面材料镜向光泽度测定方法 GB/T13891-2008 5 天然饰面石材 1. 外观 0309 天然花岗石建筑板材GB/T18601-2009 天然大理石建筑板材 GB/T 19766-2005 干挂饰面石材及其金属挂件 第1部分:干挂饰面石材JC830.1-2005 天然砂岩建筑板材 GB/T 23452-2009 天然石灰石建筑板材 GB/T 23453-2009 2. 尺寸 3. 角度 4. 平面度 5. 体积密度 天然饰面石材试验方法体积密度、真密度、真气孔率、吸水率试验方法 GB/T9966.3-2001 6. 吸水率 7. 压缩强度(干燥、水饱和、冻融循环) 天然饰面石材试验方法干燥、水饱和、冻融循环后压缩强度试验方法 GB/T9966.1-2001 8. 弯曲强度(干燥、水饱和) 天然饰面石材试验方法干燥、水饱和弯曲强度试验方法 GB/T9966.2-2001 9. 镜面光泽度 建筑饰面材料镜向光泽度测定方法GB/T13891-2008 6 人工装饰石材 1. 尺寸 0309 出口人造石检验方法 SN/T 0308-1993 2. 密度 3. 吸水率 4. 抗折强度 5. 抗压强度 7 混凝土瓦 1. 尺寸 1003 混凝土瓦 JC/T 746-2007 2. 外观 3. 吸水率 4. 承载力 5. 不透水性(抗渗性能) 6. 抗冻性 8 装饰板材 1 外观 0309 装饰石膏板 JC/T 799-2007 纸面石膏板 GB/T 9775-2008 矿物棉装饰吸声板JC/T670-2005 建筑幕墙用铝塑复合板GB/T17748-2008 玻镁平板JC 688-2006 纤维水泥平板 第1部分:无石棉纤维水泥平板 JC/T 412.1-2006 纤维水泥平板 第2部分:温石棉纤维水泥平板 JC/T 412.2-2006 纤维增强硅酸钙板 第1部分:无石棉硅酸钙板 JC/T 564.1-2008 纤维增强硅酸钙板 第2部分:温石棉硅酸钙板 JC/T 564.2-2008 纤维增强低碱度水泥建筑平板 JC/T 626-2008 维纶纤维增强水泥平板 JC/T 671-2008 2 尺寸 8 装饰板材 2 尺寸 309 矿物棉装饰吸声板 GB/T25998-2010 普通装饰用铝塑复合板 GB/T22412-2008 建筑装饰用铝单板 GB/T23443-2009 金属及金属复合材料吊顶板 GB/T23444-2009 金属及金属复合材料吊顶板 JC/T1059-2007 3 断裂荷载/抗折强度 纸面石膏板GB /T 9775-2008 装饰石膏板 JC/T 799-2007 矿物棉装饰吸声板JC/T670-2005 纤维水泥制品试验方法 GB/T 7019-1997 矿物棉装饰吸声板GB/T25998-2010 4 对角线长度差 纸面石膏板GB /T 9775-2008 5 平面度偏差 装饰石膏板 JC/T 799-2007 6 涂层厚度 非磁性金属基体上非导电覆盖层厚度测量 涡流方法GB/T4957-2003 7 单位面积质量 装饰石膏板 JC/T 799-2007 装饰纸面石膏板 JC/T997-2006 8 装饰板材 8 含水率/含湿率 309 装饰石膏板 JC/T 799-2007 矿物棉装饰吸声板JC/T670-2005 纤维水泥制品试验方法 GB/T 7019-1997 矿物棉装饰吸声板GB/T25998-2010 9 吸水率 纸面石膏板GB /T 9775-2008 装饰石膏板 JC/T 799-2007 纤维水泥制品试验方法 GB/T 7019-1997 10 不透水性 纤维水泥制品试验方法 GB/T 7019-1997 11 体积密度 12 湿胀率 13 干缩率 14 抗冻性 8 装饰板材 15 光泽度偏差 0309 色漆和清漆 不含金属颜料的色漆漆膜的20°、60°和85°镜面光泽的测定 GB/T9754-2007 建筑饰面材料镜向光泽度测定方法GB/T13891-2008 8 装饰板材 16 弯曲强度 309 纤维水泥制品试验方法 GB/T 7019-1997 人造板及饰面人造板理化性能试验方法 GB/T17657-1999 建筑幕墙用铝塑复合板GB/T17748-2008 普通装饰用铝塑复合板GB/T22412-2008 17 弯曲弹性模量 建筑幕墙用铝塑复合板GB/T17748-2008 18 面密度 纸面石膏板GB /T 9775-2008 19 剪切强度 铝塑复合板GB/T17748-2008 20 贯穿阻力 21 涂膜柔韧性 建筑幕墙用铝塑复合板GB/T17748-2008 普通装饰用铝塑复合板GB/T22412-2008 22 耐热水性 23 耐碱性 建筑幕墙用铝塑复合板GB/T17748-2008 普通装饰用铝塑复合板GB/T22412-2008 金属及金属复合材料吊顶板 GB/T 23444-2009 金属及金属复合材料吊顶板 JC/T 1059-2007 8 装饰板材 24 耐油性 309 建筑幕墙用铝塑复合板GB/T17748-2008 普通装饰用铝塑复合板GB/T22412-2008 金属及金属复合材料吊顶板 GB/T 23444-2009 金属及金属复合材料吊顶板 JC/T 1059-2007 25 耐盐酸性 建筑幕墙用铝塑复合板GB/T17748-2008 普通装饰用铝塑复合板GB/T22412-2008 建筑装饰用铝单板GB/T23443-2009 金属及金属复合材料吊顶板GB/T23444-2009 金属及金属复合材料吊顶板JC/T1059-2007 26 受潮挠度 装饰石膏板 JC/T 799-2007 矿物棉装饰吸声板JC/T670-2005 27 铅笔硬度 色漆和清漆 铅笔法测定漆膜硬度 GB/T6739-2006 28 漆膜硬度 29 附着力 漆膜附着力测定法GB1720-1979 色漆和清漆 漆膜的划格试验 GB/T9286-1998 30 耐冲击性 漆膜耐冲击测定法GB/T1732-1993 8 装饰板材 31 耐沾污性 309 建筑涂料涂层耐沾污性试验方法GB/T9780-2005 32 热变形温度 塑料 负荷变形温度的测定 第1部分:通用试验方法 GB/T1634.1-2004 33 剥离强度/剥离力 胶粘剂180°剥离强度试验方法挠性材料对刚性材料GB/T2790-1995 铝塑复合板GB/T17748-2008 34 抗返卤性 玻镁平板JC 688-2006 35 耐溶剂性 建筑幕墙用铝塑复合板GB/T17748-2008 普通装饰用铝塑复合板GB/T22412-2008 建筑装饰用铝单板 GB/T23443-2009 9 装饰用微晶玻璃 1. 外观 0310 建筑装饰用微晶玻璃 JC/T 872-2000 2. 尺寸 3. 平面度偏差 4. 角度公差 5. 弯曲强度 6. 耐酸性 7. 耐碱性 9 装饰用微晶玻璃 8. 耐急冷急热性 310 建筑装饰用微晶玻璃 JC/T 872-2000 9. 光泽度偏差 建筑饰面材料镜向光泽度测定方法GB/T13891-2008 10 漆1. 容器中状态 0215 富锌底漆HG/T 3668-2009 红丹醇酸防锈漆HG/T 3346-1999 钢结构桥梁漆HG/T 3656-1999 交联型氟树脂涂料HG/T3792-2005 地坪涂料HG/T3829-2006 建筑用钢结构防腐涂料JG/T224-2007 2. 漆膜外观 富锌底漆HG/T 3668-2009 各色酚醛防锈漆HG/T 3345-1999 红丹醇酸防锈漆HG/T 3346-1999 钢结构桥梁漆HG/T 3656-1999 交联型氟树脂涂料HG/T3792-2005 建筑用钢结构防腐涂料JG/T224-2007 3. 细度 4. 耐弯曲性/柔韧性 漆膜柔韧性测定法GB/T1731-1993 钢结构桥梁漆HG/T 3656-1999 红丹醇酸防锈漆HG/T 3346-1999 建筑用钢结构防腐涂料JG/T224-2007 10 漆5. 耐冲击性 215 钢结构桥梁漆HG/T 3656-1999 富锌底漆HG/T 3668-2009 各色酚醛防锈漆HG/T 3345-1999 交联型氟树脂涂料HG/T3792-2005 地坪涂料 HG/T3829-2006 建筑用钢结构防腐涂料JG/T224-2007 6. 干燥时间 钢结构桥梁漆HG/T 3656-1999 富锌底漆HG/T 3668-2009 各色酚醛防锈漆HG/T 3345-1999 红丹醇酸防锈漆HG/T 3346-1999 交联型氟树脂涂料HG/T3792-2005 地坪涂料 HG/T3829-2006 建筑用钢结构防腐涂料JG/T224-2007 7. 耐水性 钢结构桥梁漆HG/T 3656-1999 交联型氟树脂涂料HG/T3792-2005 地坪涂料HG/T3829-2006 建筑用钢结构防腐涂料JG/T224-2007 8. 附着力 漆膜附着力测定法GB/T1720-1979 钢结构桥梁漆HG/T 3656-1999 交联型氟树脂涂料HG/T3792-2005 地坪涂料HG/T3829-2006 建筑用钢结构防腐涂料JG/T224-2007 10 漆9. 耐盐水性 215 钢结构桥梁漆HG/T 3656-1999 各色酚醛防锈漆HG/T 3345-1999 红丹醇酸防锈漆HG/T 3346-1999 地坪涂料 HG/T3829-2006 建筑用钢结构防腐涂料JG/T224-2007 10. 施工性/刷涂性 钢结构桥梁漆HG/T 3656-1999 富锌底漆HG/T 3668-2009 红丹醇酸防锈漆HG/T 3346-1999 建筑用钢结构防腐涂料JG/T224-2007 11. 固体含量/不挥发物含量 红丹醇酸防锈漆HG/T 3346-1999 交联型氟树脂涂料HG/T3792-2005 地坪涂料 HG/T3829-2006 11 建筑材料有害物质 1. 游离甲醛 0244 人造板及饰面人造板理化性能试验方法 GB/T17657-1999 室内装饰装修材料人造板及其制品中甲醛释放限量 GB 18580-2001 室内装饰装修材料内墙涂料中有害物质限量 GB18582-2008 室内装饰装修材料 胶粘剂中有害物质限量 GB18583-2008 室内装饰装修材料木家具中有害物质限量 GB18584-2001 室内装饰装修材料壁纸中有害物质限量 GB18585-2001 室内装饰装修材料地毯、地毯衬垫及地毯胶粘剂中有害物质释放限量 GB18587-2001 民用建筑工程室内环境污染控制规范 GB50325-2010 水性涂料中甲醛含量的测定 乙酰丙酮分光光度法 GB/T 23993-2009 建筑防水涂料中有害物质限量 JC 1066-2008 室内装饰装修材料 建筑用外墙涂料中有害物质限量 GB 24408-2009 室内装饰装修材料 水性木器涂料中有害物质限量 GB 24410-2009 11 建筑材料有害物质 2. 挥发性有机化合物 0244 室内装饰装修材料 溶剂型木器涂料中有害物质限量 GB18581-2009 室内装饰装修材料内墙涂料中有害物质限量 GB18582-2008 室内装饰装修材料聚氯乙烯卷材地板中有害物质限量 GB18586-2001 建筑用外墙涂料中有害物质限量 GB 24408-2009 室内装饰装修材料 水性木器涂料中有害物质限量 GB 24410-2009 民用建筑工程室内环境污染控制规范 GB 50325-2010 建筑防水涂料中有害物质限量 JC 1066-2008 3. 总挥发性有机化合物 室内装饰装修材料 胶粘剂中有害物质限量 GB18583-2008 室内装饰装修材料地毯、地毯衬垫及地毯胶粘剂中有害物质释放限量 GB18587-2001 民用建筑工程室内环境污染控制规范 GB50325-2010 11 建筑材料有害物质 4. 苯244 室内装饰装修材料 溶剂型木器涂料中有害物质限量GB18581-2009 室内装饰装修材料 胶粘剂中有害物质限量 GB18583-2008 建筑用外墙涂料中有害物质限量 GB 24408-2009 建筑防水涂料中有害物质限量 JC 1066-2008 民用建筑工程室内环境污染控制规范 GB 50325-2010 5. 甲苯、乙苯和二甲苯总和 室内装饰装修材料 溶剂型木器涂料中有害物质限量GB18581-2009 建筑防水涂料中有害物质限量 JC 1066-2008 室内装饰装修材料 建筑用外墙涂料中有害物质限量 GB 24408-2009 民用建筑工程室内环境污染控制规范 GB 50325-2010 11 建筑材料有害物质 6. 苯、甲苯、乙苯、二甲苯总和 0244 室内装饰装修材料内墙涂料中有害物质限量GB18582-2008 室内装饰装修材料 水性木器涂料中有害物质限量 GB 24410-2009 建筑防水涂料中有害物质限量 JC 1066-2008 11 建筑材料有害物质 7. 甲苯、二甲苯总和 244 室内装饰装修材料 胶粘剂中有害物质限量 GB18583-2008 民用建筑工程室内环境污染控制规范 GB 50325-2010 8. 游离甲苯二异氰酸酯 色漆和清漆用漆基 异氰酸酯树脂中二异氰酸酯单体的测定 GB18446-2009 室内装饰装修材料 胶粘剂中有害物质限量 GB18583-2008 9. 氯乙烯单体 室内装饰装修材料聚氯乙烯卷材地板中有害物质限量 GB18586-2001 10. 苯乙烯 室内装饰装修材料地毯、地毯衬垫及地毯胶粘剂中有害物质释放限量 GB18587-2001 11. 4-苯基环已烯 12. 丁基羟基甲苯 13. 2-乙基已醇 14. 内照射指数 建筑材料放射性核素限量 GB6566-2010 15. 外照射指数 16. 氨 混凝土外加剂中释放氨的限量 GB18588-2001 12 土壤中有害物质 1. 氡浓度 0244 民用建筑工程室内环境污染控制规范GB50325-2010 12 土壤中有害物质 2. 表面氡析出率 244 民用建筑工程室内环境污染控制规范GB50325-2010 13 防静电活动地板 1. 尺寸 0309 防静电活动地板通用规范 SJ/T 10796-2001 2. 外观 3. 活动地板电性能 4. 荷载性能 限集中荷载和极限集中荷载 5. 耐冲击性能 6. 可调支撑的允许使用荷载 七 防水材料 1 防水卷(片)材1. 拉伸强度/拉力 0211 0323 建筑防水卷材试验方法 第8部分:沥青防水卷材 拉伸性能 GB/T328.8-2007 硫化橡胶或热塑性橡胶拉伸应力应变性能的测定 GB/T528-2009 弹性体改性沥青防水卷材 GB18242-2008 APP塑性体改性沥青防水卷材 GB 18243-2008 聚氯乙烯防水卷材GB12952-2003 氯化聚乙烯防水卷材GB 12953-2003 1 防水卷(片)材2. 延伸率/断裂伸长率 0211 0323 建筑防水卷材试验方法 第8部分:沥青防水卷材 拉伸性能 GB/T328.8-2007 硫化橡胶或热塑性橡胶拉伸应力应变性能的测定 GB/T528-2009 弹性体改性沥青防水卷材 GB18242-2008 APP塑性体改性沥青防水卷材 GB 18243-2008 聚氯乙烯防水卷材GB12952-2003 氯化聚乙烯防水卷材GB 12953-2003 3. 柔度/低温弯折性 建筑防水卷材试验方法 第14部分:沥青防水卷材 低温柔性 GB/T328.14-2007 聚氯乙烯防水卷材 GB12952-2003 氯化聚乙烯防水卷材 GB 12953-2003 自粘聚合物改性沥青防水卷材 GB 23441-2009 弹性体改性沥青防水卷材 GB18242-2008 4. 不透水性 建筑防水卷材试验方法 第10部分:沥青和高分子防水卷材 不透水性 GB/T328.10-2007 高分子防水材料(第一部分片材) GB 18173.1-2006 5. 耐热度/耐热性 建筑防水卷材试验方法 第11部分:沥青防水卷材 耐热性 GB/T328.11-2007 1 防水卷(片)材6. 撕裂强度 0211 0323 建筑防水卷材试验方法 第18部分:沥青防水卷材 撕裂性能(钉杆法) GB/T328.18-2007 硫化橡胶或热塑性橡胶拉伸应力应变性能的测定 GB/T528-2009 硫化橡胶或热塑性橡胶撕裂强度的测定(裤形、直角形和新月形试样) GB/T529-2008 1 防水卷(片)材7. 尺寸稳定性/热处理尺寸变化率 0211 0323 建筑防水卷材试验方法 第12部分:沥青防水卷材 尺寸稳定性 GB/T328.12-2007 聚氯乙烯防水卷材GB12952-2003 氯化聚乙烯防水卷材GB 12953-2003 高分子防水材料(第一部分片材) GB 18173.1-2006 8. 人工气候加速老化 建筑防水材料老化试验方法GB/T18244-2000 9. 剥离强度 建筑防水卷材试验方法 第20部分:沥青防水卷材 接缝剥离性能 GB/T328.20-2007 自粘聚合物改性沥青防水卷材 GB 23441-2009 硫化橡胶或热塑性橡胶与织物粘合强度的测定 GB/T532-2008 高分子防水材料(第一部分片材) GB 18173.1-2006 1 防水卷(片)材10. 抗穿孔性 0211 0323 聚氯乙烯防水卷材GB12952-2003 氯化聚乙烯防水卷材GB 12953-2003 11. 剪切性能 建筑防水卷材试验方法 第22部分:沥青防水卷材 接缝剪切性能 GB/T328.22-2007 聚氯乙烯防水卷材GB12952-2003 自粘橡胶沥青防水卷材 JC840-1999 12. 剪切状态下的粘合性 高分子防水材料(第一部分片材) GB 18173.1-2006 13. 卷材下面沥青涂盖层厚度 道桥用改性沥青防水卷材 JC/T974-2005 弹性体改性沥青防水卷材 GB18242-2008 APP塑性体改性沥青防水卷材 GB 18243-2008 14. 可溶物含量 建筑防水卷材试验方法 第26部分:沥青防水卷材 可溶物含量(浸涂材料含量) GB/T328.26-2007 道桥用改性沥青防水卷材 JC/T974-2005 15. 耐碱性/盐处理 道桥用改性沥青防水卷材JC/T974-2005 16. 热老化处理 道桥用改性沥青防水卷材 JC/T974-2005 弹性体改性沥青防水卷材 GB18242-2008 APP塑性体改性沥青防水卷材 GB 18243-2008 1 防水卷(片)材17. 钉杆水密性 0211 0323 自粘聚合物改性沥青防水卷材 GB 23441-2009 18. 渗油性 自粘聚合物改性沥青防水卷材 GB 23441-2009 预铺/湿铺防水卷材 GB/T 23457-2009 19. 持粘性 20. 热老化 21. 热稳定性 22. 撕裂强度 预铺/湿铺防水卷材 GB/T 23457-2009 2 防水涂料 1. 拉伸强度 0211 0323 建筑防水涂料试验方法 GB/T16777-2008 聚合物乳液建筑防水涂料 JC/T864-2008 聚氨酯防水涂料GB/T19250-2003 道桥用防水涂料JC/T975-2005 聚合物水泥防水涂料 GB/T 23445-2009 2. 断裂伸长率 3. 不透水性 4. 柔度/低温弯折性 2 防水涂料 5. 固体含量 0211 0323 建筑防水涂料试验方法 GB/T16777-2008 聚氨酯防水涂料GB/T19250-2003 道桥用防水涂料JC/T975-2005 聚合物水泥防水涂料 GB/T 23445-2009 6. 干燥时间(表干时间、实干时间) 建筑防水涂料试验方法 GB/T16777-2008 聚氨酯防水涂料GB/T19250-2003 道桥用防水涂料JC/T975-2005 7. 加热伸缩率 建筑防水涂料试验方法 GB/T16777-2008 聚氨酯防水涂料 GB/T19250-2003 8. 定伸时的老化 聚氨酯防水涂料GB/T19250-2003 9. 粘结强度 建筑防水涂料试验方法 GB/T16777-2008 聚氨酯防水涂料GB/T19250-2003 道桥用防水涂料JC/T975-2005 聚合物水泥防水涂料 GB/T 23445-2009 10. 抗渗性 聚合物水泥防水涂料 GB/T 23445-2009 11. 耐热度 道桥用防水涂料JC/T975-2005 水乳型沥青防水涂料JC/T408-2005 12. 抗裂性 溶剂型橡胶沥青防水涂料 JC/T 852-1999 13. 盐处理 道桥用防水涂料JC/T975-2005 2 防水涂料 14. 酸处理、碱处理 0211 0323 建筑防水涂料试验方法 GB/T16777-2008 聚合物乳液建筑防水涂料 JC/T864-2008 聚氨酯防水涂料GB/T19250-2003 水乳型沥青防水涂料JC/T408-2005 15. 紫外线处理 建筑防水涂料试验方法 GB/T16777-2008 水乳型沥青防水涂料JC/T408-2005 16. 热老化处理 建筑防水涂料试验方法 GB/T16777-2008 道桥用防水涂料JC/T975-2005 水乳型沥青防水涂料JC/T408-2005 3 刚性防水材料 1. 凝结时间 0323 水泥标准稠度用水量、凝结时间、安定性检验方法GB/T1346-2001 2. 安定性 3. 抗压强度 水泥胶砂强度检验方法(IS0法) GB/T17671-1999 4. 抗折强度 5. 粘结强度 无机防水堵漏材料 GB 23440-2009 6. 抗渗压力 砂浆、混凝土防水剂JC 474-2008 7. 耐热性 无机防水堵漏材料 GB 23440-2009 3 刚性防水材料 8. 冻融循环 323 普通砼长期性能和耐久性能试验方法标准 GB/T 50082-2009 9. 含水量 混凝土外加剂匀质性试验方法GB/T8077-2000 10. 氯离子含量 11. 细度 12. 总碱量 混凝土外加剂GB8076-2008 13. 减水率 14. 泌水率 15. 含气量 16. 收缩率 17. 钢筋锈蚀 4 防水剂 1. 外观 0318 水性渗透型无机防水剂 JC/T 1018-2006 建筑表面用有机硅防水剂 JC/T902-2002 2. PH值 混凝土外加剂匀质性试验方法GB/T8077-2000 3. 吸水率比 建筑表面用有机硅防水剂 JC/T902-2002 4 防水剂 4. 渗透性(标准状态、热处理、低温处理、紫外线处理、酸处理、碱处理) 318 建筑表面用有机硅防水剂 JC/T902-2002 5. 粘度 涂料粘度测定法GB1723-1993 6. 凝胶化时间 水性渗透型无机防水剂 JC/T 1018-2006 7. 抗渗性/渗入高度 8. 稳定性 5 防护剂 1. 防水性 0318 建筑装饰用天然石材保护剂JC/T973-2005 2. 耐污性 3. 耐酸性 4. 耐碱性 5. 耐紫外线老化 八 密封材料 1 嵌缝密封材料 1. 外观 0223 混凝土建筑接缝用密封胶 JC/T 881-2001 幕墙玻璃接缝用密封胶 JC/T 882-2001 石材用建筑密封胶 GB/T 23261-2009 建筑用硅酮结构密封胶 GB 16776-2005 硅酮建筑密封胶 GB/T 14683-2003 2. 密度 建筑密封材料试验方法 第2部分:密度的测定 GB/T13477.2-2002 3. 表干时间 建筑密封材料试验方法 第5部分:表干时间的测定 GB/T13477.5-2002 4. 流动性/下垂度 建筑密封材料试验方法 第6部分:流动性的测定 GB/T 13477.6-2002 1 嵌缝密封材料 5. 拉伸粘结性/拉抻粘结强度/拉伸模量 0223 建筑密封材料试验方法 第8部分:拉伸粘结性的测定GB/T13477.8-2002 6. 断裂伸长率 7. 浸水后拉伸粘结性/拉抻粘结强度/拉伸模量 建筑密封材料试验方法 第9部分:浸水后拉伸粘结性的测定 GB/T13477.9-2002 8. 浸水后断裂伸长率 1 嵌缝密封材料 9. 定伸粘结性 223 建筑密封材料试验方法 第10部分:定伸粘结性的测定 GB/T13477.10-2002 10. 浸水后定伸粘结性 建筑密封材料试验方法 第11部分:浸水后定伸粘结性的测定 GB/T 13477.11-2002 11. 拉伸-压缩循环后粘结性 建筑密封材料试验方法 第12部分:同一温度下拉伸-压缩循环后粘结性的测定 GB/T 13477.12-2002 12. 冷拉-热压后粘结性 建筑密封材料试验方法 第13部分:冷拉-热压后粘结性的测定GB/T13477.13-2002 13. 浸水及拉伸-压缩循环后粘结性的测定 建筑密封材料试验方法 第14部分:浸水及拉伸-压缩循环后粘结性的测定 GB/T 13477.14-2002 14. 弹性恢复率 建筑密封材料试验方法 第17部分:弹性恢复率的测定GB/T13477.17-2002 15. 剥离粘结性 建筑密封材料试验方法 第18部分:剥离粘结性的测定 GB/T 13477.18-2002 16. 质量与体积变化 建筑密封材料试验方法 第19部分:质量与体积变化的测定 GB/T 13477.19-2002 17. 污染性 建筑密封材料试验方法 第20部分:污染性的测定GB/T 13477.20-2002 1 嵌缝密封材料 18. 紫外线处理 223 石材用建筑密封胶 GB/T 23261-2009 彩色涂层钢板用建筑密封胶 JC/T 884-2001 19. 邵氏硬度 硫化橡胶或热塑性橡胶 压入硬度试验方法 第1部分:邵氏硬度计法(邵尔硬度) GB/T 531.1-2008 2 止水带/止水条 1. 邵氏硬度 0223 硫化橡胶或热塑性橡胶 压入硬度试验方法 第1部分:邵氏硬度计法(邵尔硬度) GB/T 531.1-2008 2. 拉伸强度 硫化橡胶或热塑性橡胶拉伸应力应变性能的测定 GB/T528-2009 3. 扯断伸长率 4. 撕裂强度 硫化橡胶或热塑性橡胶撕裂强度的测定(裤形、直角形和新月形试样) GB/T529-2008 5. 压缩永久变形 硫化橡胶、热塑性橡胶 常温、高温和低温下压缩永久变形测定 GB/T7759-1996 6. 热空气老化 硫化橡胶或热塑性橡胶 热空气加速老化和耐热试验 GB/T3512-2001 7. 橡胶与金属粘接 高分子防水材料 第二部分 止水带 GB 18173.2-2000 8. 密度 硫化橡胶或热塑性橡胶 密度的测定 GB/T 533-2008 2 止水带/止水条 9. 外观 223 膨润土橡胶遇水膨胀止水条 JG/T141-2001 10. 尺寸 11. 抗水压力 12. 膨胀倍率 13. 耐热性 14. 低温试验 15. 耐水性 九 胶粘剂 1 胶粘剂 1. 晾置时间 0223 陶瓷墙地砖胶粘剂 JC/T547-2005 2. 耐水粘结性 3. 耐温粘结性 4. 冻融性 5. 拉伸强度(标准条件、浸水、热老化、冻融循环) 1 胶粘剂 6. 固体含量/不挥发物含量 223 胶粘剂不挥发物含量的测定 GB/T2793-1995 建筑胶粘剂试验方法 第1部分: 陶瓷砖胶粘剂试验方法 GB/T 12954.1-2008 7. 拉伸强度 树脂浇铸体性能试验方法 GB/T 2567-2008 8. 弹性模量 (弯曲、拉伸) 9. 伸长率 10. 适用期 建筑胶粘剂试验方法 第1部分: 陶瓷砖胶粘剂试验方法 GB/T 12954.1-2008 11. 拉伸剪切强度 胶粘剂 拉伸剪切强度的测定(刚性材料对刚性材料) GB/T 7124-2008 碳纤维片材加固混凝土结构技术规程 CECS 146:2003(2007) 混凝土结构加固设计规范GB50367-2006 12. 正拉粘结强度 胶粘剂对接接头拉伸强度的测定 GB/T 6329-1996 建筑工程饰面砖粘结强度检验标准JGJ110-2008 碳纤维片材加固混凝土结构技术规程 CECS 146:2003(2007) 混凝土结构加固设计规范GB50367-2006 1 胶粘剂 13. 压缩强度 223 碳纤维片材加固混凝土结构技术规程 CECS 146:2003(2007) 纤维片材加固修复结构用粘结树脂JG/T166-2004 树脂浇铸体性能试验方法 GB/T 2567-2008 14. 弯曲强度 碳纤维片材加固混凝土结构技术规程 CECS 146:2003(2007) 纤维片材加固修复结构用粘结树脂JG/T166-2004 树脂浇铸体性能试验方法 GB/T 2567-2008 混凝土结构加固设计规范 GB50367-2006 15. 凝胶时间 纤维片材加固修复结构用粘结树脂JG/T166-2004 环氧树脂凝胶时间测定方法 GB/T12007.7-1989 16. 热变形温度 塑料负荷变形温度的测定 通用试验方法 GB/T 1634.1-2004 17. 对接接头拉伸强度 胶粘剂对接接头拉伸强度的测定 GB/T 6329-1996 18. 劈裂抗拉强度 混凝土结构加固设计规范GB50367-2006 19. 粘度 胶粘剂粘度的测定 GB/T 2794-1995 仅用旋转粘度计法 20. 密度 液态胶粘剂密度测定方法 重量杯法 GB/T 13354-1992 十 管网材料 1 给、排水管材 1. 外观 0315 建筑排水用硬聚氯乙烯(PVC-U)管材GB/T5836.1-2006 给水用硬聚氯乙烯(PVC-U)管材GB/T10002.1-2006 给水用聚乙烯(PE)管材 GB/T13663-2000 排水用芯层发泡硬聚氯乙烯(PVC-U)管材GB/T 16800-2008 埋地排水用硬聚氯乙烯(PVC-U)结构壁管道系统 第1部分:双壁波纹管材 GB/T 18477.1-2007 冷热水用聚丙烯管道系统第2部分:管材 GB/T 18742.2-2002 埋地用聚乙烯(PE)结构壁管道系统 第1部分:聚乙烯双壁波纹管材 GB/T19472.1-2004 埋地用聚乙烯(PE)结构壁管道系统 第2部分:聚乙烯缠绕结构壁管材 GB/T 19472.2-2004 无压埋地排污、排水用硬聚氯乙烯(PVC-U)管材 GB/T20221-2006 玻璃纤维增塑料夹砂管 GB/T 21238-2007 给水用孔网钢带聚乙烯复合管 CJ/T181-2003 钢丝网骨架塑料(聚乙烯)复合管材及管件 CJ/T 189-2007 1 给、排水管材 2. 尺寸 0315 塑料管道系统 塑料部件尺寸的测定 GB/T 8806-2008 玻璃纤维增塑料夹砂管 GB/T 21238-2007 3. 拉伸强度 热塑性塑料管材 拉伸性能测定 第2部分:硬聚氯乙烯(PVC-U)、氯化聚氯乙烯(PVC-C)和高抗冲 聚氯乙烯(PVC-HI)管材 GB/T8804.2-2003 4. 断裂伸长率 热塑性塑料管材 拉伸性能测定 第3部分:聚烯烃管材 GB/T 8804.3-2003 5. 纵向回缩率 热塑性塑料管材纵向回缩率的测定GB/T6671-2001 6. 落锤冲击试验/冲击强度 热塑性塑料管材耐外冲击性能试验方法 时针旋转法 GB/T14152-2001 PE结构壁管材和PE双壁波纹管材不测公称直径DN500的管材,其他管材只测外径≤400mm的管材 1 给、排水管材 7. 维卡软化温度 315 热塑性塑料管材、管件 维卡软化温度的测定 GB/T8802-2001 8. 不透光性 给水用硬聚氯乙烯(PVC-U)管材GB/T10002.1-2006 冷热水用聚丙烯管道系统第2部分:管材 GB/T 18742.2-2002 9. 密度 塑料 非泡沫塑料密度的测定 第1部分:浸渍法、液体比重瓶法和滴定法 GB/T 1033.1-2008 10. 液压试验 流体输送用热塑性塑料管材耐内压试验方法 GB/T6111-2003 11. 弯曲度 硬质塑料管材弯曲度测量方法 QB/T 2803-2006 12. 环刚度 热塑性塑料管材环刚度的测定 GB/T 9647-2003 排水用芯层发泡硬聚氯乙烯(PVC-U)管材GB/T 16800-2008 埋地用聚乙烯(PE)结构壁管道系统 第2部分:聚乙烯缠绕结构壁管材 GB/T 19472.2-2004 玻璃纤维增塑料夹砂管 GB/T 21238-2007 只测外径≤1000mm的管材 1 给、排水管材 13. 环柔度/环柔性 0315 热塑性塑料管材环刚度的测定 GB/T 9647-2003 埋地排水用硬聚氯乙烯结构壁管道系统 第1部分:双壁波纹管材 GB/T 18477.1-2007 埋地用聚乙烯(PE)结构壁管道系统第1部分:聚乙烯双壁波纹管材 GB/T19472.1-2004 埋地用聚乙烯(PE)结构壁管道系统 第2部分:聚乙烯缠绕结构壁管材 GB/T 19472.2-2004 只测外径≤1000mm的管材 14. 爆破试验/爆破强度试验 流体输送塑料管材液压瞬时爆破和耐压试验方法 GB/T 15560-1995 15. 受压开裂稳定性 钢丝网骨架塑料(聚乙烯)复合管材及管件 CJ/T 189-2007 16. 烘箱试验 埋地排水用硬聚氯乙烯结构壁管道系统 第1部分:双壁波纹管材 GB/T19472.1-2004 埋地用聚乙烯(PE)结构壁管道系统第1部分:聚乙烯双壁波纹管材 GB/T 19472.2-2004 构壁管道系统 第1部分:双壁波纹管材 GB/T 18477.1-2007 1 给、排水管材 17. 扁平试验/压扁性能 315 排水用芯层发泡硬聚氯乙烯(PVC-U)管材GB/T 16800-2008 给水用孔网钢带聚乙烯复合管理 CJ/T181-2003 给水涂塑复合钢管CJ/T 120-2008 给水衬塑复合钢管 CJ/T136-2007 18. 简支梁冲击试验 流体输送用热塑性塑料管材简支梁冲击试验方法 GB/T18743-2002 19. 附着力试验 给水涂塑复合钢管 CJ/T 120-2008 20. 结合强度试验 给水衬塑复合钢管 CJ/T136-2007 2 给、排水管件 1 外观 0315 建筑排水用硬聚氯乙烯(PVC-U)管件 GB/T 5836.2-2006 给水用硬聚氯乙烯管件GB/T10002.2-2003 冷热水用聚丙烯管道系统 第3部分:管件 GB/T18742.3-2002 2 给、排水管件 2 尺寸 0315 3 维卡软化温度 硬聚氯乙烯管材及管件维卡软化温度测定方法GB/T8802-2001 2 给、排水管件 4 烘箱试验 315 注射成型硬质聚氯乙烯(PVC-U)、氯化聚氯乙烯(PVC-C)、丙烯腈-丁二烯-苯乙烯三元共聚物(ABS)和丙烯腈-苯乙烯-丙烯酸盐三元共聚物(ASA)管件 热烘箱试验方法GB/T8803-2001 5 坠落试验 硬聚氯乙烯(PVC-U)管件坠落试验方法GB/T8801-2007 6 密度 塑料 非泡沫塑料密度的测定 第1部分:浸渍法、液体比重瓶法和滴定法 GB/T 1033.1-2008 7 液压试验 给水用硬聚氯乙烯管件GB/T10002.2-2003 冷热水用聚丙烯管道系统 第3部分:管件 GB/T18742.3-2002 8 不透光性 冷热水用聚丙烯管道系统 第3部分:管件 GB/T18742.3-2002 3 住宅厨房、卫生间排气道 1 外观 0323 住宅厨房、卫生间排气道 JG/T 194-2006 2 尺寸 3 承载力试验 4 玻璃纤维增强水泥通风管道 1 外观 315.21 玻璃纤维增强水泥排气管道 JC/T 854-2008 4 玻璃纤维增强水泥通风管道 2 尺寸 315.21 玻璃纤维增强水泥排气管道 JC/T 854-2008 3 密度 4 吸水性 5 冲击性能 6 承载力试验 7 抗弯强度 5 低压流体输送用镀锌焊接钢管 1 拉伸强度 0339 金属材料 拉伸试验 第1部分:室温试验方法 GB/T228.1-2010 2 压扁试验 金属管 压扁试验方法 GB/T246-2007 3 弯曲试验 金属管 弯曲试验方法 GB/T244-2008 4 镀锌层重量 低压流体输送用镀锌焊接钢管 GB/T3091-2008 5 镀锌层均匀性 6 黑管壁厚 7 尺寸 6 普通碳素钢电线套管 1 弯曲 0339 金属管 弯曲试验方法GB/T244-2008 6 普通碳素钢电线套管 2 锌层均匀性 339 碳素结构钢电线套管 YB/T 5305-2008 3 锌层质量 4 尺寸 电气安装用导管 特殊要求—金属导管 GB/T 14823.1-1993 5 抗压 7 建筑用绝缘电工套管 1 外观 0315 建筑用绝缘电工套管 JG 3050-1998 2 尺寸 3 抗压性能 4 冲击性能 5 弯曲性能 6 弯扁性 7 跌落性能 8 耐热性能 9 自熄时间 10 氧指数 11 电气性能 8 穿线管材 1 外观 0315 埋地通讯用多孔一体塑料管材 第一部分PVC-U多孔一体管材 QB/T 2667.1-2004 埋地式高压电力电缆用氯化聚氯乙烯(PVC-C)套管 QB/T 2479-2005 地下通信管道用塑料管 第1部分:总则 YD/T 841.1-2008 电力电缆用导管技术条件 第1部分:总则 DL/T 802.1-2007 2 尺寸 3 弯曲度 硬质塑料管材弯曲度测量方法 QB/T 2803-2006 4 拉伸强度 热塑性塑料管材 拉伸性能测定 第2部分:硬聚氯乙烯(PVC-U)、氯化聚氯乙烯(PVC-C)和高抗冲 聚氯乙烯(PVC-HI)管材 GB/T8804.2-2003 塑性塑料管材 拉伸性能测定 第3部分:聚烯烃管材 GB/T 8804.3-2003 玻璃纤维增强塑料拉伸性能试验方法 GB/T 1447-2005 5 断裂伸长率 热塑性塑料管材 拉伸性能测定 第3部分:聚烯烃管材 GB/T 8804.3-2003 6 纵向回缩率 热塑性塑料管材纵向回缩率的测定GB/T6671-2001 8 穿线管材 7 维卡软化温度 315 硬聚氯乙烯管材及管件维卡软化温度测定方法 GB/T8802-2001 8 落锤冲击试验 埋地通讯用多孔一体塑料管材 第一部分PVC-U多孔一体管材 QB/T 2667.1-2004 地下通信管道用塑料管 第2部分:实壁管 YD/T 841.2-2008 地下通信管道用塑料管 第3部分: 双壁波纹管 YD/T 841.3-2008 地下通信管道用塑料管 第5部分:梅花管 YD/T 841.5-2008 埋地式高压电力电缆用氯化聚氯乙烯(PVC-C)套管 QB/T 2479-2005 9 耐外负荷性 埋地通讯用多孔一体塑料管材 第一部分PVC-U多孔一体管材 QB/T 2667.1-2004 10 环段热压缩力 埋地式高压电力电缆用氯化聚氯乙烯(PVC-C)套管 QB/T 2479-2005 11 弯曲强度 玻璃纤维增强塑料弯曲性能试验方法 GB/T 1449-2005 12 管刚度/环刚度 电力电缆用导管技术条件 第2部分:玻璃纤维增强塑料电缆导管 DL/T 802.2-2007 地下通信管道用塑料管 第1部分:总则 YD/T 841.1-2008 8 穿线管材 13 负荷变形温度 315 塑料负荷变形温度的测定 塑料、硬橡胶和长纤维增强复合材料 GB/T 1634.2-2004 14 扁平试验 地下通信管道用塑料管 第1部分:总则 YD/T 841.1-2008 15 坠落试验 地下通信管道用塑料管 第1部分:总则 YD/T 841.1-2008 9 金属管材 1 液压试验 0315 金属管 液压试验方法 GB/T 241-2007 10 建筑装饰用不锈钢焊接管材 1 拉伸 0301 建筑装饰用不锈钢焊接管材 JG/T 3030-1995 2 压扁 3 冷弯 4 壁厚 11 钢管 1 屈服强度 0301 金属材料 拉伸试验 第1部分:室温试验方法 GB/T228.1-2010 2 抗拉强度 3 弯曲试验 金属管弯曲试验方法GB/T244-2008 4 压扁试验 金属管压扁试验方法GB/T246-2007 12 井盖 1 外观 0301 钢纤维混凝土检查井盖JC889-2001 铸铁检查井盖CJ/T3012-1993 玻璃纤维增强塑料复合检查井盖JC/T1009-2006 检查井盖 GB/T 23858-2009 2 几何尺寸及允许偏差 3 承载能力 十一 保温吸声材料 1 建筑保温砂浆及保温系统 1 外观 1016 建筑保温砂浆 GB/T 20473-2006 2 干密度 3 放射性 建筑材料放射性核素限量 GB6566-2010 4 抗压强度 无机硬质绝热制品试验方法 GB/T 5486-2008 胶粉聚苯颗粒外墙外保温系统 JG158-2004 5 抗冻性能 建筑保温砂浆 GB/T 20473-2006 6 软化系数 建筑保温砂浆 GB/T 20473-2006 胶粉聚苯颗粒外墙外保温系统JG158-2004 1 建筑保温砂浆及保温系统 7 导热系数 1016 绝热材料稳态热阻及有关特性的测定 防护热板法 GB/T 10294-2008 绝热材料稳态热阻及有关特性的测定 热流计法 GB/T 10295-2008 建筑保温砂浆 GB/T 20473-2006 8 线(性)收缩率 建筑砂浆基本性能试验方法标准 JGJ/T 70-2009 胶粉聚苯颗粒外墙外保温系统 JG158-2004 9 压剪粘接强度 胶粉聚苯颗粒外墙外保温系统 JG158-2004 10 耐水压剪粘结强度 11 耐冻融压剪粘结强度 12 耐温压剪粘结强度 13 可使用(操作)时间 胶粉聚苯颗粒外墙外保温系统 JG158-2004 膨胀聚苯板薄抹灰外墙外保温系统JG149-2003 14 拉伸粘结强度 15 浸水后拉伸粘结强度 16 压折比 水泥胶砂强度检验方法(IS0法) GB/T17671-1999 胶粉聚苯颗粒外墙外保温系统 JG158-2004 1 建筑保温砂浆及保温系统 17 断裂伸长率 1016 建筑防水涂料试验方法 GB/T16777-2008 胶粉聚苯颗粒外墙外保温系统 JG158-2004 18 不挥发物含量 19 贮存稳定性 20 容器中状态 21 施工性 22 干燥时间 23 打磨性 24 耐水性 25 耐碱性 26 柔韧性 27 低温贮存稳定性 28 透水性 2 保温板材 1 尺寸稳定性/尺寸变化率 1016 硬质泡沫塑料尺寸稳定性试验方法 GB/T8811-2008 泡沫塑料和橡胶 线性尺寸测定 GB/T6342-1996 柔性泡沫橡塑绝热制品 GB/T 17794-2008 绝热用模塑聚苯乙烯泡沫塑料 GB/T 10801.1-2002 绝热用挤塑聚苯乙烯泡沫塑料 GB/T 10801.2-2002(XPS) 喷涂硬聚氨酯泡沫塑料 GB/T 20219-2006 膨胀聚苯板薄抹灰外墙外保温系统JG149-2003 2 外观 柔性泡沫橡塑绝热制品 GB/T 17794-2008 绝热用模塑聚苯乙烯泡沫塑料 GB/T 10801.1-2002 绝热用挤塑聚苯乙烯泡沫塑料 GB/T 10801.2-2002(XPS) 3 密度 泡沫塑料及橡胶 表观密度的测定GB/T6343-2009 柔性泡沫橡塑绝热制品 GB/T 17794-2008 绝热用模塑聚苯乙烯泡沫塑料 GB/T 10801.1-2002 膨胀聚苯板薄抹灰外墙外保温系统JG149-2003 2 保温板材 4 吸水率 1016 硬质泡沫塑料吸水率的测定 GB/T8810-2005 绝热用模塑聚苯乙烯泡沫塑料 GB/T 10801.1-2002 绝热用挤塑聚苯乙烯泡沫塑料 GB/T 10801.2-2002(XPS) 喷涂聚氨酯硬泡体保温材料 JC/T998-2006 5 真空吸水率 柔性泡沫橡塑绝热制品 GB/T 17794-2008 6 氧指数 塑料 用氧指数法测定燃烧行为 第2部分:室温试验 GB/T 2406.2-2009 绝热用模塑聚苯乙烯泡沫塑料 GB/T 10801.1-2002 喷涂聚氨酯硬泡体保温材料 JC/T998-2006 7 燃烧分级(B2级) 建筑材料可燃性试验方法 GB 8626-2007 建筑材料及制品燃烧性能分级 GB8624-2006 绝热用模塑聚苯乙烯泡沫塑料 GB/T 10801.1-2002 绝热用挤塑聚苯乙烯泡沫塑料 GB/T 10801.2-2002(XPS) 2 保温板材 8 导热系数 1016 绝热材料稳态热阻及有关特性的测定 防护热板法 GB/T 10294-2008 绝热材料稳态热阻及有关特性的测定 热流计法 GB/T 10295-2008 塑料导热系数试验方法 护热平板法 GB/T 3399-1982 绝热用模塑聚苯乙烯泡沫塑料 GB/T 10801.1-2002 绝热用挤塑聚苯乙烯泡沫塑料 GB/T 10801.2-2002(XPS) 喷涂聚氨酯硬泡体保温材料JC/T998-2006 喷涂硬聚氨酯泡沫塑料 GB/T 20219-2006 膨胀聚苯板薄抹灰外墙外保温系统JG149-2003 柔性泡沫橡塑绝热制品 GB/T 17794-2008 9 抗压强度/压缩强度 硬质泡沫塑料压缩强度试验方法 GB/T 8813-2008 绝热用模塑聚苯乙烯泡沫塑料 GB/T 10801.1-2002 绝热用挤塑聚苯乙烯泡沫塑料 GB/T 10801.2-2002(XPS) 喷涂硬聚氨酯泡沫塑料 GB/T 20219-2006 10 抗渗性 喷涂聚氨酯硬泡体保温材料JC/T998-2006 2 保温板材 11 垂直于板面方向的抗拉强度 1016 膨胀聚苯板薄抹灰外墙外保温系统JG149-2003 3 无机硬质绝热制品 1 尺寸 1006 无机硬质绝热制品试验方法 GB/T 5486-2008 2 外观 3 抗压强度 4 抗折强度 5 含水率 6 密度/体积密度 无机硬质绝热制品试验方法 GB/T 5486-2008 泡沫玻璃绝热制品JC/T 647-2005 7 导热系数 绝热材料稳态热阻及有关特性 的测定 防护热板法 GB/T 10294-2008 绝热材料稳态热阻及有关特性的测定 热流计法 GB/T 10295-2008 8 吸水率 泡沫玻璃绝热制品JC/T 647-2005 无机硬质绝热制品试验方法 GB/T 5486-2008 4 矿物棉/玻璃棉 1 压缩强度 1006 矿物棉制品压缩性能试验方法 GB/T 13480-1992 建筑用岩棉、矿渣棉绝热制品 GB/T 19686-2005 2 吸水率 矿物棉及其制品试验方法 GB/T 5480-2008 4 矿物棉/玻璃棉 3 表观密度/密度 1006 矿物棉及其制品试验方法 GB/T 5480-2008 4 导热系数/热阻 绝热材料稳态热阻及有关特性的测定 防护热板法 GB/T 10294-2008 绝热材料稳态热阻及有关特性的测定 热流计法GB/T 10295-2008 5 垂直于板面方向的抗拉强度 建筑外墙外保温用岩棉制品 GB/T 25975-2010 6 质量吸湿率 矿物棉及其制品试验方法 GB/T 5480-2008 5 玻璃纤维网格布 1 单位面积质量 1006 增强制品试验方法 第3部分: 单位面积质量的测定 GB/T 9914.3-2001 2 断裂强力 增强材料 机织物试验方法 第5部分: 玻璃纤维拉伸断裂强力和断裂伸长的测定 GB/T 7689.5-2001 3 耐碱强力保留率(耐碱性) 增强材料 机织物试验方法 第5部分: 玻璃纤维拉伸断裂强力和断裂伸长的测定 GB/T 7689.5-2001 玻璃纤维网布耐碱性试验方法 氢氧化钠溶液浸泡法 GB/T 20102-2006 膨胀聚苯板薄抹灰外墙外保温系统 JG 149-2003 5 玻璃纤维网格布 4 断裂伸长率 1006 增强材料 机织物试验方法 第5部分: 玻璃纤维拉伸断裂强力和断裂伸长的测定 GB/T 7689.5-2001 5 涂塑量(可燃物含量) 增强制品试验方法 第2部分: 玻璃纤维可燃物含量的测定 GB/T 9914.2-2001 十二 道桥材料 1 沥青及沥青混合料 1 沥青针入度 1001 公路工程沥青及沥青混合料试验规程JTJ052-2000 2 沥青延度 3 沥青软化点 4 沥青与粗集料的粘附性(水煮法) 5 密度试验(表干/水中/蜡封/体积法) 6 马歇尔稳定度试验 7 沥青路面芯样马歇尔试验 8 沥青含量试验(离心分离法) 1 沥青及沥青混合料 9 矿料级配检验 1001 公路工程集料试验规程 JTG E42—2005 10 配合比设计 公路沥青路面施工技术规范 JTG F40-2004 十三 道路工程 1 路基路面 1 承载能力(弯沉试验) 1001 公路路基路面现场测试规程 JTG E60-2008 只做贝克曼梁法 2 抗滑性能 只做摆式仪法、手工铺砂法 3 厚度 只做挖坑及钻芯法 4 压实度 十四 玻璃 1 中空玻璃 1 露点 中空玻璃GB/T 11944-2002 十五 电气材料 1 电线电缆 1 导体直流电阻 0424 电线电缆电性能试验方法 第4部分:导体直流电阻试验 GB/T 3048.4-2007 2 绝缘电阻试验 电线电缆电性能试验方法 第5部分:绝缘电阻试验 GB/T 3048.5-2007 3 交流电压试验 电线电缆电性能试验方法 第8部分:交流电压试验 GB/T 3048.8-2007 ≤15kV 1 电线电缆 4 绝缘厚度 424 电缆和光缆绝缘和护套材料通用试验方法 第11部分:通用试验方法 厚度和外形尺寸测量 机械性能试验 GB/T 2951.11-2008 5 尺寸 6 机械性能 1 电线电缆 7 热老化 0424 电缆和光缆绝缘和护套材料通用试验方法 第12部分:通用试验方法 热老化试验方法 GB/T 2951.12-2008 8 密度 电缆和光缆绝缘和护套材料通用试验方法 第13部分: 通用试验方法 密度测定方法 吸水试验 收缩试验 GB/T 2951.13-2008 9 收缩试验 10 低温试验 电缆和光缆绝缘和护套材料通用试验方法 第14部分:通用试验方法 低温试验 GB/T 2951.14-2008 11 高温压力试验 电缆和光缆绝缘和护套材料通用试验方法 第31部分:聚氯乙烯混合料专用试验方法 高温压力试验-抗开裂试验 GB/T 2951.31-2008 1 电线电缆 12 单根燃烧试验 424 电缆和光缆在火焰条件下的燃烧试验 第11部分:单根绝缘电线电缆火焰垂直蔓延试验 试验装置 GB/T 18380.11-2008 电缆和光缆在火焰条件下的燃烧试验 第12部分:单根绝缘电线电缆火焰垂直蔓延试验 1kW预混合型火焰试验方法 GB/T18380.12-2008 电缆和光缆在火焰条件下的燃烧试验 第21部分:单根绝缘细电线电缆火焰垂直蔓延试验 试验装置 GB/T 18380.21-2008 电缆和光缆在火焰条件下的燃烧试验 第22部分:单根绝缘细电线电缆火焰垂直蔓延试验 扩散型火焰试验方法 GB/T 18380.22-2008 十六 电气工程 1 电能质量 1 供电电压允许偏差 0425 电能质量 供电电压偏差 GB/T12325-2008 建筑节能工程施工质量验收规范GB50411-2007 建筑节能工程施工验收规范 SZJG 31-2010 电压1000V以下,电流1000A以下. 1 电能质量 2 公共电网谐波电压 425 电能质量 电压波动和闪变 GB12326-2008 建筑节能工程施工质量验收规范GB50411-2007 建筑节能工程施工验收规范 SZJG 31-2010 3 公共电网谐波电流 电能质量 公共电网谐波 GB/T14549-1993 建筑节能工程施工质量验收规范GB50411-2007 建筑节能工程施工验收规范 SZJG 31-2010 4 三相电压不平衡度 电能质量 三相电压不平衡度 GB/T 15543-2008 建筑节能工程施工质量验收规范GB50411-2007 建筑节能工程施工验收规范 SZJG 31-2010 5 三相照明配电干线相负荷平衡率 建筑节能工程施工质量验收规范GB50411-2007 建筑节能工程施工验收规范 SZJG 31-2010 2 企业供配系统节能监测 1 供电电压偏差 0425 评价企业合理用电技术导则 GB/T3485-1998 企业供配系统节能监测方法 GB/T16664-1996 2 日负荷率 3 功率因数 2 企业供配系统节能监测 4 谐波 425 评价企业合理用电技术导则 GB/T3485-1998 企业供配系统节能监测方法 GB/T16664-1996 5 变压器负载系数 3 三相异步电动机经济运行 1 输入有功功率 0425 三相异步电动机经济运行 GB/T 12497-2006 2 输入无功功率 3 功率因数 4 输入电压 5 输入电流 4 建筑与建筑群综合布线系统 1 链路长度 0419 综合布线系统工程验收规范 GB 50312-2007 2 接线图 3 衰减 4 近端串扰 十七 地基与基础工程 1 基桩 1 基桩承载力静载荷试验 1017 建筑基桩检测技术规范 JGJ 106-2003 建筑地基基础设计规范 GB 50007-2002 建筑地基基础检测规范 DBJ 15-60-2008 建筑基桩检测规程 SJG 09-2007 建筑桩基技术规范 JGJ 94-2008 2 桩身完整性超声波检测 建筑基桩检测技术规范 JGJ 106-2003 建筑地基基础设计规范 GB 50007-2002 建筑地基基础检测规范DBJ15-60-2008 建筑基桩检测规程 SJG 09-2007 建筑桩基技术规范 JGJ 94-2008 超声波检测混凝土缺陷技术规程 CECS 21:2000 3 桩身完整性低应变动力检测 建筑基桩检测技术规范 JGJ 106-2003 建筑地基基础设计规范 GB 50007-2002 建筑桩基技术规范 JGJ 94-2008 建筑基桩检测规程SJG 09-2007 建筑地基基础检测规范 DBJ 15-60-2008 4 桩身完整性高应变动力检测 5 基桩承载力高应变动力检测 6 钻芯检测 1 基桩 7 桩内力 1017 建筑地基基础设计规范 GB 50007-2002 建筑基坑支护技术规程 JGJ 120-1999 建筑基坑工程监测技术规范 GB 50497-2009 深圳市基坑支护技术规范 SJG05-2011 深圳市地基基础勘察设计规范 SJG 01-2010 2 地基 1 地基承载力静荷载试验 1017 建筑地基基础设计规范 GB 50007-2002 建筑地基基础检测规范DBJ15-60-2008 岩土工程勘察规范 GB 50021-2001(2009) 深圳市地基基础勘察设计规范 SJG 01-2010 2 地基 2 复合地基承载力静荷载试验 1017 建筑地基处理技术规范 JGJ 79-2002 建筑地基基础设计规范 GB 50007-2002 建筑地基基础检测规范DBJ15-60-2008 深圳地区地基处理技术规范 SJG 04-1996 岩土工程勘察规范 GB 50021-2001(2009) 深圳市地基基础勘察设计规范 SJG01-2010 3 地基土承载力(标准贯入试验) 岩土工程勘察规范 GB 50021-2001(2009) 建筑地基基础检测规范 DBJ15-60-2008 深圳市地基基础勘察设计规范 SJG 01-2010 2 地基 4 岩基承载力(岩基载荷试验) 1017 建筑地基基础设计规范 GB 50007-2002 5 地基承载力(圆锥动力触探试验) 岩土工程勘察规范 GB 50021-2001(2009) 建筑地基基础检测规范 DBJ15-60-2008 深圳市地基基础勘察设计规范 SJG 01-2010 圆锥动力触探试验规程 YS 5219-2000 6 锚杆(土钉)抗拔承载力试验 建筑基坑支护技术规程 JGJ 120-1999 深圳市基坑支护技术规范 SJG05-2011 建筑边坡工程技术规范 GB50330-2002 锚杆喷射混凝土支护技术规范 GB 50086-2001 建筑地基基础设计规范 GB 50007-2002 深圳市地基基础勘察设计规范 SJG01-2010 3 建筑边坡 1 水平位移 1017 建筑边坡工程技术规范GB50330-2002 工程测量规范GB 50026-2007 深圳市地基基础勘察设计规范 SJG 01-2010 2 垂直位移 3 地表裂缝 4 喷射混凝土质量 4 建筑基坑 1 水平位移 1017 建筑地基基础设计规范 GB 50007-2002 建筑基坑工程监测技术规范GB50497-2009 建筑基坑支护技术规程JGJ120-1999 深圳市基坑支护技术规范 SJG05-2011 工程测量规范 GB 50026-2007 深圳市地基基础勘察设计规范 SJG 01-2010 2 垂直位移 3 地下水位 建筑地基基础设计规范 GB 50007-2002 建筑基坑工程监测技术规范GB50497-2009 建筑基坑支护技术规程 JGJ 120-1999 深圳市基坑支护技术规范 SJG05-2011 工程测量规范 GB 50026-2007 深圳市地基基础勘察设计规范 SJG 01-2010 4 基坑底隆起 建筑地基基础设计规范 GB 50007-2002 建筑基坑支护技术规程 JGJ 120-1999 建筑基坑工程监测技术规范 GB 50497-2009 深圳市基坑支护技术规范 SJG05-2011 工程测量规范 GB 50026-2007 深圳市地基基础勘察设计规范 SJG 01-2010 4 建筑基坑 5 土层孔隙水压力 1017 建筑地基基础设计规范 GB 50007-2002 建筑基坑工程监测技术规范 GB 50497-2009 建筑基坑支护技术规程 JGJ 120-1999 深圳市基坑支护技术规范 SJG05-2011 深圳市地基基础勘察设计规范 SJG 01-2010 6 土体分层竖向位移 7 支护结构内力 8 土压力监测 9 地表裂缝 建筑基坑工程监测技术规范 GB 50497-2009 深圳市地基基础勘察设计规范 SJG 01-2010 工程测量规范 GB 50026-2007 10 周边建筑裂缝 11 喷射混凝土质量 建筑基坑支护技术规程 JGJ 120-1999 深圳市基坑支护技术规范 SJG05-2011 锚杆喷射混凝土支护技术 GB50086-2001 深圳市地基基础勘察设计规范 SJG 01-2010 5 锚杆内力测试 1 锚杆锁定力 1017 深圳市基坑支护技术规范 SJG05-2011 锚杆喷射混凝土支护技术 GB50086-2001 岩土锚杆(索)技术规程 CECS 22:2005 建筑边坡工程技术规范 GB 50330-2002 建筑基坑支护技术规程 JGJ 120-1999 建筑地基基础设计规范 GB 50007-2002 深圳市地基基础勘察设计规范 SJG 01-2010 2 锚杆内力监测 6 土工试验 1 含水率 1008.07 土工试验方法 GB/T 50123-1999 公路土工试验规程 JTJ E40-2007 只测:烘箱干燥法、酒精燃烧法 2 密度 只测:环刀法 3 击实试验 十八 主体结构工程 1 混凝土结构 1 混凝土强度 1017 超声回弹综合法检测混凝土强度技术规程 CECS 02:2005 回弹法检测混凝土抗压强度技术规程 JGJ/T23-2011 钻芯法检测混凝土强度技术规程CECS03:2007 建筑结构检测技术标准 GB/T 50344-2004 只测:回弹法、超声回弹综合法、钻芯法/ 1 混凝土结构 2 保护层厚度 1017 混凝土中钢筋检测技术规程 JGJ/T 152-2008 混凝土结构工程施工质量验收规范 GB 50204-2002(2011) 3 混凝土缺陷 超声法检测混凝土缺陷技术规程CECS21:2000 只测:裂缝深度、不密实区和空洞、混凝土结合面质量、表面损伤层 4 钢筋数量、钢筋直径、钢筋间距 混凝土中钢筋检测技术规程 JGJ/T 152-2008 5 结构/构件承载力 混凝土结构试验方法标准GB50152-92 6 尺寸与偏差 建筑结构检测技术标准 GB/T 50344-2004 混凝土结构工程施工质量验收规范GB 50204-2002(2011) 2 砌体结构 1 砖抗压强度 1012 回弹仪评定烧结普通砖强度等级的方法 JC/T 796-1999 2 砌筑砂浆抗压强度 贯入法检测砌筑砂浆抗压强度技术规程 JGJ/T136-2001 砌体工程现场检测技术标准 GB/T 50315-2000 只测:回弹法 3 砌体抗压强度 砌体工程现场检测技术标准 GB/T 50315-2000 只测:原位轴压法 2 砌体结构 4 尺寸与偏差 1012 建筑结构检测技术标准 GB/T 50344-2004 砌体结构工程施工质量验收规范 GB/T 50203-2011 3 后置埋件 1 锚固抗拔承载力 1017 建筑锚栓抗拉拔、抗剪性能试验方法 DG/TJ08-003-2000 混凝土后锚固件抗拔和抗剪性能检测技术规程 DBJ/T 15-35-2004 混凝土结构后锚固技术规程 JGJ145-2004 混凝土结构加固设计规范 GB50367-2006附录N 4 饰面砖 1 粘结强度 1017 建筑工程饰面砖粘结强度检验标准JGJ110-2008 5 碳纤维片材 1 粘结强度 1017 碳纤维片材加固混凝土结构技术 规程CECS 146:2003(2007) 十九 钢结构 1 钢结构 1 射线法(RT) 1101 金属熔化焊焊接接头射线照相 GB/T 3323-2005 钢结构工程质量施工验收规范 GB 50205-2001 2 超声法(UT) 钢焊缝手工超声波探伤方法和探伤结果分级 GB/T 11345-1989 钢结构超声波探伤及质量分级法JG/T203-2007 钢结构现场检测技术标准 GB/T50621-2010 1 钢结构 3 磁粉法(MT) 1101 无损检测 焊缝磁粉检测 JB/T 6061-2007 铸钢件磁粉检测 GB/T 9444-2007 钢结构现场检测技术标准 GB/T50621-2010 4 渗透法(PT) 钢锻件液体渗透检验方法 JB/T8466-1996 铸钢件渗透检测 GB/T 9443-2007 无损检测 焊缝渗透检测 JB/T 6062-2007 钢结构现场检测技术标准 GB/T50621-2010 5 构件厚度 无损检测 接触式超声脉冲回波法测厚方法 GB/T 11344-2008 钢结构现场检测技术标准 GB/T50621-2010 6 钢结构防腐涂料涂层厚度 磁性基体上非磁性覆盖层 覆盖层厚度测量 磁性法GB/T 4956-2003 7 钢结构防火涂料涂层厚度 磁性基体上非磁性覆盖层 覆盖层厚度测量 磁性法GB/T 4956-2003 钢结构工程施工质量验收规范 GB50205-2001 8 焊缝外观 钢结构工程施工质量验收规范 GB 50205-2001 钢结构现场检测技术标准 GB/T50621-2010 9 外观 钢结构现场检测技术标准 GB/T50621-2010 1 钢结构 10 尺寸与偏差 1101 钢结构现场检测技术标准 GB/T50621-2010 11 损伤 建筑结构检测技术标准 GB/T 50344-2004 钢结构现场检测技术标准 GB/T50621-2010 12 局部变形 钢结构现场检测技术标准 GB/T50621-2010 13 承载力 建筑结构检测技术标准 GB/T 50344-2004 钢结构检测评定及加固技术规程 YB 9257-1996 钢结构工程施工及验收规范 GB 50205-2001 14 变形监测 建筑变形测量规范 JGJ 8-2007 钢结构现场检测技术标准 GB/T50621-2010 钢结构工程施工质量验收规范 GB 50205-2001 2 钢结构节点 1 抗拉强度 301.01 钢网架螺栓球节点 JG 10-2009 钢网架焊接空心球节点 JG 11-2009 3 机械连接用紧固标准件及高强度螺栓 1 抗拉强度 301.01 金属材料 拉伸试验 第1部分:室温试验方法 GB/T228.1-2010 2 抗剪强度 销剪切试验方法 GB/T13683-1992 3 实物楔负载 紧固件机械性能 螺栓、螺钉和 螺柱 GB/T3098.1-2010 3 机械连接用紧固标准件及高强度螺栓 4 连接副紧固轴力 301.01 钢结构用扭剪型高强度螺栓连接副 GB/T 3632-2008 (不测M27、M30) 5 连接副的扭矩系数 钢结构用高强度大六角头螺栓、大六角螺母、垫圈技术条件 GB/T 1231-2006 钢结构工程施工质量验收规范 GB 50205-2001 6 抗滑移系数 钢结构工程施工质量验收规范 GB 50205-2001 二十 建筑物 1 建筑物变形 1 沉降观测 1017 建筑变形测量规范 JGJ 8-2007 工程测量规范 GB 50026-2007 只做:二级、三级. 2 倾斜观测 3 裂缝观测 建筑变形测量规范 JGJ 8-2007 建筑结构检测技术标准 GB/T 50344-2004 混凝土结构试验方法标准 GB 50152-92 4 挠度 建筑变形测量规范 JGJ 8-2007 2 主体结构 1 位移 1017 混凝土结构试验方法标准GB50152-1992 2 速度 爆破安全规程 GB 6722-2003 2 主体结构 3 加速度 1017 住宅建筑室内振动限值及其测量方法标准 GB/T50355-2005 4 频率 住宅建筑室内振动限值及其测量方法标准 GB/T50355-2005 爆破安全规程GB 6722-2003 5 应变 混凝土结构试验方法标准GB50152-1992 二十一 空气质量 1 室内环境污染物 1 氡0238 环境空气中氡的标准测量方法 GB/T14582-1993 2 游离甲醛 公共场所空气中甲醛测定方法 GB/T18204.26-2000 3 苯 民用建筑工程室内环境污染控制规范 GB50325-2010 4 氨 公共场所空气中氨测定方法 GB/T18204.25-2000 5 TVOC 民用建筑工程室内环境污染控制规范 GB50325-2010 2 空气 1 温度 0238 公共场所空气温度测定方法 GB/T18204.13-2000 2 相对湿度 公共场所空气湿度测定方法 GB/T18204.14-2000 3 空气流速 公共场所风速测定方法 GB/T18204.15-2000 4 新风量 公共场所室内新风量测定方法 GB/T18204.18-2000 2 空气 5 SO2 238 环境空气 二氧化硫的测定 甲醛吸收- 副玫瑰苯胺分光光度法 HJ 482-2009 6 NO2 环境空气 二氧化氮的测定 Saltzman法GB/T15435-1995 7 CO 公共场所空气中一氧化碳测定方法GB/T18204.23-2000 8 CO2 公共场所空气中二氧化碳测定方法GB/T18204.24-2000 9 氨 公共场所空气中氨测定方法 GB/T18204.25-2000 10 甲醛 公共场所空气中甲醛测定方法 GB/T18204.26-2000 11 臭氧 公共场所空气中臭氧测定方法 GB/T18204.27-2000 12 苯 居住区大气中苯、甲苯和二甲苯卫生检验标准方法 气相色谱法GB/T11737-1989 13 甲苯 环境空气 苯系物的测定 固体吸附/热脱附-气相色谱法 HJ 583-2010 14 二甲苯 15 可吸入颗粒物 室内空气中可吸入颗粒物卫生标准GB/T17095-1997 16 TVOC 民用建筑工程室内环境污染控制规范 GB50325-2010 17 氡 环境空气中氡的标准测量方法 GB/T14582-1993 2 空气 18 总悬浮颗粒物 238 环境空气 总悬浮颗粒物的测定 重量法 GB/T15432-1995 19 γ辐射剂量率 环境地表γ辐射剂量率测定规范GB/T14583-1993 二十二 水质测定 1 水1PH值0233 水质 PH值的测定 玻璃电极法 GB6920-1986 2 溶解氧 水质 溶解氧的测定 电化学探头法 HJ 506-2009 3 悬浮物 水质 悬浮物的测定 重量法 GB11901-1989 4 生化需氧量(BOD5) 水质 五日生化需氧量(BOD5)的测定稀释与接种法 HJ 505-2009 5 化学需氧量(COD) 水质 化学需氧量的测定 重铬酸盐法 GB11914-1989 二十三 太阳能应用系统 1 独立光伏系统 1 光伏阵列输出电流和压值 1515 独立光伏系统-设计验证 IEC 62124:2004 只测:对电流、电压、温度、 辐照度参数进行检验 2 负载电流和电压值 1 独立光伏系统 3 环境温度 1515 独立光伏系统-设计验证 IEC 62124:2004 只测:对电流、电压、温度、 辐照度参数进行检验 4 光伏组件温度 5 蓄电池温度 6 太阳辐照度 2 并网光伏系统(光伏系统电能质量) 1 谐波和波形畸变 1515 光伏系统并网技术要求 GB/T19939-2005 只测:对已通过本标准中安全和防护检验合格的产品进行检验. 2 频率 3 电压偏差 4 三相电压不平衡度 3 并网光伏系统(光伏系统电性能) 1 电流 1515 光伏系统性能监测、测量、数据交换和分析导则GB/T20513-2006 只测:对参数进行测量,不能进行分析 2 电压 3 有功功率 4 无功功率 5 功率因数 4 并网光伏系统(光伏系统环境参数) 1 环境温度 1515 光伏系统性能监测、测量、数据交换和分析导则GB/T20513-2006 只测:对参数进行测量,不能进行分析 2 组件温度 3 太阳辐照度 二十四 红外热成像 1 建筑外墙饰面层 1 粘结缺陷 1207 红外热像法检测建筑外墙饰面层粘结缺陷技术规程CECS204:2006 2 带电设备 1 温差 带电设备红外诊断应用规范 DL/T 664-2008 二十五 节能检测 1 热舒适度 1 空气温度 1519 中等热环境 PMV和PPD指数的测定及热舒适GB/T 18049-2000 2 湿度 3 黑球温度 热环境 根据WBGT指数(湿球黑球温度)对作业人员热负荷的评价 GB/T17244-1998 4 相对空气流速 中等热环境 PMV和PPD指数的测定及热舒适GB/T 18049-2000 2 室外太阳辐射 1 太阳总辐射 1519 地面气象观测规范 第11部分:辐射观测 QX/T55-2007 2 太阳散射辐射 3 外墙节能构造 1 外墙节能构造钻芯检验 1017 建筑节能工程施工质量验收规范GB50411-2007附录C 建筑节能工程施工验收规范 SZJG 31-2010附录E 4 工业锅炉节能监测 1 排烟温度 1102 燃煤工业锅炉节能监测 GB/T15317-2009 2 空气系数 3 炉体外表面温度 5 工业锅炉热工性能 1 热效率 1102 工业锅炉热工性能试验规程 GB/T 10180-2003 6 锅炉大气污染物排放 1 SO2浓度 1102 锅炉大气污染物排放标准 GB 13271-2001 2 NOX浓度 7 热力系统节能监测 1 外表面温度 1102 热力输送系统节能监测方法 GB/T15910-2009 2 环境温度 3 环境风速 二十六 建筑声环境 1 建筑隔声 1 现场空气声?隔声 1404.06 声学 建筑和建筑构件隔声测量 第4部分:房间之间空气声隔声的现场测量 GB/T 19889.4-2005 声学 建筑和建筑构件隔声测量 第5部分:外墙构件和外墙空气声隔声的现场测量 GB/T 19889.5-2006 2 现场撞击声?隔声 声学 建筑和建筑构件隔声测量 第7部分:楼板撞击声隔声的现场测量 GB/T 19889.7-2005 2 体育馆声学 1 混响时间 1404.06 体育馆声学设计和测量规程 JGJ/T 131-2000 2 背景噪声 3 最大声压级 2 体育馆声学 4 传输频率特性 1404.06 体育馆声学设计和测量规程 JGJ/T 131-2000 5 传声增益 6 声场不均匀度 3 厅堂混响时间 1 混响时间 1404.07 厅堂混响时间测量规程 GBJ 76-1984 4 声场 1 噪声 1404.02 1404.06 工业企业厂界环境噪声排放标准 GB 12348-2008 声环境质量标准GB 3096-2008 声学 环境噪声的描述、测量与评价 第1部分:基本参量与评价方法 GB/T3222.1-2006 声学 环境噪声的描述、测量与评价 第2部分:环境噪声级测定 GB/T3222.2-2009 建筑施工场界噪声限值GB 12523-1990 建筑施工场界噪声测量方法 GB 12524-1990 社会生活环境噪声排放标准 GB22337-2008 二十七 型材及密封胶 1 型材 (门窗型材) 1 尺寸 0301 0302 铝合金建筑型材 第1部分:基材 GB 5237.1-2008 铝合金建筑型材 第2部分:阳极氧化型材GB 5237.2-2008 铝合金建筑型材 第3部分:电泳涂漆型材GB 5237.3-2008 铝合金建筑型材 第4部分:粉末喷涂型材GB 5237.4-2008 铝合金建筑型材 第5部分:氟碳漆喷涂型材GB 5237.5-2008 门、窗用未增塑聚氯乙烯(PVC-U)型材 GB/T8814-2004 铝幕墙板、板基 YS/T429.1-2000 铝幕墙板、氟碳喷涂铝单板 YS/T 429.2-2000 金属吊顶QB1561-1992 2 外观 3 抗拉强度 金属材料 拉伸试验 第1部分:室温试验方法 GB/T228.1-2010 4 伸长率 5 膜厚/涂层厚度 非磁性基体金属上非导电覆盖层厚度测量 涡流方法 GB/T4957-2003 6 氧化膜封孔质量 铝及铝合金阳极氧化 氧化膜封孔质量的评定方法 第2部分:硝酸预浸的磷铬酸法 GB/T 8753.2-2005 1 型材 (门窗型材) 7 漆膜附着力/附着力 0301 0302 漆膜附着力测定法GB1720-1979 色漆和清漆 漆膜的划格试验 GB/T9286-1998 8 耐沸水性 铝合金建筑型材 第3部分:电泳涂漆型材 GB 5237.3-2008 铝合金建筑型材 第4部分:粉末喷涂型材 GB 5237.4-2008 9 耐盐酸性 铝合金建筑型材 第3部分:电泳涂漆型材 GB 5237.3-2008 铝合金建筑型材 第4部分:粉末喷涂型材 GB 5237.4-2008 铝合金建筑型材 第5部分:氟碳漆喷涂型材 GB 5237.5-2008 10 耐溶剂性 11 耐冲击性 铝合金建筑型材 第4部分:粉末喷涂型材 GB 5237.4-2008 铝合金建筑型材 第5部分:氟碳漆喷涂型材GB 5237.5-2008 12 漆膜硬度 色漆和清漆 铅笔法测定漆膜硬度 GB/T 6739-2006 13 维卡软化温度 热塑性塑料维卡软化温度(VST)的测定 GB/T1633-2000 14 加热后状态 门、窗用未增塑聚氯乙烯(PVC-U)型材 GB/T8814-2004 1 型材 (门窗型材) 15 加热后尺寸变化率 0301 0302 门、窗用未增塑聚氯乙烯(PVC-U)型材 GB/T8814-2004 16 纵向剪切试验 铝合金建筑型材 第6部分:隔热型材 GB 5237.6-2004 17 横向拉伸试验 2 硅酮结构密封胶 1 邵尔硬度 0318 硫化橡胶或热塑性橡胶 压入硬度试验方法 第1部分:邵氏硬度计法(邵尔硬度) GB/T531.1-2008 2 表干时间 建筑密封材料试验方法 第5部分:表干时间的测定 GB/T13477.5-2002 3 流动性 建筑密封材料试验方法 第6部分:流动性的测定 GB/T13477.6-2002 4 拉伸粘结性 建筑密封材料试验方法 第8部分:拉伸粘结性的测定GB/T13477.8-2002 5 浸水后拉伸粘结强度 建筑密封材料试验方法 第9部分:浸水后拉伸粘结性的测定GB/T13477.9-2002 6 热老化 建筑用硅酮结构密封胶GB16776-2005 7 与附件相容性 8 与基材相容性 二十八 通风与空调工程 1 通风空调 1 风速和风量 343.04 通风空调工程施工质量验收规范 GB50243-2002 组合式空调机组 GB/T14294-2008 2 风压 3 漏光 通风空调工程施工质量验收规范 GB50243-2002 通风管道技术规程 JGJ141-2004 4 漏风量 5 耐压强度 通风管道技术规程JGJ141-2004 6 水压力 通风空调工程施工质量验收规范 GB50243-2002 7 转速 8 温度 公共建筑节能检测标准 JGJ/T 177-2009 9 水流量 给排水用超声流量计(传播速度差法) CJ/T 3063-1997 10 功率 直接作用模拟指示电测量仪表及其附件 第3部分: 功率表和无功功率表的特殊要求 GB/T 7676.3-1998 11 耗电输热比 公共建筑节能设计标准 GB 50189-2005 1 通风空调 12 单位风量耗功率 343.04 公共建筑节能设计标准 GB 50189-2005 13 噪声声压级 采暖通风与空气调节设备噪声声功率级的测定-工程法 GB9068-1988 2 玻璃纤维增强塑料冷却塔 1 热力性能 343.04 玻璃纤维增强塑料冷却塔 第1部分:中小型玻璃纤维增强塑料冷却塔 GB 7190.1-2008 冷却塔验收测试规程 CECS118-2000 2 噪声 3 耗电比 4 空塔风量 5 飘水率 3 空调通风系统运行管理综合效果 1 室内温度 343.04 公共场所空气温度测试方法GB/T18204.13-2000 2 室内相对湿度 公共场所空气湿度测试方法GB/T18204.14-2000 3 室内气流速度 公共场所空气流速测定方法GB/T18204.15-2000 4 新风量 公共场所新风量测定方法GB/T18204.18-2000 5 室内噪声 公共场所噪声测定方法 GB/T18204.22-2000 6 一氧化碳 公共场所中一氧化碳测定方法 GB/T18204.23-2000 3 空调通风系统运行管理综合效果 7 二氧化碳 公共场所二氧化碳测定方法GB/T18204.24-2000 8 设备及管道保温 设备及管道绝热效果的测试与评价 GB/T 8174-2008 4 空气调节系统经济运行 1 单位面积空调能耗 343.04 空气调节系统经济运行 GB/T17981-2007 2 单位面积空调耗冷量 3 空调系统能效比 4 制冷系统能效比 5 冷冻水输送系数 6 空调末端能效比 7 冷水机组运行效率 8 冷却水输送系数 5 风机机组与管网系统节能监测 1 风机全压 343.04 风机机组与管网系统节能监测方法GB/T15913-2009 2 风机流量 3 风机机组电能利用率 4 电动机负载率 6 空气压缩机组及供气系统节能监测 1 排气温度 343.04 空气压缩机组及供气系统节能监测方法 GB/T16665-1996 2 冷却水进水温度 3 冷却水进出水温度差 4 空气压缩机组用电单耗 7 泵类液体输送系统节能监测 1 电动机负载率 343.04 泵类液体输送系统节能监测方法GB/T16666-1996 2 泵类及效率 3 泵类及液体输送系统效率 二十九 建筑光环境 1 建筑采光 1 采光系数 0328 采光测量方法 GB/T 5699-2008 2 反射比/反射系数 3 透射比 2 照明工程 1 照度 0328 照明测量方法 GB/T 5700-2008 体育场馆照明设计及检测标准 JGJ 153-2007 2 照明功率密度 照明测量方法 GB/T 5700-2008 2 照明工程 3 亮度 328 照明测量方法 GB/T 5700-2008 4 显色指数 照明测量方法 GB/T 5700-2008 体育场馆照明设计及检测标准 JGJ 153-2007 5 相关色温 CHINA NATIONAL ACCREDITATION SERVICE FOR CONFORMITY ASSESSMENT APPENDIX OF ACCREDITATION CERTIFICATE (Registration No. CNAS L0931) NAME:Shenzhen Institute of Building Research Co., Ltd. ADDRESS: No.29, Mei'ao 3rd Road, Upper Meilin, Futian District, Shenzhen, Guangdong, China Date of Issue:2012-01-18 Date of Expiry:2015-01-17 Date of Update:2012-01-18 APPENDIX 1 SCOPE OF ACCREDITED TESTING № Test Object Item/Parameter Code of Field Title, Code of Standard or Method Limitation Note № Item/ Parameter Ⅰ Concrete material 1 Cement 1 Setting time 1001 Test methods for water requirement of normal consistency,setting time and soundness of the portland cements GB/T1346-2001 2 Soundness 3 Water requirement for normal consistency for cement paste 1 Cement 4 Fineness 1001 The test sieving method for fineness of cement GB/T1345-2005 Testing method for specific surface of cement - Blaine method GB/T8074-2008 5 Mortar strength(IS0) Method of testing cements- -Determination of strength GB/T17671-1999 6 Mortar strength(rapid method) Accelerated test method for cement strength JC/T738-2004 7 Mortar fluidity Test method for fluidity of cement mortar GB/T2419-2005 8 Density Standard test method for cement density GB/T208-1994 9 Loss on ignition 1001 Method for chemical analysis of cement GB/T176-2008 10 Oxidation of sulfide 11 Potassium oxide and sodium oxide 2 Common portland cement Part parameters. 1001 Common portland cement GB175-2007 Accredited only for:Setting time,Soundness,Water requirement for normal consistency for cement paste,Fineness,Mortar strength(IS0),Mortar strength(rapid method),Mortar fluidity,Density,Loss on ignition,Oxidation of sulfide,Potassium oxide and sodium oxide 3 White portland cement Part parameters. 1001 White portland cement GB2015-2005 Accredited only for:Setting time,Soundness,Water requirement for normal consistency for cement paste,Fineness,Mortar strength(IS0),Potassium oxide and sodium oxide 4 Masonry cement Part parameters. Masonry cement GB/T 3183-2003 Accredited only for:Setting time,Soundness,Water requirement for normal consistency for cement paste,Fineness,Mortar strength(IS0),Potassium oxide and sodium oxide 5 Sand 1 Sieve analysis/particle size grading 1006 Standard for technical requirements and test method of sand and crushed stone (or gravel) for ordinary concrete JGJ52-2006 2 Apparent density 3 Stacking density 4 Compact density 5 Soil content 6 Soil block content 7 Stone powder content 8 Water absorption 9 Water content 10 Content of chloride ion 11 Organism content 12 Mica content 13 Alkali activity 14 Soundness 5 Sand 15 Content of light substance 1006 Standard for technical requirements and test method of sand and crushed stone (or gravel) for ordinary concrete JGJ52-2006 16 SulpHide and sulpHate content 6 Stone 1 Sieve analysis/particle size grading 1006 Standard for technical requirements and test method of sand and crushed stone (or gravel) for ordinary concrete JGJ52-2006 2 Apparent density 3 Stacking density 4 Compact density 5 Soil content 6 Soil block content 7 Water content 8 Water absorption 9 Organism content 6 Stone 10 Soundness 1006 Standard for technical requirements and test method of sand and crushed stone (or gravel) for ordinary concrete JGJ52-2006 11 Content of spiculate and flaky grain 12 SulpHide and sulpHate content 13 Compressive strength of rock Standard for technical requirements and test method of sand and crushed stone (or gravel) for ordinary concrete JGJ52-2006 Standard for tests method of engineering rock massas GB/T 50266-1999 6 Stone 14 Crushing index 1006 Standard for technical requirements and test method of sand and crushed stone (or gravel) for ordinary concrete JGJ52-2006 15 Alkali activity/alkali-aggregate reaction 16 Grain content? of Hill cover and Incrustation of crushed rock Specifications for Concrete Construction of Port and Waterway Engineering JTJ268-1996 7 Lightweight aggregates 1 Sieve analysis/particle size grading 1006 Lightweight aggregates and its test methods. Part 2: Test methods for lightweight aggregates GB/T 17431.2-2010 2 Compact density 3 Grain strength 4 Water absorption 5 Soften coefficient 7 Lightweight aggregates 6 Boiling weight loss 1006 Lightweight aggregates and its test methods. Part 2: Test methods for lightweight aggregates GB/T 17431.2-2010 7 Loss on ignition 8 Soil content 9 Sulhpide and sulpHate content 8 Water for concrete 1 pH value 1016 Water quality--Determination of pH value--Glass electrode method GB/T 6920-1986 2 Insoluble matter Water quality--Determination of suspended substance— Gravimetric method GB/T 11901-1989 3 Soluble matter Standard examination methods for drinking water organoleptic and pHysical parameters GB 5750.4-2006 8 Water for concrete 4 Chloride 1016 Water quality--Determination of chloride--Silver nitrate titration method GB/T 11896-1989 5 SulpHate content Water quality--Determination of sulfate--Gravimetric method GB/T 11899-1989 6 Alkali content Method for chemical analysis of cement GB/T176-2008 7 Setting time Test methods for water requirement of normal consistency,setting time and soundness of the portland cements GB/T1346-2001 8 Setting time difference 9 Compressive strength ratio Method of testing cements--Determination of strength GB/T17671-1999 9 Admixture 1 Solid content 1016 Methods for testing uniformity of concrete admixture GB/T8077-2000 9 Admixture 2 Water content 1016 Methods for testing uniformity of concrete admixture GB/T8077-2000 3 Density 4 Content of chloride ion 5 Fluidity for cement paste 6 Work-ability of cement mortar 7 pH value 8 Water reducing ratio Concrete admixtures GB 8076-2008 9 Fineness The test sieving method for fineness of cement GB/T1345-2005 Methods for testing uniformity of concrete admixture GB/T 8077-2000 10 Sodium sulpHate Methods for testing uniformity of concrete admixture GB/T 8077-2000 11 Air content Standard for test method of performance on ordinary fresh concrete GB/T 50080-2002 9 Admixture 12 Frost resistance 1016 Standard for test methods of long-term performance and durability of ordinary concrete GB/T 50082-2009 13 Total alkali content Methods for testing uniformity of concrete admixture GB/T 8077-2000 Method for chemical analysis of cement GB/T176-2008 14 Setting time/Setting time defference Concrete admixtures GB8076-2008 Test methods for water requirement of normal consistency,setting time and soundness of the portland cements GB/T1346-2001 Flash setting admixtures for shotcrete JC477-2005 Testing methods of mortar basic property JGJ/T 70-2009 9 Admixture 15 Compressive strength ratio 1016 Concrete admixtures GB8076-2008 Water-repellent admixture for mortar and concrete JC 474-2008 Flash setting admixtures for shotcrete JC477-2005 16 Shrinkage ratio Concrete admixtures GB8076-2008 Water-repellent admixture for mortar and concrete JC 474-2008 17 Slump increase/Slump retaining value Pumping aid for concrete JC473-2001 18 Ratio of water-segregation rate at normal atmospHeric pressure 19 Soundness of cement paste Test methods for water requirement of normal consistency,setting time and soundness of the portland cements GB/T1346-2001 9 Admixture 20 Leaking pressure ratio 1016 Water-repellent admixture for mortar and concrete JC 474-2008 21 Water sorption ratio in 48h 22 Leaking height ratio 23 Percentage of restrained expansion Expansive agents for concrete GB 23439-2009 24 Compressive strength Expansive agents for concrete GB 23439-2009 Method of testing cements--Determination of strength GB/T17671-1999 25 Availability index Mineral admixtures for high strength and high performance concrete GB/T18736-2002 26 Water requirement ratio 27 Vertical expansion ratio Code for utility technical of concrete admixture GB50119-2003 10 Adds 1 Fineness 1016 Fly ash used for cement and concrete GB/T1596-2005 10 Adds 2 Water requirement ratio 1016 Fly ash used for cement and concrete GB/T1596-2005 3 Water content Method for chemical analysis of cement GB/T176-2008 4 Loss on ignition 5 SulpHur trioxide 6 Density Standard test method for cement density GB/T208-1994 7 Availability index Ground granulated blast furnace slag used for cement and concrete GB/T 18046-2008 8 Fluidity ratio 11 Ordinary concrete 1 Slump and slump flow 1002 Standard for test method of performance on ordinary fresh concrete GB/T50080-2002 2 Setting time of concrete mixed 3 Bleeding of concrete mixed 11 Ordinary concrete 4 Apparent density of concrete mixed 1002 Standard for test method of performance on ordinary fresh concrete GB/T50080-2002 5 Air content of concrete mixed 6 Compressive strength Standard for test method of mechanical properties on ordinary concrete GB/T50081-2002 Technical specification for testing concrete strength with drilled core CECS 03:2007 7 Modulus of elasticity in static compression Standard for test method of mechanical properties on ordinary concrete GB/T50081-2002 8 Tensile strength 9 Bending strength 11 Ordinary concrete 10 Frost resistance 1002 Testing methods for long-term and long-lasting performance of ordinary concrete GB/T 50082-2009 11 Permeability resistance 12 shrinkage 13 Mix proportion design of ordinary concrete Specification for mix proportion design of ordinary concrete JGJ 55-2011 14 Content of chloride ion Technical standard for inspection of building structure GB/T 50344-2004 15 concrete electric flux Testing methods for long-term and long-lasting performance of ordinary concrete GB/T 50082-2009 12 Cementitious grout 1 Grain size 1005 Cementitious grout JC/T986-2005 2 Setting time 3 Bleeding rate 4 Fluidity 5 Compressive strength 12 Cementitious grout 6 Vertical expansion ratio 1005 Cementitious grout JC/T986-2005 13 Carbon fiber laminate 1 Tensile strength 1016 Test method for tensile properties of oriented fiber reinforced plastics GB/T3354-1999 2 Tensile modulus of elasticity 3 the elongation of tensile fracture Ⅱ Masonry materials 1 Brick 1 Dimension 1009 Test methods for wall bricks GB/T2542-2003 2 Appearance 3 Water absorption and saturation coefficient 4 Bulk density 5 Dry shrinkage 6 Bending strength Precast concrete paving units JC/T 446-200 7 Compression strength 1 Brick 8 Wearability 1009 Test method for abrasion resistance of inorganic paving materials GB/T12988-2009 9 Coefficient of percolating water Water permeable Brick JC/T 945-2005 2 Concrete curbs 1 Bending strength 1016 Concrete curbs JC899-2002 2 Compression strength 3 Water absorption 4 Appearance 5 Dimension 3 Block 1 Dimension 1009 Test methods for the small concrete hollow block GB/T4111-1997 Gypsum blocks JC/T698-2010 2 Appearance Test methods for the small concrete hollow block GB/T4111-1997 3 Block 3 Bulk density /Drying bulk density 1009 Test methods for the small concrete hollow block GB/T4111-1997 Test methods of autoclaved aerated concrete GB/T11969-2008 4 Void content Test methods for the small concrete hollow block GB/T4111-1997 5 Water content Test methods for the small concrete hollow block GB/T4111-1997 Test methods of autoclaved aerated concrete GB/T11969-2008 6 Water absorption 7 Compressive strength 8 Bending strength 9 Permeability resistance Test methods for the small concrete hollow block GB/T4111-1997 10 Drying shrinkage Test methods of autoclaved aerated concrete GB/T11969-2008 3 Block 11 Axial compressive strength 1009 Test methods of autoclaved aerated concrete GB/T11969-2008 12 Tensile strength 4 Partition-ing 1 Appearance 1016 Concrete hollow panels contained industrial fly ash and waste slags for partition wall in buildings JG3063-1999 Light weight panels for partition walls used in buildings JG/T 169-2005 Double skin metal faced insulating panels for building GB/T 23932-2009 Hollow concrete panel contained solid wastes for partition wall GB/T 23449-2009 2 Dimension 4 Partition-ing 3 Impact resistance 1016 Concrete hollow panels contained industrial fly ash and waste slags for partition wall in buildings JG3063-1999 Light weight panels for partition walls used in buildings JG/T 169-2005 Hollow concrete panel contained solid wastes for partition wall GB/T23449-2009 4 Compressive strength 5 Damaging load at bending 6 Surface denisty 7 Drying shrinkage value 8 Hanging force resistance 4 Partition-ing 9 Water content 1016 Light weight panels for partition walls used in buildings JG/T 169-2005 Hollow concrete panel contained solid wastes for partition wall GB/T23449-2009 10 Cohesive strength Double skin metal faced insulating panels for building GB/T 23932-2009 11 Peel properties 12 Bending load Ⅲ Mortar 1 Mortar 1 Consistency 1001 Standard for test method of basic properties of construction mortar JGJ/T 70-2009 2 Apparent density 3 Extent of leyer 4 Frost resistance 5 Consistency Loss in Plastic Time Technical specification for application of ready-mixed mortar SJG12-2010 1 Mortar 6 Setting time 1001 Standard for test method of basic properties of construction mortar JGJ/T 70-2009 Polymer modified cement mortars for waterproof JC/T984-2005 7 Compressive strength Standard for test method of basic properties of construction mortar JGJ/T 70-2009 Method of testing cements--Determination of strength GB/T17671-1999 8 Bending strength Method of testing cements--Determination of strength GB/T17671-1999 9 Dimendional change / Shrinkage ratio Standard for test method of basic properties of construction mortar JGJ/T 70-2009 Cementitious self-leveling floor mortar JC/T985-2005 1 Mortar 10 Fluidity 1001 Test method for fluidity of cement mortar GB/T2419-2005 Cementitious self-leveling floor mortar JC/T985-2005 11 Water retention property Standard for test method of basic properties of construction mortar JGJ/T 70-2009 Practice code for dry-mixed mortar DBJ/T15-36-2004 Technical specification for manufacture of ready-mixed mortar SJG11-2010 Practice code for ready-mixed mortar DBJ/T15-37-2004 Technical specification for application of ready-mixed mortar SJG 12-2010 Ready-mixed mortar JG/T230-2007 1 Mortar 12 Impermeability grade 1001 Practice code for dry-mixed mortar DBJ/T15-36-2004 Technical specification for manufacture of ready-mixed mortar SJG11-2010 Practice code for ready-mixed mortar DBJ/T15-37-2004 Technical specification for application of ready-mixed mortar SJG 12-2010 Polymer modified cement mortars for waterproof JC/T984-2005 13 Tensile bond strength Practice code for dry-mixed mortar DBJ/T15-36-2004 Technical specification for manufacture of ready-mixed mortar SJG11-2010 1 Mortar 13 Tensile bond strength 1001 Practice code for ready-mixed mortar DBJ/T15-37-2004 Cementitious self-leveling floor mortar JC/T985-2005 Polymer modified cement mortars for waterproof JC/T984-2005 Special masonry mortar and plaster mortar for autoclaved aerated concrete JC890-2001 14 Impact resistance Cementitious self-leveling floor mortar JC/T985-2005 15 Alkali resistance Polymer modified cement mortars for waterproof JC/T984-2005 16 Heat resistance 17 Thermal coefficient Special masonry mortar and plaster mortar for autoclaved aerated concrete JC890-2001 1 Mortar 18 Open assembly time 1001 Interface treating agent for concrete JC/T 907-2002 19 Shear bond strength 20 Mix proportion design of masonry mortar Specification for mix proportion design of masonry mortar JGJ 98-2010 2 Grouts for ceramic wall and floor tiles 1 Abrasion resistance 1009 Grouts for ceramic wall and floor tiles JC/T1004-2006 2 Drying shrinkage 3 Bending strength 4 Bending strength after freezing and thawing 5 Compressive strength 6 Compressive strength after freezing and thawing 7 Water absorption 3 Concrete floor hardener 1 Bending strength 1019 Method of testing cements--Determination of strength GB/T17671-1999 3 Concrete floor hardener 2 Compressive strength 1019 Method of testing cements--Determination of strength GB/T17671-1999 3 Wear resistance ratio Test method for abrasion resistance of concrete and its products (Ball bearing method) GB/T16925-1997 4 Surface strength Concrete floor hardener JC/T906-2002 Ⅳ Metallic material, Metal Products, weldments and jointer 1 Steel bars /Steels 1 Yield strength 0301 0201.01 Metallic materials - Tensile testing - Part 1 : Method of test at room temperature GB/T228.1-2010 2 Tensile strength 3 Percentage extension 4 bend Metallic materials--Bend test GB/T232-2010 1 Steel bars /Steels 5 weight deviation 0301 0201.01 Steel for the reinforcement of concrete-Part 2:Hot rolled ribbed bars GB1499.2-2007 Steel for the reinforcement of concrete—Part 1:Hot rolled plain bars GB 1499.1-2008 6 Shearing strength Pins and grooved pins-Shear test GB/T13683-1992 7 Rockwell hardness Metallic materials - Rockwell hardness test - Part 1: Test method(scales A、B、C、D、E、F、G、H、K、N、T) GB/T 230.1-2009 1 Steel bars /Steels 8 Carbon content 0301 0201.01 Iron, steel and alloy - Determination of carbon contents - Gas-volumetric method after combustion in the pipe furnace GB/T223.69-2008 Steel and iron—Determination of total carbon and sulfur content Infrared absorption method after combustion in an induction furnace (routine method) GB/T 20123-2006 1 Steel bars /Steels 9 SulpHur content 0301 0201.01 Methods for chemical analysis of iron, steel and alloy. The potassium iodate titration method after combustion in the pipe furnace for the determination of sulfur content GB/T223.68-1997 Steel and iron—Determination of total carbon and sulfur content Infrared absorption method after combustion in an induction furnace (routine method) GB/T 20123-2006 10 Manganese content Methods for chemical analysis of iron, steel and alloy--The sodium(potassium)periodate pHotometric method for the determination of manganese content GB/T 223.63-1988 1 Steel bars /Steels 11 Silicon content 0301 0201.01 Steel and iron - Determination of acid-soluble silicon and total silicon content - Reduced molybdosilicate spectropHotometric method GB/T223.5-2008 12 PHospHorus content Iron,steel and alloy - Determination of pHospHorus content - Bismuth pHospHomolybdate blue spectropHotometric method and antimony pHospHomolybdate blue spectropHotometric method GB/T223.59-2008 2 Cold rolled ribbed steel wires and bars Part parameters. 0301 0201.01 Cold rolled ribbed steel wires and bars GB13788-2008 Accredited only for:Yield strength,Tensile strength,Percentage extension,bend,weight deviation ,Carbon content,SulpHur content,Manganese content,Silicon content,PHospHorus content 3 Steel for the reinforcement of Concrete :t rolled ribbed bars Part parameters. 0301 0201.01 Steel for the reinforcement of concrete-Part 2:Hot rolled ribbed bars GB1499.2-2007 Accredited only for:Yield strength,Tensile strength,Percentage extension,bend,weight deviation ,Carbon content,SulpHur content,Manganese content,Silicon content,PHospHorus content 4 Steel for the reinforcement of concrete: ot rolled plain bars Part parameters. 0301 0201.01 Steel for the reinforcement of concrete—Part 1:Hot rolled plain bars GB 1499.1-2008 Accredited only for:Yield strength,Tensile strength,Percentage extension,bend,weight deviation ,Carbon content,SulpHur content,Manganese content,Silicon content,PHospHorus content 5 Screw-thread steel bars for the prestressing of concrete Part parameters. 0301 0201.01 Screw-thread steel bars for the prestressing of concrete GB/T20065-2006 Accredited only for:Yield strength,Tensile strength,Percentage extension,bend,weight deviation ,Carbon content,SulpHur content,Manganese content,Silicon content,PHospHorus content 6 Cold-rolled and twisted bars Part parameters. 0301 0201.01 Cold-rolled and twisted bars JG190-2006 Accredited only for:Yield strength,Tensile strength,Percentage extension,bend,weight deviation ,Carbon content,SulpHur content,Manganese content,Silicon content,PHospHorus content 7 High strength low alloy structural steels Part parameters. 0301 0201.01 High strength low alloy structural steels GB/T1591-2008 Accredited only for:Yield strength,Tensile strength,Percentage extension,bend,Shearing strength,Rockwell hardness,Carbon content,SulpHur content,Manganese content,Silicon content,PHospHorus content 8 Continual hot-dip zinc-coated steel sheets and strips Part parameters. 0301 0201.01 Continual hot-dip zinc-coated steel sheets and strips GB/T 2518-2004 Accredited only for:Yield strength,Tensile strength,Percentage extension,bend,Shearing strength,Rockwell hardness,Carbon content,SulpHur content,Manganese content,Silicon content,PHospHorus content 9 Quality carbon structural steels Part parameters. 0301 0201.01 Quality carbon structural steels GB/T699-1999 Accredited only for:Yield strength,Tensile strength,Percentage extension,bend,Shearing strength,Rockwell hardness,Carbon content,SulpHur content,Manganese content,Silicon content,PHospHorus content 10 Carbon structural steels Part parameters. 0301 0201.01 Carbon structural steels GB/T700-2006 Accredited only for:Yield strength,Tensile strength,Percentage extension,bend,Shearing strength,Rockwell hardness,Carbon content,SulpHur content,Manganese content,Silicon content,PHospHorus content 11 Prepainted steel sheet Part parameters. 0301 0201.01 Prepainted steel sheet GB/T 12754-2006 Accredited only for:Yield strength,Tensile strength,Percentage extension,bend,Shearing strength,Rockwell hardness,Carbon content,SulpHur content,Manganese content,Silicon content,PHospHorus content 12 Steel wires for the prestressing of concrete Part parameters. 0301 0201.01 Steel wires for the prestressing of concrete GB/T 5223-2002 Accredited only for:Yield strength,Tensile strength,Percentage extension 13 Low carbon steel wire for general uses Part parameters. 0301 Low carbon steel wire for general uses YB/T 5294-2009 Accredited only for:Yield strength,Tensile strength,Percentage extension 14 Zinc coat of steel products 1 Zn-coat quality (thickness) 0301 Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products GB/T 1839-2008 Metallic coatings--Hot dip galvanized coatings on fabricated iron and steel articles--Specifications and test methods GB/T13912-2002 15 Metal weldments 1 Tensile strength 0303 Tensile test method on welded joints GB/T2651-2008 2 Bend Bend test methods on welded joints GB/T2653-2008 16 Welding steel bars 1 Tensile strength 0303 Standard for Test Methods of Welded Joint of Steel Bars JGJ/T 27-2001 16 Welding steel bars 2 Bending Standard for Test Methods of Welded Joint of Steel Bars JGJ/T 27-2001 Technical specification for concrete structures reinforced with welded steel fabric JGJ 114-2006 3 Anti-shear force Steel for the reinforcement of concrete - Part 3 : Welded fabric GB/T1499.3-2010 17 Mechanical splicing of bars 1 Tensile strength 0323 Technical specification for mechanical splicing of steel reinforcing bars JGJ 107-2010 Rolled parallel thread splicing of rebars JG 163-2004 Parallel thread rebar splice with upsetting end JG 171-2005 2 Residual deformation Technical specification for mechanical splicing of steel reinforcing bars JGJ 107-2010 18 Steel wires,Anchorage, grip 1 Tensile strength 0301 Steel strand for prestressed concrete GB/T5224-2003(2008) 2 Min breaking load 3 Nonproportionl extension load 4 Elongation percentage 5 Elastic modulus 6 Rockwell hardness Anchorage,grip and coupler for prestressing tendons GB/T 14370-2007 Metallic materials - Rockwell hardness test - Part 1: Test method(scales A、B、C、D、E、F、G、H、K、N、T) GB/T 230.1-2009 19 Corrugated metal ducts for pre-stressed concrete 1 Appearance 0301 Corrugated metal ducts for prestressed concrete JG 225-2007 2 Dimention 19 Corrugated metal ducts for pre-stressed concrete 3 Stiffness of neck direction on concentrated load 301 Corrugated metal ducts for prestressed concrete JG 225-2007 4 Stiffness of neck direction on even load 5 Leaking resist-ance after loading 6 Bending leakage resistance 20 Steel tube scaffold couplers 1 Tensile resistance 0301 Steel tube scaffold couplers GB15831-2006 2 Anti compressive 3 Sliding resistance 4 Anti-destroy 21 Steel cable tray 1 Loading test for steel cable tray 0301 Code for design of steel cable tray engineering CECS 31:2006 22 Steel furrings for buildings 1 Appearance 0301 Steel furrings for buildings GB/T 11981-2008 2 Dimension 3 Static loading test 22 Steel furrings for buildings 4 Rust prevention 301 Steel furrings for buildings GB/T 11981-2008 Ⅴ Precast concrete unit 1 Precast prestressed concrete floors 1 Load 1017 Code for acceptance of constructional quality of concrete structures GB50204-2002(2011) 2 Bending deflection 3 Crack breadth 2 Concrete and reinforced concrete sewer pipes 1 Appearance 0339 Test methods of concrete and reinforced concrete drainage and sewer pipes GB/T 16752-2006 2 Dimension 3 Inner water pressure 4 External load 5 Thickness of concrete cover 3 Concrete pipes for water transmission 1 Appearance 0339 Test methods of concrete pipes for water transmission GB/T 15345-2003 2 Dimension 3 Concrete pipes for water transmission 3 Hydraulic Test 339 Test methods of concrete pipes for water transmission GB/T 15345-2003 4 Thickness of concrete cover Ⅵ Decorating and refurbishing materials 1 Decorating materials 1 State in container 0215 Synthetic resin emulsion coatings for exterior wall GB/T9755-2001 Synthetic resin emulsion coatings for interior wall GB/T9756-2009 Solvent-thinned coatings for exterior wall GB/T9757-2001 Inorganic building coating for external wall JG/T26-2002 Multi-layer coatings for architecture GB9779-2005 Sand textured building coating based on synthetic resin emulsion JG/T24-2000 Primer for interior and exterior wall JG/T210-2007 Elastomeric wall coatings JG/T172-2005 Crosslinking fluorocarbon resin coatings HG/T3792-2005 1 Decorating materials 2 Workability/brushability 215 Synthetic resin emulsion coatings for exterior wall GB/T9755-2001 Synthetic resin emulsion coatings for interior wall GB/T9756-2009 Solvent-thinned coatings for exterior wall GB/T9757-2001 Inorganic building coating for external wall JG/T26-2002 Sand textured building coating based on synthetic resin emulsion JG/T24-2000 Primer for interior and exterior wall JG/T210-2007 Elastomeric wall coatings JG/T172-2005 1 Decorating materials 3 Paint film appearance 215 Synthetic resin emulsion coatings for exterior wall GB/T9755-2001 Synthetic resin emulsion coatings for interior wall GB/T9756-2009 Solvent-thinned coatings for exterior wall GB/T9757-2001 Inorganic building coating for external wall JG/T26-2002 Multi-layer coatings for architecture GB9779-2005 Environmental friendly silicon-acrylic emulsion multi-layer coatings for external thermal insulation JG/T206-2007 Primer for interior and exterior wall JG/T210-2007 Elastomeric wall coatings JG/T172-2005 Crosslinking fluorocarbon resin coatings HG/T3792-2005 1 Decorating materials 4 Stability at low temperature 215 Synthetic resin emulsion coatings for exterior wall GB/T9755-2001 Synthetic resin emulsion coatings for interior wall GB/T9756-2009 Inorganic building coating for external wall JG/T26-2002 Multi-layer coatings for architecture GB9779-2005 Sand textured building coating based on synthetic resin emulsion JG/T24-2000 Primer for interior and exterior wall JG/T210-2007 Elastomeric wall coatings JG/T172-2005 1 Decorating materials 5 Contrastion rate 215 Synthetic resin emulsion coatings for exterior wall GB/T9755-2001 Synthetic resin emulsion coatings for interior wall GB/T9756-2009 Solvent-thinned coatings for exterior wall GB/T9757-2001 Inorganic building coating for external wall JG/T26-2002 Sand textured building coating based on synthetic resin emulsion JG/T24-2000 Elastomeric wall coatings JG/T172-2005 Crosslinking fluorocarbon resin coatings HG/T3792-2005 6 Stain resistance Synthetic resin emulsion coatings for exterior wall GB/T9755-2001 Synthetic resin emulsion coatings for interior wall GB/T9756-2009 1 Decorating materials 6 Stain resistance 215 Solvent-thinned coatings for exterior wall GB/T9757-2001 Inorganic building coating for external wall JG/T26-2002 Multi-layer coatings for architecture GB9779-2005 Environmental friendly silicon-acrylic emulsion multi-layer coatings for external thermal insulation JG/T206-2007 Elastomeric wall coatings JG/T172-2005 Crosslinking fluorocarbon resin coatings HG/T3792-2005 7 Drying time Methods of test for drying time of coatings of paints and putties GB/T1728-1979(1989) 1 Decorating materials 8 Water resistance 215 Determination of resistance to water of films GB/T1733-1993 Crosslinking fluorocarbon resin coatings HG/T3792-2005 9 Alkali resistance Determination for alkali resistance of film of architectural paints and coatings GB9265-2009 10 Scrab resistance Determination of scrub resistance of film of architectural paints and coatings GB 9266-2009 11 Temperature change resistance / freeze-thaw resistance Determination for freeze-thaw resistance of film of building coatings JG/T25-1999 12 Cracking and dryness at initial stages Sand textured building coating based on synthetic resin emulsion JG/T24-2000 Multi-layer coatings for architecture GB9779-2005 1 Decorating materials 13 Cohesive strength(standard state, after soaking, after freezing and thawing) 215 Sand textured building coating based on synthetic resin emulsion JG/T24-2000 Multi-layer coatings for architecture GB9779-2005 14 Impact resistance Determination of impact resistance of film GB/T1732-1993 15 Solid content/involatile content Paints,varnishes and plastics-Determination of non-volatile-matter content GB/T 1725-2007 16 Flexibility Determination of flexibility of films GB/T1731-1993 17 Adhesion force Method of test for adhesion of paint films GB1720-1979 Paints and varnishes-Cross cut test for films GB/T9286-1998 Accredited only for draw cirde method draw case method 18 Salt water resistance Methods of test for chemical resistance of paint films GB/T 1763-1979 19 Capacity of coverage for coating Methods of test for hiding power of pain ts GB1726-1979 1 Decorating materials 20 Water permeability 215 Multi-layer coatings for architecture GB9779-2005 2 Fire resistive coating 1 State in container 0215 Fire resistive coating for steel structure GB 14907-2002 Finishing fire retardant paint GB 12441-2005 2 Drying time 3 Cracking and dryness at initial stages Fire resistive coating for steel structure GB 14907-2002 4 Cohesive strength 5 Water resistance 6 Fineness Finishing fire retardant paint GB 12441-2005 7 Adhesion 8 Flexibility 9 Impact resistance 10 Salt spray resistance 3 Putty 1 State in container 0215 Putty for interior JG/T298-2010 Waterproofing flexible putty for exterior thermal insulation systems JG/T 229-2007 3 Putty 2 Workability/brushability 215 Putty for exterior wall JG/T 157-2009 Putty for interior JG/T298-2010 Waterproofing flexible putty for exterior thermal insulation systems JG/T 229-2007 3 Drying time Methods of test for drying time of coatings of paints and putties GB/T1728-1979(1989) 4 Water resistance Determination of resistance to water of films GB/T1733-1993 5 Alkali resistance Determination for alkali resistance of film of architectural paints and coatings GB9265-2009 6 Cohesive strength(standard state, after soaking, after freezing and thawing) Waterproofing flexible putty for exterior thermal insulation systems JG/T 229-2007 3 Putty 7 Abrasion resistance 215 Putty for interior JG/T298-2010 Putty for exterior wall JG/T 157-2009 Waterproofing flexible putty for exterior thermal insulation systems JG/T 229-2007 8 Stability at low temperature Putty for interior JG/T298-2010 Putty for exterior wall JG/T 157-2009 9 Dynamic cracking resistance Putty for exterior wall JG/T 157-2009 10 Water absorption Putty for exterior wall JG/T 157-2009 Waterproofing flexible putty for exterior thermal insulation systems JG/T 229-2007 4 Ceramic tiles 1 Dimension 0390 Test methods of ceramic tiles-Part 2:Determination of dimensions and surface quality GB/T 3810.2-2006 2 Appearance 3 Flatness 4 Ceramic tiles 4 Water absorption 390 Test methods of ceramic tiles-Part 3:Determination of water absorption,apparent porosity,apparent relative density and bulk density GB/T 3810.3-2006 5 Heat shock resistance Test methods of ceramic tiles-Part 9:Determination of resistance to thermal shock GB/T 3810.9-2006 Ceramic mosaic JC 456-2005 6 Moisture expansion Test methods of ceramic tiles—Part 10:Determination of moisture expansion GB/T 3810.10-2006 7 Chemical corrosion resistance Test methods of ceramic tiles-Part 13:Determination of chemical resistance GB/T 3810.13-2006 8 Rupture modulusand breaking strength Test methods of ceramic tiles-Part 4:Determination of modulus of rupture and breaking strength GB/T 3810.4-2006 4 Ceramic tiles 9 Frost resistance 390 Test methods of ceramic tiles—Part 12:Determination of frost resistance GB/T 3810.12-2006 10 Wear-resistent deepth of unglazed brick Test methods of ceramic tiles—Part 6:Determination of resistance to deep abrasion for unglazed tiles GB/T 3810.6-2006 11 Connection quality Ceramic mosaic JC 456-2005 12 Thermal stability Glass mosaic GB/T 7697-1996 13 Chemical stability 14 Gloss index Test methods of specular gloss for decorative building materials GB/T 13891-2008 5 Natural facing stones 1 Appearance 0309 Specification for natural granite for building slab GB/T 18601-2009 Building batten made with natural marble GB/T 19766-2005 Dry-hanging nature facing huilding granite slab and fixing stainless steel systems--Part1:Dry-hanging nature facing building granite slab JC 830.1-2005 Natural sandstone for building slab GB/T 23452-2009 Natural limestone for building slab GB/T 23453-2009 2 Dimension 3 Angle 4 Flatness 5 Volume density Test methods for natural facing stones Part 3: Test methods for bulk density,true density,true porosity and water absorption GB/T9966.3-2001 5 Natural facing stones 6 Water absorption 309 Test methods for natural facing stones Part 3: Test methods for bulk density,true density,true porosity and water absorption GB/T9966.3-2001 7 Dry,wet and after freezing compressive strength Test methods for natural facing stones Part 1: Dry,wet and after freezing test methods for compressive strength GB/T9966.1-2001 8 Dry, wet flexural strength Test methods for natural facing stones Part 2: Dry and wet test methods for flexural strength GB/T9966.2-2001 9 Mirror luster Test methods of specular gloss for decorative building materials GB/T13891-2008 6 Man-made stone for decoration 1 Dimension 0309 Method for the inspectin of man-made stone for export SN/T 0308-1993 2 Density 3 Water absorption 6 Man-made stone for decoration 4 Bending strength 309 Method for the inspectin of man-made stone for export SN/T 0308-1993 5 Compressive strength 7 Concrete tiles 1 Dimension 1003 Concrete tiles JC/T 746-2007 2 Appearance 3 Water absorption 4 Load 5 Water impermeability 6 Frost resistance 8 Decoration panels 1 Appearance 0309 Decorating gypsum board JC/T 799-2007 Gypsum plasterboard GB /T 9775-2008 Mineral wool decorating and acoustic ecilings JC670-2005 Aluminium-plastic composite panel GB/T17748-2008 Glass fiber & magnesium cement board JC 688-2006 Fiber cement flat sheets Part 1:Non-Asbestos Fiber cement flat sheets JC/T 412.1-2006 Fiber cement flat sheets Part 2:Asbestos Fiber cement flat sheets JC/T 412.2-2006 2 Dimension 8 Decoration panels 2 Dimension 309 Fiber reinforced calcium silicate boards Part 1:Non-Asbestos calcium silicate boards JC/T 564.1-2008 Fiber reinforced calcium silicate boards Part 2:Asbestos calcium silicate boards JC/T 564.2-2008 Fiber reinforced low pH value cement flat sheet JC/T 626-2008 Vinylon fiber reinforced cement flat sheet JC/T 671-2008 Mineral wool decorating and acoustic ceilings GB/T 25998-2010 Aluminium-plastic composite panel for ordinary decoration GB/T 22412-2008 Aluminium panels for building decoration GB/T 23443-2009 Metal and metal-composite ceilings GB/T 23444-2009 Metal and metal-composite ceilings JC/T 1059-2007 8 Decoration panels 3 loading/ Bending strength 309 Gypsum plasterboard GB /T 9775-2008 Decorating gypsum board JC/T 799-2007 Mineral wool decorating and acoustic ecilings JC670-2005 Test methods for fiber cement products GB/T 7019-1997 Mineral wool decorating and acoustic ceilings GB/T 25998-2010 4 Deviation of diagonal length Gypsum plasterboard GB /T 9775-2008 5 Deviation of flatness 0309 Decorating gypsum board JC/T 799-2007 6 Thickness of coating Non-conductive coatings on non-magnetic basis metals—Measurement of coating thickness—Eddy current GB/T4957-2003 8 Decoration panels 7 Surface density 309 Decorating gypsum board JC/T 799-2007 Predecorated gypsum board JC/T997-2006 8 Water content Decorating gypsum board JC/T 799-2007 Mineral wool decorating and acoustic ecilings JC670-2005 Test methods for fiber cement products GB/T 7019-1997 Mineral wool decorating and acoustic ceilings GB/T 25998-2010 9 Water absorption Gypsum plasterboard GB /T 9775-2008 Decorating gypsum board JC/T 799-2007 Test methods for fiber cement products GB/T 7019-1997 10 Water impermeability Test methods for fiber cement products GB/T 7019-1997 11 Volume density 8 Decoration panels 12 Moisture expansion ratio 309 Test methods for fiber cement products GB/T 7019-1997 13 Drying shrinkage ratio 14 Frost resistance 15 Gloss deviation 0309 Paints and varnishes-Determination of specular gloss of non-metallic paint films at 20°、60°and 85°GB/T9754-2007 Test methods of specular gloss for decorative building materials GB/T13891-2008 8 Decoration panels 16 Bending strength 309 Test methods for fiber cement products GB/T 7019-1997 Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels GB/T17657-1999 Aluminium-plastic composite panel GB/T17748-2008 Aluminium-plastic composite panel for ordinary decoration GB/T 22412-2008 17 Elastic module in bending Aluminium-plastic composite panel for curtain wall GB/T 17748-2008 18 Planar density Gypsum plasterboard GB /T 9775-2008 19 Shearing strength Aluminium-plastic composite panel GB/T17748-2008 20 Transfixion resistance 8 Decoration panels 21 Flexibility of coating 309 Aluminium-plastic composite panel for curtain wall GB/T 17748-2008 Aluminium-plastic composite panel for ordinary decoration GB/T22412-2008 22 Boiling water resistance 23 Alkali resistance Aluminium-plastic composite panel for curtain wall GB/T 17748-2008 Aluminium-plastic composite panel for ordinary decoration GB/T22412-2008 Metal and metal-composite ceilings GB/T 23444-2009 24 Oil resistance 0309 Metal and metal-composite ceilings JC/T 1059-2007 8 Decoration panels 25 Acid resistance 309 Aluminium-plastic composite panel for curtain wall GB/T 17748-2008 Aluminium-plastic composite panel for ordinary decoration GB/T22412-2008 Aluminium panels for building decoration GB/T23443-2009 Metal and metal-composite ceilings GB/T 23444-2009 Metal and metal-composite ceilings JC/T 1059-2007 26 Moisture deflection Decorating gypsum board JC/T 799-2007 Mineral wool decorating and acoustic ecilings JC/T670-2005 27 Pencil rigidity Paints and varnishes— Determination of film hardness by pencil test GB/T6739-2006 28 Hardness of paint film 8 Decoration panels 29 Adhesion of coating 309 Method of test for adhesion of paint films GB1720-1979 Paints and varnishes-Cross cut test for films GB/T9286-1998 30 Impact resistance Determination of impact resistance of film GB/T1732-1993 31 Stain resistance Test method for dirt pickup resistance of film of architectural coatings and paints GB/T9780-2005 32 Thermal deformation temperature Plastics-Determination of temperature of deflection under load-Part 1:General test method GB/T1634.1-2004 33 Peel strength/Peel force 0309 Adhesives, 180°peel strength test method for a flexible-bonded-to-rigid test specimen assembly GB/T2790-1995 Aluminium-plastic composite panel GB/T17748-2008 34 Dehylogenation resistance Glass fiber & magnesium cement board JC 688-2006 8 Decoration panels 35 Solvent resistance 309 Aluminium-plastic composite panel for curtain wall GB/T 17748-2008 Aluminium-plastic composite panel for ordinary decoration GB/T22412-2008 Aluminium panels for building decoration GB/T 23443-2009 9 Glass-ceramics for building decoration 1 Appearance 0310 Glass-ceramics for building decoration JC/T 872-2000 2 Dimension 3 Deviation of flatness 4 Deviation of angle 5 Bending strength 6 Acid resistance 7 Alkali resistance 8 Resistance to quick cooling and heating 9 Gloss deviation Test methods of specular gloss for decorative building materials GB/T13891-2008 10 Paint 1 State in container 0215 Zinc Rich Primer HG/T 3668-2009 Red-Lead Alkyd Anticorrosive Paint HG/T 3346-1999 Paints for steel structure bridge HG/T 3656-1999 Crosslinking fluorocarbon resin coatings HG/T3792-2005 Floor coating HG/T3829-2006 Anticorrosive coatings for buildings steel structure JG/T224-2007 10 Paint 2 Paint film appearance 215 Zinc Rich Primer HG/T 3668-2009 Varous colour pHenolic anticorrosive paint HG/T 3345-1999 Red-Lead Alkyd Anticorrosive Paint HG/T 3346-1999 Paints for steel structure bridge HG/T 3656-1999 Crosslinking fluorocarbon resin coatings HG/T3792-2005 Anticorrosive coatings for buildings steel structure JG/T224-2007 3 Fineness 10 Paint 4 Bending resistance/ Flexibility 215 Determination of flexibility of films GB/T1731-1993 Paints for steel structure bridge HG/T 3656-1999 Red-Lead Alkyd Anticorrosive Paint HG/T 3346-1999 Anticorrosive coatings for buildings steel structure JG/T224-2007 5 Impact resistance Paints for steel structure bridge HG/T 3656-1999 Zinc Rich Primer HG/T 3668-2009 Varous colour pHenolic anticorrosive paint HG/T 3345-1999 Crosslinking fluorocarbon resin coatings HG/T3792-2005 Floor coating HG/T3829-2006 Anticorrosive coatings for buildings steel structure JG/T224-2007 10 Paint 6 Drying time 215 Paints for steel structure bridge HG/T 3656-1999 Zinc Rich Primer HG/T 3668-2000 Varous colour pHenolic anticorrosive paint HG/T 3345-1999 Red-Lead Alkyd Anticorrosive Paint HG/T 3346-1999 Crosslinking fluorocarbon resin coatings HG/T3792-2005 Floor coating HG/T3829-2006 Anticorrosive coatings for buildings steel structure JG/T224-2007 10 Paint 7 Water resistance 215 Paints for steel structure bridge HG/T 3656-1999 Crosslinking fluorocarbon resin coatings HG/T3792-2005 Floor coating HG/T3829-2006 Anticorrosive coatings for buildings steel structure JG/T224-2007 8 Adhesion of coating Method of test for adhesion of paint films GB/T 1720-197 Paints for steel structure bridge HG/T 3656-1999 Crosslinking fluorocarbon resin coatings HG/T3792-2005 Floor coating HG/T3829-2006 Anticorrosive coatings for buildings steel structure JG/T224-2007 10 Paint 9 Salt water resistance 215 Paints for steel structure bridge HG/T 3656-1999 Varous colour pHenolic anticorrosive paint HG/T 3345-1999 Red-Lead Alkyd Anticorrosive Paint HG/T 3346-1999 Floor coating HG/T3829-2006 Anticorrosive coatings for buildings steel structure JG/T224-2007 10 Workability/brushability Paints for steel structure bridge HG/T 3656-1999 Zinc Rich Primer HG/T 3668-2009 Red-Lead Alkyd Anticorrosive Paint HG/T 3346-1999 Anticorrosive coatings for buildings steel structure JG/T224-2007 10 Paint 11 Solid content/involatile content 215 Red-Lead Alkyd Anticorrosive Paint HG/T 3346-1999 Crosslinking fluorocarbon resin coatings HG/T3792-2005 Floor coating HG/T3829-2006 11 Harmful substance 1 Formaldehyde 0244 Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels GB/T17657-1999 Indoor decorating and refurbishing materials--Limit of formal dehyde emission of wood based panels and finishing products GB 18580-2001 Indoor decorating and refurbishing materials-Limit of harmful substances of interior architectural coatings GB18582-2008 11 Harmful substance 1 Formaldehyde 244 Indoor decorating and refurbishing materials-Limit of harmful substances of adhesives GB18583-2008 Indoor decorating and refurbishing materials--Limit of harmful substances of wood based furniture GB18584-2001 Indoor decorating and refurbishing materials--Limit of harmful substances of wallpapers GB18585-2001 Indoor decorating and refurbishing materials--Limitations of harmful substances emitted from carpets,carpet cushions and adhesives GB18587-2001 Code for indoor environmental pollution control of civil building engineering GB50325-2010 Determination of formaldehyde content of waterborne coatings - SpectropHtometric method with acetylacetone GB/T 23993-2009 Limit of harmful substances of building waterproof coatings JC 1066-2008 Limit of harmful substances of exterior wall coatings GB 24408-2009 Indoor decorating and refurbishing materials - Limit of harmful substances of water based woodenware coatings GB 24410-2009 11 Harmful substance 2 Volatile organic compounds 0244 Indoor decorating and refurbishing materials--Limit of harmful substances of solvent coatings for woodenware GB18581-2009 Indoor decorating and refurbishing materials-Limit of harmful substances of interior architectural coatings GB18582-2008 Indoor decorating and refurbishing materials--Limit of harmful substances of polyvinyl chloride floor coverings GB18586-2001 Limit of harmful substances of exterior wall coatings GB 24408-2009 Indoor decorating and refurbishing materials - Limit of harmful substances of water based woodenware coatings GB 24410-2009 Code for indoor environmental pollution control of civil building engineering GB50325-2010 Limit of harmful substances of building waterproof coatings JC 1066-2008 11 Harmful substance 3 Total volatile organic compounds 244 Indoor decorating and refurbishing materials-Limit of harmful substances of adhesives GB18583-2008 Indoor decorating and refurbishing materials--Limitations of harmful substances emitted from carpets,carpet cushions and adhesives GB18587-2001 Code for indoor environmental pollution control of civil building engineering GB50325-2010 11 Harmful substance 4 Benzene 0244 ???? Indoor decorating and refurbishing materials--Limit of harmful substances of solvent coatings for woodenware GB18581-2009 Indoor decorating and refurbishing materials-Limit of harmful substances of adhesives GB18583-2008 Limit of harmful substances of exterior wall coatings GB 24408-2009 Limit of harmful substances of building waterproof coatings JC 1066-2008 Code for indoor environmental pollution control of civil building engineering GB50325-2010 11 Harmful substance 5 Total of toluene and xylene 244 Indoor decorating and refurbishing materials--Limit of harmful substances of solvent coatings for woodenware GB18581-2009 Limit of harmful substances of building waterproof coatings JC 1066-2008 Limit of harmful substances of exterior wall coatings GB 24408-2009 Code for indoor environmental pollution control of civil building engineering GB50325-2010 11 Harmful substance 6 Total amount of benzene, toluene, ethyl benzene, and xylene 244 Indoor decorating and refurbishing materials-Limit of harmful substances of interior architectural coatings GB18582-2008 Indoor decorating and refurbishing materials - Limit of harmful substances of water based woodenware coatings GB 24410-2009 Limit of harmful substances of building waterproof coatings JC 1066-2008 7 Total of toluene and xylene 0244 Indoor decorating and refurbishing materials-Limit of harmful substances of adhesives GB18583-2008 Code for indoor environmental pollution control of civil building engineering GB50325-2010 11 Harmful substance 8 TDI((tolylene diisocyanate) 244 Binders for paints and varnishes - Determination of monomeric diisocyanates in isocyanate resins GB18446-2009 Indoor decorating and refurbishing materials-Limit of harmful substances of adhesives GB18583-2008 9 Chloroethylene Indoor decorating and refurbishing materials--Limit of harmful substances of polyvinyl chloride floor coverings GB18586-2001 10 Styrene Indoor decorating and refurbishing materials— Limitations of harmful substances emitted from carpets,carpet cushions and adhesives GB18587-2001 11 4-PHenylcyclo- hexene 11 Harmful substance 12 BHT-butylated hydroxytoluene 244 Indoor decorating and refurbishing materials— Limitations of harmful substances emitted from carpets,carpet cushions and adhesives GB18587-2001 13 2-ethyl-1-hexanol 14 Internal exposure index Limit of radionuclides in building materials GB6566-2010 15 External exposure index 16 Ammonia Limit of ammonia emitted from the concrete admixtures GB18588-2001 12 Harmful substances ofsoil 1 Soil Radon 222Rn 0244 Code for indoor environmental pollution control of civil building engineering GB50325-2010 2 Radon 222Rn exhalation rate from surface 13 Anti-static raised floor 1 Size 0309 General specification for raised access floors for electrostatic protection SJ/T 10796-2001 2 Appearance 3 electrolytic Activities of the raised floor 4 Loading test Concentrated load limit and Ultimate concentrated load 5 The impact resistance 6 The support of the permit use of load Ⅶ Waterproof material 1 Waterproof sheet 1 Tensile strength/pull force 0211 0323 Test methods for building sheets for waterproofing —Part 8:Bitumen sheets for waterproofing-tensile properties GB/T328.8-2007 Rubber, vulcanized or thermoplastic--Determination of tensile stress-strain properties GB/T528-2009 Styrene butadiene styrene(SBS) modified bituminous sheet materials GB18242-2008 Atactic polypropylene (APP)modified bituminous sheet materials GB 18243-2008 Polyvinyl chloride plastic sheets for waterproofing GB12952-2003 Chlorinated polyethylene plastic sheets for waterproofing GB 12953-2003 1 Waterproof sheet 2 Elongation/Elongation at break 0211 0323 Test methods for building sheets for waterproofing —Part 8:Bitumen sheets for waterproofing-tensile properties GB/T328.8-2007 Rubber, vulcanized or thermoplastic--Determination of tensile stress-strain properties GB/T528-2009 Styrene butadiene styrene(SBS) modified bituminous sheet materials GB18242-2008 Atactic polypropylene (APP)modified bituminous sheet materials GB 18243-2008 Polyvinyl chloride plastic sheets for waterproofing GB12952-2003 Chlorinated polyethylene plastic sheets for waterproofing GB 12953-2003 1 Waterproof sheet 3 Flexibility/flexibility atlow temperature 0211 0323 Test methods for building sheets for waterproofing— Part 14:Bitumen sheets for waterproofing-flexibility at low temperature GB/T328.14-2007 Polyvinyl chloride plastic sheets for waterproofing GB12952-2003 Chlorinated polyethylene plastic sheets for waterproofing GB 12953-2003 Self-adhering polymer modified bituminous waterproof sheet GB 23441-2009 Styrene butadiene styrene(SBS) modified bituminous sheet materials GB18242-2008 1 Waterproof sheet 4 Water impermeability 0211 0323 Test methods for building sheets for waterproofing— Part 10:Bitumen,plastic and rubber sheets for water- proofing-watertightness GB/T328.10-2007 Polymer water-proof materials —Part 1:Water-proof sheet GB 18173.1-2006 5 Heat resistance Test methods for building sheets for waterproofing— Part 11:Bitumen sheets for waterproofing-flow resist- ance at elevated temperature GB/T328.11-2007 1 Waterproof sheet 6 Tear strength 0211 0323 Test methods for building sheets for waterproofing— Part 18:Bitumen sheets for waterproofing-resistnace to tearing(nail shank) GB/T328.18-2007 Rubber,vulcanized or thermoplastic--Determination of tensile stress-strain properties GB/T528-2009 Rubber, vulcanized or thermoplastic--Determination of tear strength (Trouser, angle and crescent test pieces) GB/T529-2008 1 Waterproof sheet 7 Dimensional stability / Change in dimensions on heating 0211 0323 Test methods for building sheets for waterproofing—Part 12:Bitumen sheets for waterproofing-dimensional stability GB/T328.12-2007 Polyvinyl chloride plastic sheets for waterproofing GB12952-2003 Chlorinated polyethylene plastic sheets for waterproofing GB 12953-2003 Polymer water-proof materials—Part 1:Water-proof sheet GB 18173.1-2006 8 Accelerated weathering ageing Test methods for resistance to weathering of building water proofing materials GB/T18244-2000 1 Waterproof sheet 9 Peel strength 0211 0323 Test methods for building sheets for waterproofing—Part 20:Bitumen sheets for waterproofing-resistance to peeling of joints GB/T328.20-2007 Self-adhering polymer modified bituminous waterproof sheet GB 23441-2009 Rubber,vulcanized or thermoplastic--Determination of adhesion to textile fabric GB/T532-2008 Polymer water-proof materials—Part 1:Water-proof sheet GB 18173.1-2006 10 Anti-perforation property Polyvinyl chloride plastic sheets for waterproofing GB12952-2003 Chlorinated polyethylene plastic sheets for waterproofing GB 12953-2003 1 Waterproof sheet 11 Shear property 0211 0323 Test methods for building sheets for waterproofing—Part 22:Bitumen sheets for waterproofing-resistance to shearing of joints GB/T328.22-2007 Polyvinyl chloride plastic sheets for waterproofing GB12952-2003 Self adhesive rubber-aspHalted membranes for waterproofing JC840-1999 12 Adhesive property on shear force Polymer water-proof materials—Part 1:Water-proof sheet GB 18173.1-2006 1 Waterproof sheet 13 Thickness of pitchy 0211 0323 Modified bituminous waterproofing sheets for concrete bridge decks and other concrete surfaces trafficable by vehicles JC/T974-2005 Styrene butadiene styrene(SBS) modified bituminous sheet materials GB18242-2008 Atactic polypropylene (APP)modified bituminous sheet materials GB 18243-2008 1 Waterproof sheet 14 Soluble matter content 0211 0323 Test methods for building sheets for waterproofing—Part 26:Bitumen sheets for waterproofing-dissouble composite of membrane(impregnated and coated aspHalt amount) GB/T328.26-2007 Modified bituminous waterproofing sheets for concrete bridge decks and other concrete surfaces trafficable by vehicles JC/T974-2005 15 Alkali resistance Modified bituminous waterproofing sheets for concrete bridge decks and other concrete surfaces trafficable by vehicles JC/T974-2005 1 Waterproof sheet 16 Heat aging 0211 0323 Modified bituminous waterproofing sheets for concrete bridge decks and other concrete surfaces trafficable by vehicles JC/T974-2005 Styrene butadiene styrene(SBS) modified bituminous sheet materials GB18242-2008 Atactic polypropylene (APP)modified bituminous sheet materials GB 18243-2008 17 nail water tightness Self-adhering polymer modified bituminous waterproof sheet GB 23441-2009 18 Filter oil filter capability Self-adhering polymer modified bituminous waterproof sheet GB 23441-2009 Pre-applied and wet installed waterproof sheets GB/T 23457-2009 1 Waterproof sheet 19 Holding power 0211 0323 Self-adhering polymer modified bituminous waterproof sheet GB 23441-2009 Pre-applied and wet installed waterproof sheets GB/T 23457-2009 20 Thermal aging 21 Thermal stability 22 Tear strength Pre-applied and wet installed waterproof sheets GB/T 23457-2009 2 Waterproof coating 1 Tensile strength 0323 0211 Test methods for building waterproof coatings GB/T16777-2008 Polymer emulsion architectural waterproof coating JC/T864-2008 Polyurethane waterproofing coating GB/T19250-2003 Waterproofing coating for concrete bridge and road surface JC/T975-2005 Polymer modified cementitious waterproofing coating GB/T 23445-2009 2 Elongation at break 3 Water impermeability 4 Flexibility/flexibility at low temperature 2 Waterproof coating 5 Solid content 0323 0211 Test methods for building waterproof coatings GB/T16777-2008 Polyurethane waterproofing coating GB/T19250-2003 Waterproofing coating for concrete bridge and road surface JC/T975-2005 Polymer modified cementitious waterproofing coating GB/T 23445-2009 6 Drying time(surface dry-time,real dry-time) Test methods for building waterproof coatings GB/T16777-2008 Polyurethane waterproofing coating GB/T19250-2003 Waterproofing coating for concrete bridge and road surface JC/T975-2005 2 Waterproof coating 7 Flex after heating 0323 0211 Test methods for building waterproof coatings GB/T16777-2008 Polyurethane waterproofing coating GB/T19250-2003 8 Aging at stretching Polyurethane waterproofing coating GB/T19250-2003 9 Adhesion strength Test methods for building waterproof coatings GB/T16777-2008 Polyurethane waterproofing coating GB/T19250-2003 Waterproofing coating for concrete bridge and road surface JC/T975-2005 Polymer modified cementitious waterproofing coating GB/T 23445-2009 10 Permeability resistance Polymer modified cementitious waterproofing coating GB/T 23445-2009 2 Waterproof coating 11 Heat resistance 0323 0211 Waterproofing coating for concrete bridge and road surface JC/T975-2005 Emulsified aspHalt waterproof coating JC408-2005 12 Cracking resistance Solvent for rubber aspHalt water-resistant coating JC/T 852-1999 13 Salt treatment Waterproofing coating for concrete bridge and road surface JC/T975-2005 14 Acid and alkali treatment Test methods for building waterproof coatings GB/T16777-2008 Polymer emulsion architectural waterproof coating JC/T864-2008 Polyurethane waterproofing coating GB/T19250-2003 Emulsified aspHalt waterproof coating JC408-2005 2 Waterproof coating 15 Ultraviolet radiation treatment 0323 0211 Test methods for building waterproof coatings GB/T16777-2008 Emulsified aspHalt waterproof coating JC408-2005 16 Heat aging Waterproofing coating for concrete bridge and road surface JC/T975-2005 Test methods for building waterproof coatings GB/T16777-2008 Emulsified aspHalt waterproof coating JC408-2005 3 Rigid waterproof-ing materials 1 Setting time 0323 Test methods for water requirement of normal consistency,setting time and soundness of the portland cements GB/T1346-2001 2 Soundness 3 Compressive strength Method of testing cements- -Determination of strength GB/T17671-1999 4 Bending strength 3 Rigid waterproof-ing materials 5 Cohesive strength 323 Inorganic waterproof and leakage-preventing materials GB 23440-2009 6 Permeability pressure Water-repellent admixture for mortar and concrete JC 474-2008 7 Heat resistance Inorganic waterproof and leakage-preventing materials GB 23440-2009 8 Freeze-thaw resistance Testing methods for long-term and long-lasting performance of ordinary concrete GB/T 50082-2009 9 Water content Methods for testing uniformity of concrete admixture GB/T8077-2000 10 Chloride content 11 Fineness 12 Total alkali content Concrete admixtures GB8076-2008 13 Water reducing ratio 14 Bleeding rate 15 Air content 3 Rigid waterproof-ing materials 16 shrinkage 323 Concrete admixtures GB8076-2008 17 Steel corrosion 4 Water-repellent admixture 1 Appearance 0318 Water-soluble infiltrative inorganic water-repellent admixture JC/T 1018-2006 Silicone hydropHobic agent for construction surfaces JC/T902-2002 2 pH value Methods for testing uniformity of concrete admixture GB/T8077-2000 3 Water absorption Silicone hydropHobic agent for construction surfaces JC/T902-2002 4 Penetrating capacity(after standard state,low temperature treat,ultraviolet treat,acid treat,alkali treat) 4 Water-repellent admixture 5 Viscosity 318 Determination of viscosity of coatings GB1723-1993 6 Gel time Water-soluble infiltrative inorganic water-repellent admixture JC/T 1018-2006 7 Permeability resistance 8 Stability 5 Protective agent 1 Waterproof performance 0318 Natural stone protector for building decoration JC/T973-2005 2 Stain resistance 3 Acid resistance 4 Alkali resistance 5 Accelerated aging Ⅷ Joint sealing material 1 Joint sealing material 1 Apparaennce 0223 Jointing sealants for concrete JC/T 881-2001 Sealants for joint Glass Curtain Wall JC/T 882-2001 Sealants for stone GB/T 23261-2009 Structural silicon sealants for building GB 16776-2005 Silicone sealant for building GB/T 14683-2003 2 Density Test method for building sealants Part 2:Determination of density GB/T13477.2-2002 3 Tack-free time Test method for building sealants Part 5:Determination for tack-free time GB/T13477.5-2002 4 Flow/slump Test method for building sealants Part 6:Determination of flow GB/T 13477.6-2002 5 Tensile bond strength/tensile modulus Test method for building sealants Part 8:Determination of tensile properties GB/T13477.8-2002 1 Joint sealing material 6 Elongation at break 223 Test method for building sealants Part 8:Determination of tensile properties GB/T13477.8-2002 7 Tensile bond strength/tensile modulus after soggy Test method for building sealants Part 9:Determination of adhesion/cohesion properties after immersion in water GB/T13477.9-2002 8 Elongation at break after soggy 9 Tensile properties at maintained extention Test method for building sealants Part 10:Determination of tensile properties at maintained extension GB/T13477.10-2002 10 Tensile properties at maintained extention after soggy Test method for building sealants Part 11:Determination of adhesion/cohesion properties at maintained extension after immersion in water GB/T 13477.11-2002 1 Joint sealing material 11 Determination of adhesion/cohesion properties at constant temperature 223 Test method for building sealants Part 12:Determination of adhesion/cohesion properties at constant temperature GB/T 13477.12-2002 12 Adhesion properties after cold-tensile and hot-compress Test method for building sealatns part 13:Deter- mination of adhesion/cohesion properties at variable temperatures GB/T13477.13-2002 13 Determination of resistance to prolonged exposure to water Test method for building sealants Part 14:Determination of resistance to prolonged exposure to water GB/T 13477.14-2002 14 Elastic recovery Test method for building sealants Part 17:Deter- mination of elastic recovery GB/T13477.17-2002 1 Joint sealing material 15 Adhesion-in-peel 223 Test method for building sealants part 18:Deter- mination of adhesion-in-peel GB/T 13477.18-2002 16 Change in massand volume Test method for building sealants Part 19:Determination of change in mass and volume GB/T 13477.19-2002 17 Staining Test method for building sealants Part 20:Deter- mination of staining GB/T 13477.20-2002 18 Ultraviolet radiation treatment Building sealants for stone GB/T 23261-2009 Sealants for prepainted steel sheetn JC/T 884-2001 19 Shore hardness Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1:Duromerer method (Shore hardness) GB/T 531.1-2008 2 Waterstop 1 Shore hardness 0223 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1:Duromerer method (Shore hardness GB/T 531.1-2008 2 Tensile strength Rubber, vulcanized or thermoplastic--Determination of tensile stress-strain properties GB/T528-2009 3 Elongation at break 4 Tearing strength Rubber, vulcanized or thermoplastic--Determination of tear strength (Trouser, angle and crescent test pieces GB/T529-2008 5 Compressions set Rubber, Vulcanized or thermoplastic--Determination of compression set at ambient elevated or low temperatures GB/T7759-1996 2 Waterstop 6 Thermal air aging property 223 Rubber,vulcanized or thermoplastic--Accelerated ageing and heat resistance tests-Air-oven method GB/T3512-2001 7 Sticking together strength of rubber to metal Polymer water-proof materials Part 2:Waterstop GB 18173.2-2000 8 Density Rubber,vulcanized or thermoplastic - Determination of density GB/T 533-2008 9 Apperance Water-swellable waterstopa band from bentonite and rubber JG/T 141-2001 10 Dimension 11 Anti-water pressure 12 Expand rate 13 Heat resistance 14 Test at low temperature 15 Water resistance Ⅸ Adhesive 1 Adhesive 1 Open assembly time 0223 Adhesives for ceramic wall and floor tiles JC/T547-2005 2 Adhesion properties after soaking 3 Adhesion properties after heating 4 Temperature variation properties 5 Tensile strength (standard condition,hot treat,freeze-thaw cycle) 6 Solid content/ Nonvolatile content Test method for nonvolatile content of adhesives GB/T2793-1995 Testing methods for construction adhesives - Part 1: Test methods for ceramic tiles adhesives GB/T 12954.1-2008 1 Adhesive 7 Tensile strength 223 Test methods for properties of resin casting boby GB/T 2567-2008 8 Elastic module (in bending、tension) 9 Percentage elongation 10 Pot life Testing methods for construction adhesives - Part 1: Test methods for ceramic tiles adhesives GB/T 12954.1-2008 1 Adhesive 11 Tensile shear strength 223 Adhesives - Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies GB/T 7124-2008 Technical specification for strengthening concrete structures with carbon fiber reinforced polymer laminate CECS 146:2003(2007) Design code for strengthening concrete structure GB50367-2006 1 Adhesive 12 Adhesion strength under tensile stress 223 Adhesives--Determination of tensile strength of butt joints GB/T 6329-1996 Testing Standard of Adhesive Strength of tapestry brick for construction engineering JGJ 110-2008 Technical specification for strengthening concrete structures with carbon fiber reinforced polymer laminate CECS 146:2003(2007) Design code for strengthening concrete structure GB50367-2006 1 Adhesive 13 Compressive strength 223 Technical specification for strengthening concrete structures with carbon fiber reinforced polymer laminate CECS 146:2003(2007) Resin for strengthening and restoring structures with fiber laminate JG/T166-2004 Test methods for properties of resin casting boby GB/T 2567-2008 1 Adhesive 14 Bending strength 223 Technical specification for strengthening concrete structures with carbon fiber reinforced polymer laminate CECS 146:2003(2007) Resin for strengthening and restoring structures with fiber laminate JG/T166-2004 Test methods for properties of resin casting boby GB/T 2567-2008 Design code for strengthening concrete structure GB50367-2006 15 Gel time Resin for strengthening and restoring structures with fiber laminate JG/T166-2004 Determination of gelation time of epoxide resins GB/T 12007.7-1989 1 Adhesive 16 Thermal deformation temperature 223 Plastics-Determination of temperature of deflection under load-Part 1:General test method GB/T 1634.1-2004 17 Butt joint tensile strength Adhesives--Determination of tensile strength of butt joints GB/T 6329-1996 18 Tensile strength Design code for strengthening concrete structure GB50367-2006 19 Viscosity Determination methods for viscosity of adhesives GB/T 2794-1995 Limited rotation viscosity agent 20 Density Test method for density of adhesives in fluid form—Method of weight cup GB/T 13354-1992 Ⅹ Pipe materials 1 Pipes for water supply, drainage and Sewerage 1 Appearance 0315 Unplasticized poly (vinyl chloride)(PVC-U)pipes for soil and waste discharge inside buildings GB/T5836.1-2006 Unplatiscized poly (vinyl chloride)(PVC-U) pipes for water supply GB/T10002.1-2006 Polyethylene pipes for water supply GB/T13663-2000 Unplasticized polyvinyl chloride (PVC-U) pipes with a cellular core for drainage GB/T16800-2008 Unplasticized polyvinyl chloride(PVC-U)structure wall pipline system for underground soil waste and drainage—Part 1:Double wall corrugated pipes GB/T 18477.1-2007 Polypropylene piping systems for hot and cold water installation-Part 2:Pipes GB/T 18742.2-2002 Polyethylene structure wall pipeline system for underground usage Part 1:Polyethylene double wall corrugated pipes GB/T19472.1-2004 Polyethylene structure-wall piping system for underground usage part 2:Polyethylene spirally enwound structure-wall pipes GB/T 19472.2-2004 1 Pipes for water supply, drainage and Sewerage 1 Appearance 315 Unplasticized poly(vinyl chloride)(PVC-U)pipes for non-pressure buried drainage and sewerage systems GB/T20221-2006 Glass fiber reinforced plastics mortar pipes GB/T 21238-2007 Polyethylene(PE) composite pipes with porous steel strip for water supply CJ/T181-2003 Steel wire reinforced thermoplastics (PE) composite pipe and fitting CJ/T 189-2007 2 Dimension Plastics piping systems - Plastics components - Determination of dimensions GB/T 8806-2008 Glass fiber reinforced plastics mortar pipes GB/T 21238-2007 1 Pipes for water supply, drainage and Sewerage 3 Tensile strength 315 Thermoplastic pipes- Determination of tensile properties-Part 2:Pipes made of unplasticized poly(vinyl chloride)(PVC-U), chlorinated poly(vinyl chloride)(PVC-C) and high-impact poly(vinyl chloride)(PVC-HI) GB/T8804.2-2003 4 Percentage elongation at fracture Thermoplastic pipes- Determination of tensile properties-Part 3:Polyolefin pipes GB/T 8804.3-2003 5 Lognitudinal reversion Thermoplastics pipes- Determination of longitudinal reversion GB/T6671-2001 1 Pipes for water supply, drainage and Sewerage 6 Drop hammer impact/impact strength 315 Thermoplastics pipes- Determination of resistance to external blows-Round -the-clock method GB/T14152-2001 The polyethylene spirally enwound structure-wall pipes and the polyethylene double wall corrugated pipes can not be tested when the nominal diameters are 500mm;the other pipes also can not be tested when the outside diameters are less than or equal to 400 mm 7 Vicat softening temperature Thermoplastics pipes and fitting-Determination of vicat softening temperature GB/T8802-2001 1 Pipes for water supply, drainage and Sewerage 8 Imtransparency 315 Unplatiscized poly (vinyl chloride)(PVC-U) pipes for water supply GB/T10002.1-2006 Polypropylene piping s ystems for hot and cold water installation-Part 2:Pipes GB/T 18742.2-2002 9 Density Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method GB/T 1033.1-2008 10 Resistance to Hydrostatic pressure Thermoplastics pipes for the conveyance of fluids- Resistance to internal pressure-Test method GB/T6111-2003 11 Curvature Determination of deflection for rigid plastic pipes QB/T 2803-2006 1 Pipes for water supply, drainage and Sewerage 12 Ring stiffness 315 Thermoplastics pipes- Determination of ring stiffness GB/T 9647-2003 Unplasticized polyvinyl chloride (PVC-U) pipes with a cellular core for drainage GB/T16800-2008 Polyethylene structure-wall piping system for underground usage part 2:Polyethylene spirally enwound structure-wall pipes GB/T 19472.2-2004 Glass fiber reinforced plastics mortar pipes GB/T 21238-2007 The pipes can be tested only when the outside diameters are less than or equal to 1000 mm 1 Pipes for water supply, drainage and Sewerage 13 Ring stiffness 315 Thermoplastics pipes- Determination of ring stiffness GB/T 9647-2003 Unplasticized polyvinyl chloride(PVC-U)structure wall pipline system for underground soil waste and drainage—Part 1:Double wall corrugated pipes GB/T 18477.1-2007 Polyethylene structure wall pipeline system for underground usage Part 1:Polyethylene double wall corrugated pipes GB/T19472.1-2004 Polyethylene structure-wall piping system for underground usage part 2:Polyethylene spirally enwound structure-wall pipes GB/T 19472.2-2004 The pipes can be tested only when the outside diameters are less than or equal to 1000 mm 1 Pipes for water supply, drainage and Sewerage 14 Bursting test/ Bursting strength test 315 Standard test method for short-time hydraulic failure and resistance to constant internal pressure of the plastics pipes for the transport of fluids GB/T 15560-1995 15 Cracking stability under condition of compression Steel wire reinforced thermoplastics (PE) composite pipe and fitting CJ/T 189-2007 1 Pipes for water supply, drainage and Sewerage 16 Film oven test 315 Polyethylene structure wall pipeline system for underground usage Part 1:Polyethylene double wall corrugated pipes GB/T19472.1-2004 Polyethylene structure-wall piping system for underground usage part 2: Polyethylene spirally enwound structure-wall pipes GB/T 19472.2-2004 Unplasticized polyvinyl chloride(PVC-U)structure wall pipline system for underground soil waste and drainage—Part 1:Double wall corrugated pipes GB/T 18477.1-2007 1 Pipes for water supply, drainage and Sewerage 17 Flattening test 315 Unplasticized polyvinyl chloride (PVC-U) pipes with a cellular core for drainage and sewerage systems GB/T16800-2008 Polyethylene(PE) composite pipes with porous steel strip for water supply CJ/T 181-2003 Coating plastic steel pipe for water supply CJ/T 120-2008 Technical specification for testing compressive strength of masonry mortar by penetration resistance method JGJ/T136-2007 18 Simply-supported beam impact Thermoplastics pipes for the transport of fluids-Determinaiton of impact by the charpy method GB/T18743-2002 19 Adhesion force Coating plastic steel pipe for water supply CJ/T 120-2008 1 Pipes for water supply, drainage and Sewerage 20 Adhesive strength test 315 Steel pipes of lining plastic for water supply CJ/T136-2007 2 Fittings for water supply, drainage and Sewerage 1 Appearance 0315 Unplasticized poly(vinyl chloride)(PVC-U) fittings for soil and waste inside buildings GB/T 5836.2-2006 Fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply GB/T10002.2-2003 2 Dimension Polypropylene piping systems for hot and cold water installation-Part 3:Fittings GB/T18742.3-2002 3 Vicat softening temperature Thermoplastics pipes and fitting-Determination of vicat softening temperature GB/T8802-2001 2 Fittings for water supply, drainage and Sewerage 4 Film oven test 315 Injection-moulded unplasticized poly(vinyl chloride)(PVC-U), chlorinated poly(vinyl chloride)(PVC-C),acrylonitrile butadiene-styrene(ABS)and acrylonitrile-styrene-acrylester(ASA)fittings Hot oven test method GB/T8803-2001 5 Falling test Test method for unplasticized polyvinyl chloride(PVC-U)fittings by falling GB/T8801-2007 6 Density Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method GB/T 1033.1-2008 2 Fittings for water supply, drainage and Sewerage 7 Resistance to Hydrostatic pressure 315 Fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply GB/T10002.2-2003 Polypropylene piping systems for hot and cold water installation-Part 3:Fittings GB/T18742.3-2002 8 Imtransparency Polypropylene piping systems for hot and cold water installation-Part 3:Fittings GB/T18742.3-2002 3 Ventilating duct for residential kitchen and bathroom 1 Appearance 0323 Ventilating duct for residential kitchen and bathroom JG/T 194-2006 2 Dimension 3 Loading test 4 Glassfiber reinforced cement duct forventilation 1 Appearance 315.2 Glassfiber reinforced cement duct for ventilation JC/T 854-2008 2 Dimension 3 Density 4 Water absorption 4 Glassfiber reinforced cement duct forventilation 5 Impact propertues 315.2 Glassfiber reinforced cement duct for ventilation JC/T 854-2008 6 Loading test 7 Bending strength 5 Welded steel pipe for low pressure liquid delively 1 Tensile strength 0329 Metallic materials - Tensile testing - Part 1 : Method of test at room temperature GB/T228.1-2010 2 Flattening test Metal materials-Tube -Flattening test GB/T246-2007 3 Bending test Metallic materials—Tube --Bend test GB/T244-2008 4 Zn-coat thickness Welded steel pipe for low pressure liquid delively GB/T3091-2008 5 Zn-coat uniformity 6 Thickness 7 Dimension 6 Plain carbon steel pipes for electric wire 1 Bending 0339 Welded steel pipes for low pressure liquid delivery GB/T244-2008 6 Plain carbon steel pipes for electric wire 2 Uinformity of Zn-coat 339 Carbon structural steel pipes for electric wire YB/T 5305-2008 3 Zn-coat thickness 4 Dimension Particular specifications for metal conduits for electrical installations GB/T 14823.1-1993 5 Compressive 7 Electrical Insulation Pipes for electric wire in constructions 1 Appearance 0315 Electrical Insulation pipes for electric wire in constructions JG 3050-1998 2 Dimension 3 Compression performance 4 impact property 5 Bending property 6 Flattening property 7 Droping property 8 Heat resistance 9 Self-quench time 7 Electrical Insulation Pipes for electric wire in constructions 10 Oxygen exponent 315 Electrical Insulation pipes for electric wire in constructions JG 3050-1998 11 Electrical property 8 Pipes for electric wire 1 Appearance 0315 Buried multi-hole plastics pipes for communication Part 1:Unplasticsized polyvinyl chloride(PVC-U) multi-hole pipes QB/T 2667.1-2004 Buried chlorinated polyvinyl chloride (PVC-C) pipes for high-tension power cable QB/T 2479-2005 Plastic Pipes for underground Communication pipeline Part 1: General YD/T 841.1-2008 Technical requirements for electric cable conduits Part 1: General DL/T 802.1-2007 2 Dimension 8 Pipes for electric wire 3 Curvature 315 Determination of deflection for rigid plastic pipes QB/T 2803-2006 4 Tensile strength Thermoplastic pipes-Determination of tensile properties-Part 2:Pipes made of unplasticized poly(vinyl chloride) (PVC-U),chlorinated poly(vinyl chloride)(PVC-C) and high-impact poly(vinyl chloride)(PVC-HI) GB/T8804.2-2003 Thermoplastic pipes- Determination of tensile properties-Part 3:Polyolefin pipes GB/T 8804.3-2003 Fiber-reinforced plastics composites—Determination of tensile properties GB/T 1447-2005 8 Pipes for electric wire 5 Elongation at break 315 Thermoplastic pipes- Determination of tensile properties-Part 3:Polyolefin pipes GB/T 8804.3-2003 6 Lognitudinal reversion Thermoplastics pipes-Determination of longitudinal reversion GB/T6671-2001 7 Vicat softening temperature Thermoplastics pipes and fitting-Determination of vicat softening temperature GB/T8802-2001 8 Pipes for electric wire 8 Drop hammer impact 315 Buried multi-hole plastics pipes for communication Part 1:Unplasticsized polyvinyl chloride(PVC-U) multi-hole pipes QB/T 2667.1-2004 Plastic Pipe for Buried Communication Conduit Part 2:Solid-Wall Pipe YD/T 841.2-2008 Plastic Pipe for Buried Communication Conduit Part 3:Double-Wall Corrugated Pipe YD/T 841.3-2008 Plastic Pipe for Buried Communication Conduit Part 5:Plum Blossom Pipe YD/T 841.5-2008 Buried chlorinated polyvinyl chloride (PVC-C) pipes for high-tension power cable QB/T 2479-2005 8 Pipes for electric wire 9 External load resistance 315 Buried multi-hole plastics pipes for communication Part 1:Unplasticsized polyvinyl chloride(PVC-U) multi-hole pipes QB/T 2667.1-2004 10 Heat compression of ring piece Buried chlorinated polyvinyl chloride (PVC-C) pipes for high-tension power cable QB/T 2479-2005 11 Bending strength Fibre-reinforced plastic composites—Determination of flexural properties GB/T 1449-2005 12 Pipe stiffness/ Ring stiffness Technical requirements for electric cable conduits Part 2: Cable conduits of fiberglass reinforced plastics DL/T 802.2-2007 Plastic Pipes for underground Communication pipeline Part 1: General YD/T 841.1-2008 8 Pipes for electric wire 13 Plastics-Determination of temperature of deflection under load 315 Plastics-Determination of temperature of deflection under load-Part 2:Plastids,ebonite and long-fibre-reinforced composites GB/T 1634.2-2004 14 Flattening test Plastic Pipes for underground Communication pipeline Part 1: General YD/T 841.1-2008 15 Drop test Plastic Pipes for underground Communication pipeline Part 1: General YD/T 841.1-2008 9 Metal tubes 1 Hydraulic pressure test 0315 Metal materials- Tube-Hydrostatic pressure test GB/T 241-2007 10 Welded stainless steel tubes for architect-ural decoration 1 Tensile 0301 Welded stainless steel tubes for architectural decoration JG/T 3030-1995 2 Flattening 3 Bending 4 Dimension 11 Steel Pipe 1 Yield strength 0301 Metallic materials - Tensile testing - Part 1 : Method of test at room temperature GB/T228.1-2010 2 Tensile strength 3 Bending Metallic materials— Tube--Bend test GB/T244-2008 4 Flattening Metal materials- Tube-Flattening test GB/T246-2007 12 well lid 1 Appearance 0301 Steel fiber reinforced concrete checking well cover JC889-2001 Cast iron manhole top CJ/T3012-1993 Glass fiber reinforced composite inspection well lid JC/T1009-2006 Manhole cover GB/T 23858-2009 2 Dimension 3 Load capacity Ⅺ Thermal insulation materials & Sound absorption materials 1 Dry-mixedthermal insulating composition for buildingsAnd thermal insulating rendering systems 1 Appearance 1016 Dry-mixed thermal insulating composition for buildings GB/T 20473-2006 2 Dry density 3 Radioactivity Limit of radionuclides in building materials GB6566-2010 4 Compressive strength Test methods for inorganic rigid thermal insulation GB/T5486-2008 External thermal insulating rendering systems made of mortar with mineral binder and using expanded polystyrene granule as aggredate JG 158-2004 5 Frost resistance Dry-mixed thermal insulating composition for buildings GB/T 20473-2006 1 Dry-mixedthermal insulating composition for buildingsAnd thermal insulating rendering systems 6 Soften coefficient 1016 Dry-mixed thermal insulating composition for buildings GB/T 20473-2006 External thermal insulating rendering systems made of mortar with mineral binder and using expanded polystyrene granule as aggredate JG158-2004 1 Dry-mixedthermal insulating composition for buildingsAnd thermal insulating rendering systems 7 Thermal coefficient 1016 Thermal insulation-- Determination of steady-state thermal resistance and related properties--Guarded hot plate apparatus GB/T 10294-2008 Thermal insulation— Determination of steady-state thermal resistance and related properties—Heat flow meter apparatus GB/T 10295-1988 Dry-mixed thermal insulating composition for buildings GB/T 20473-2006 8 Linear shrinkage ratio Testing methods of mortar basic property JGJ/T 70-2009 External thermal insulating rendering systems made of mortar with mineral binder and using expanded polystyrene granule as aggredate JG158-2004 1 Dry-mixedthermal insulating composition for buildingsAnd thermal insulating rendering systems 9 Compression-shearing strength 1016 External thermal insulating rendering systems made of mortar with mineral binder and using expanded polystyrene granule as aggredate JG158-2004 10 Compression-shearing strength after soaking 11 Compression-shearing strength after freezing and thawing 12 Compression-shearing strength after heating 1 Dry-mixedthermal insulating composition for buildingsAnd thermal insulating rendering systems 13 Working time 1016 External thermal insulating rendering systems made of mortar with mineral binder and using expanded polystyrene granule as aggredate JG158-2004 External thermal insulation composite systems based on expanded polystyrene JG149-2003 14 Tensile bond strength 15 Tensile bond strength after soaking 1 Dry-mixedthermal insulating composition for buildingsAnd thermal insulating rendering systems 16 Flexibility 1016 Method of testing cements- -Determination of strength GB/T17671-1999 External thermal insulating rendering systems made of mortar with mineral binder and using expanded polystyrene granule as aggredate JG158-2004 17 Percentage elongation atfracture Test methods for building waterproof coatings GB/T16777-2008 External thermal insulating rendering systems made of mortar with mineral binder and using expanded polystyrene granule as aggredate JG158-2004 1 Dry-mixedthermal insulating composition for buildingsAnd thermal insulating rendering systems 18 Involatile content 1016 External thermal insulating rendering systems made of mortar with mineral binder and using expanded polystyrene granule as aggredate JG158-2004 19 Stability for storage 20 State in container 21 Workability 22 Drying time 23 Wearing capability 24 Water resistance 25 Alkali resistance 26 Flexility 27 Storage stability at low temperature 28 Water permeability 2 Termal insulating panels 1 Dimensional stability / Change in dimensionschanging rate 1016 Test method for dimensional stability of rigid cellular plastics GB/T 8811-2008 Cellular plastics and rubbers--Determination of linear dimensions GB/T6342-1996 Preformed flexible elastomeric cellular thermal insulation GB/T 17794-2008 Moulded polystyrene foam board for thermal insulation GB/T 10801.1-2002 Rigid extruded polystyrene foam board for thermal insulation (XPS) GB/T 10801.2-2002 Spray-applied rigid polyurethane cellular plastics GB/T 20219-2006 External thermal insulation composite systems based on expanded polystyrene JG149-2003 2 Termal insulating panels 2 Appearance 1016 Preformed flexible elastomeric cellular thermal insulation GB/T 17794-2008 Moulded polystyrene foam board for thermal insulation GB/T 10801.1-2002 Rigid extruded polystyrene foam board for thermal insulation (XPS) GB/T 10801.2-2002 3 Density Cellular plastics and rubbers - Determination of apparent density GB/T6343-2009 Preformed flexible elastomeric cellular thermal insulation GB/T 17794-2008 Moulded polystyrene foam board for thermal insulation GB/T 10801.1-2002 External thermal insulation composite systems based on expanded polystyrene JG149-2003 2 Termal insulating panels 4 Water absorption 1016 Determination of water absorption of rigid cellular plastics GB/T8810-2005 Moulded polystyrene foam board for thermal insulation GB/T 10801.1-2002 Rigid extruded polystyrene foam board for thermal insulation (XPS) GB/T 10801.2-2002 Spray polyurethane foam for thermal insulation JC/T998-2006 5 Vacuum water absorption Preformed flexible elastomeric cellular thermal insulation GB/T 17794-2008 2 Termal insulating panels 6 Oxygen exponent 1016 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test GB/T 2406.2-2009 Moulded polystyrene foam board for thermal insulation GB/T 10801.1-2002 Spray polyurethane foam for thermal insulation JC/T998-2006 2 Termal insulating panels 7 Burning grade(B2) 1016 Test method of flammability for building materials GB 8626-2007 Classification for burning behavior of building materials and products GB8624-2006 Moulded polystyrene foam board for thermal insulation GB/T 10801.1-2002 Rigid extruded polystyrene foam board for thermal insulation (XPS) GB/T 10801.2-2002 2 Termal insulating panels 8 Heat conductivitycoefficient 1016 Thermal insulation— Determination of steady-state thermal resistance and related properties--Guarded hot plate apparatus GB/T 10294-2008 Thermal insulation—Deter- mination of steady-state thermal resistance and related properties--Heat flow meter apparatus GB/T 10295-1988 Test method for thermal conductivity of plastics by means of the guarded hot plate GB/T 3399-1982 Moulded polystyrene foam board for thermal insulation GB/T 10801.1-2002 Rigid extruded polystyrene foam board for thermal insulation (XPS) GB/T 10801.2-2002 Spray polyurethane foam for thermal insulation JC/T998-2006 Spray-applied rigid polyurethane cellular plastics GB/T 20219-2006 External thermal insulation composite systems based on expanded polystyrene JG149-2003 Preformed flexible elast-omeric cellular thermal insulation GB/T 17794-2008 2 Termal insulating panels 9 Compressive strength 1016 Rigid cellular plastics - Determination of compression properties GB/T 8813-2008 Moulded polystyrene foam board for thermal insulation GB/T 10801.1-2002 Rigid extruded polystyrene foam board for thermal insulation (XPS) GB/T 10801.2-2002 Spray-applied rigid polyurethane cellular plastics GB/T 20219-2006 10 Permeability resistance Spray polyurethane foam for thermal insulation JC/T998-2006 11 Tensile strength by plumb -plate External thermal insulation composite systems based on expanded polystyrene JG149-2003 3 inorganic rigid thermal insulation 1 Dimension 1006 Test methods for inorganic rigid thermal insulation GB/T 5486-2008 2 Appearance 3 inorganic rigid thermal insulation 3 Compression strength 1006 Test methods for inorganic rigid thermal insulation GB/T 5486-2008 4 Flexural strength 5 Water content 6 Density Test methods for inorganic rigid thermal insulation GB/T5486-2008 Cellular glass product for thermal insulation JC/T 647-2005 7 Heat conductivitycoefficient Thermal insulation— Determination of steady-state thermal resistance and related properties--Guarded hot plate apparatus GB/T 10294-2008 Thermal insulation— Determination of steady-state thermal resistance and related properties--Heat flow meter apparatus GB/T 10295-1988 3 inorganic rigid thermal insulation 8 Water absorption 1006 Cellular glass product for thermal insulation JC/T 647-2005 Test methods for inorganic rigid thermal insulation GB/T5486-2008 4 Mineral wool and Glass wool 1 Compressive strength 1006 Test method for measuring compressive properties of mineral wool products GB/T 13480-1992 Rock wool,slag wool thermal insulating products for building GB/T 19686-2005 2 Water absorption Test methods for mineral wool and its products GB/T 5480-2008 3 Apparent density/density 4 Mineral wool and Glass wool 4 Heat conductivity coefficient/heat-resistance 1006 Thermal insulation— Determination of steady-state thermal resistance and related properties--Guarded hot plate apparatus GB/T 10294-2008 Thermal insulation— Determination of steady-state thermal resistance and related properties--Heat flow meter apparatus GB/T 10295-1988 5 Tensile strength Rock wool products for exterior insulation and finish systems(EIFS) GB/T 25975-2010 6 Moisture absorption Test methods for mineral wool and its products GB/T 5480-2008 5 Glass fiber mesh 1 Mass per unit area 1006 Test method for reinforcement products Part 3: Deter- mination of mass per unit area GB/T 9914.3-2001 5 Glass fiber mesh 2 Tensile breaking force 1006 Reinforcements--Test method for woven fabrics Part 5: Determination of tensile breaking force and elongation at break for glass fibre GB/T 7689.5-2001 3 Alkali-resistant strength retention(Alkali resistance) Reinforcements--Test method for woven fabrics Part 5: Determination of tensile breaking force and elongation at break for glass fibre GB/T 7689.5-2001 Test method for determining tensile breaking strength of glass fiber reinforcing mesh,after exposure to a sodium hydroxide solution GB/T 20102-2006 External thermal insulation composite systems based on expanded polystyrene JG 149-2003 5 Glass fiber mesh 4 elongation at break 1006 Reinforcements--Test method for woven fabrics Part 5: Determination of tensile breaking force and elongation at break for glass fibre GB/T 7689.5-2001 5 Coating volume(combustible matter content) Test method for reinforcement products Part 2: Determination of combustible matter content for glass fibre GB/T 9914.2-2001 Ⅻ Roads and bridges material 1 Bitumen and bituminous mixtures 1 AspHalt Penetration 1001 Standard Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering JTJ052-2000 2 AspHalt ductility 3 AspHalt soft point 4 adhesive ability of AspHalt and rough aggregate 1 Bitumen and bituminous mixtures 5 Density 1001 Standard Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering JTJ052-2000 6 Marshall stability 7 Marshall test of bituminous paving core 8 AspHalt content 9 Mineral materials grading Test Methhods of Aggregate for Highway Engineering JTG E42—2005 10 Mixture ratio design Technical specifications for construction of highway aspHalt pavements JTG F40-2004 ⅩⅢ Highway Engineer-ing 1 Roadbed and Pavement 1 Load Capacity(Deflection test) 1001 Field Test Methods of Subgrade and Pavement for Highway Engineering JTG E60-2008 Accredited only for: Beckman beam method 1 Roadbed and Pavement 2 Slip resistanceof pavement 1001 Field Test Methods of Subgrade and Pavement for Highway Engineering JTG E60-2008 Accredited only for: pendulum meter test、the method of handmade spreading 3 Thickness Accredited only for: digging and core-drilling method 4 Conpactness ⅩⅣ Glass 1 Sealed insulating glass unit 1 Dew point 310.01 Sealed insulating glass unit GB/T 11944-2002 ⅩⅤ Electric material 1 Electric wire and cable 1 D.C. resistanceof conductor 0424 Test methods for electrical properties of electric cables and wires - Part 4: Test of DC resistance of conductors GB/T 3048.4-2007 1 Electric wire and cable 2 Determining insulation resistance 424 Test methods for electrical properties of electric cables and wires - Part 5:Test of insulation resistance GB/T 3048.5-2007 3 A.C. voltage tests Test methods for electrical properties of electric cables and wires - Part 8:AC Voltage test GB/T 3048.8-2007 ≤15kV 4 Insulation thickness Common test methods for insulating and sheathing materials of electric and optical cables - Part 11:Methods for general application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties GB/T 2951.11-2008 5 Dimension 6 Mechnical properties 1 Electric wire and cable 7 Heat aging 424 Common test methods for insulating and sheathing materials of electric and optical cables - Part 12:Methods for general application-Thermal ageing methods GB/T 2951.12-2008 8 Density Common test methods for insulating and sheathing materials of electric and optical cables - Part 13:Methods for general application-Measurement for determining the density - Water absorption tests - Shrinkage test GB/T 2951.13-2008 9 Shrinkage test 1 Electric wire and cable 10 Test at low temperature 424 Common test methods for insulating and sheathing materials of electric and optical cables - Part 14:Methods for general application - Test at low temperature GB/T 2951.14-2008 11 Pressure test at high temperature Common test methods for insulating and sheathing materials of electric and optical cables - Part 31:Methods specific to PVC compounds - Pressure test at high temperature - Test for resistance to cracking GB/T 2951.31-2008 1 Electric wire and cable 12 Combustion of single insulated wire or cables 424 Tests on electric and optical fibre cables under fire conditions - Part 11:Test for vertical flame propagation for a single insulated wire or cable – Apparatus GB/T 18380.11-2008 Test on electric and optical fibre cables under fire conditions - Part 12:Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1kW pre-mixed flame GB/T18380.12-2008 Tests on electric and optical fibre cables under fire conditions - Part 21:Test for vertical flame propagation for a single small insulated wire or cable–Apparatus GB/T 18380.21-2008 Tests on electric and optical fibre cables under fire conditions - Part 22:Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame GB/T 18380.22-2008 ⅩⅥ Electrical Engineer-ing 1 Power Quality 1 Admissible deviation of supply voltage 0425 Quality-Deviation of supply voltage GB/T12325-2008 Code for acceptance of energy efficient building construction GB 50411-2007 Code for acceptance of energy efficient building construction SZJG 31-2010 Accredietd only for: Voltage below 1000V and currert below 1000A 2 Public network harmonicvoltage Power quality - Voltage fluctuation and flicker GB12326-2008 Code for acceptance of energy efficient building construction GB 50411-2007 Code for acceptance of energy efficient building construction SZJG 31-2010 1 Power Quality 3 Public network harmoniccurrent 425 Quality of electric energy supply--Harmonics in public supply network GB/T14549-1993 Code for acceptance of energy efficient building construction GB 50411-2007 Code for acceptance of energy efficient building construction SZJG 31-2010 Accredietd only for: Voltage below 1000V and currert below 1000A 4 Three-pHase voltage unbalance factor Power quality - Three-pHase voltage unbalance GB/T 15543-2008 Code for acceptance of energy efficient building construction GB 50411-2007 Code for acceptance of energy efficient building construction SZJG 31-2010 1 Power Quality 5 Three-pHase light distribution main line pHase load balance factor 425 Code for acceptance of energy efficient building construction GB 50411-2007 Code for acceptance of energy efficient building construction SZJG 31-2010 2 Monitoring and testing for energy saving of power supply distribution system of industrial enterprise 1 Deviation of supply voltage 0425 Technical guides for evaluating the rationality of electricity usage in industrial enterprise GB/T3485-1998 Monitoring and testing method for energy saving of power supply distribution system of industrial enterprise GB/T16664-1996 2 Daily load ratio 3 Power factor 4 Harmonic 5 Power factor 3 Three-pHase induction motor energy-saving operation 1 Input active power 0425 Three-pHase induction motor energy-saving operation GB/T12497-2006 2 Input reactive power 3 Power factor 4 Input voltage 5 Input current 4 Generic cabling system for building and campus 1 Reflection test on fiber link 0419 Code for engineering acceptance of generic cabling system GB/T50312-2007 2 Wire map 3 Attenuation 4 Near end cross talk ⅩⅦ Base and Foundation engineering 1 Foundation Pile 1 Static loading test for bearing capacity of foundation pile 1017 building foundation piles JGJ 106-2003 Code for design of building foundation GB 50007-2002 Code for testing of building foundation DBJ15-60-2008 Testing specification of building foundation piles SJG 09-2007 Technical code for building pile foundations JGJ 94-2008 1 Foundation Pile 2 Pile integrity(ultrasonic testing) 1017 building foundation piles JGJ 106-2003 Code for design of building foundation GB 50007-2002 Code for testing of building foundation DBJ15-60-2008 Testing specification of building foundation piles SJG 09-2007 Technical code for building pile foundations JGJ 94-2008 Technical code for testing of Technical specification for inspection of concrete defects by ultrasonic method CECS 21:2000 1 Foundation Pile 3 Pile integrity(low strain integrity testing) 1017 building foundation piles JGJ 106-2003 Code for design of building foundation GB 50007-2002 Technical code for building pile foundations JGJ 94-2008 Testing specification of building foundation piles SJG 09-2007 Code for testing of building foundation DBJ15-60-2008 4 Pile integrity(high strain dynamic testing) 5 High strain dynamic testing for pile integrity 6 Drill core testing 1 Foundation Pile 7 pile internal force testing 1017 Code for design of building foundation GB 50007-2002 Technical specification for retaining and protection of building foundation excavations JGJ 120-1999 Technical code for monitoring of building excavation engineering GB50497-2009 Technical code for retaining and protection of excavations in Shenzhen city SJG 05-2011 Code for investigation and design of foundation SJG 01-2010 2 Foundation 1 Static loading test for bearing capacity of nature foundation 1017 Code for design of building foundation GB 50007-2002 Code for testing of building foundation DBJ15-60-2008 Code for investigation of geotechnical engineering GB 50021-2001(2009) Code for investigation and design of foundation SJG 01-2010 2 Foundation 2 Static loading test for bearing capacity of composite foundation 1017 Technical code for ground treatment of buildings JGJ 79-2002 Code for design of building foundation GB 50007-2002 Code for testing of building foundation DBJ15-60-2008 Technical code for ground treatment in Shenzhen area SJG 04-1996 Code for investigation of geotechnical engineering GB 50021-2001(2009) Code for investigation and design of foundation SJG 01-2010 3 Bearing capacity of foundation soil(standard penetration test) Code for investigation of geotechnical engineering GB 50021-2001(2009) Code for testing of building foundation DBJ 15-60-2008 Code for investigation and design of foundation SJG 01-2010 2 Foundation 4 Bearing capacity of rock foundation(rock foundation load test) 1017 Code for design of building foundation GB 50007-2002 5 Bearing capacity of rock foundation(dynamic penetration test) Code for investigation of geotechnical engineering GB 50021-2001(2009) Code for testing of building foundation DBJ 15-60-2008 Code for investigation and design of foundation SJG 01-2010 dynamic penetration test YS 5219-2000| 2 Foundation 6 Anti-pull force for anchor and soil nail 1017 Technical specification for retaining and protection of building foundation excavations JGJ 120-1999 Technical code for retaining and protection of excavations in Shenzhen city SJG 05-2011 Technical code for building slope engineering GB50330-2002 Specification for bolt-shotcrete Support GB 50086-2001 Code for design of building foundation GB 50007-2002 Code for investigation and design of foundation SJG 01-2010 3 Building slope 1 Plane displacement 1017 Technical code for building slope engineering GB50330-2002 Code for engineering testing GB 50026-2007 Code for investigation and design of foundation SJG 01-2010 2 Plumb displacement 3 Crack of surface ground 4 Shotcrete weight 4 Building Foundation Excavations 1 plane displacement 1017 Code for design of building foundation GB 50007-2002 Technical code for monitoring of building excavation engineering GB50497-2009 Technical Specification for Retaining and Protection of Building Foundation Excavations JGJ 120-1999 Technical code for retaining and protection of excavations in Shenzhen city SJG 05-2011 Code for engineering testing GB 50026-2007 Code for investigation and design of foundation SJG 01-2010 2 Plane displacement 4 Building Foundation Excavations 3 Groundwater level 1017 Code for design of building foundation GB 50007-2002 Technical code for monitoring of building excavation engineering GB 50497-2009 Technical Specification for Retaining and Protection of Building Foundation Excavations JGJ 120-1999 Technical code for retaining and protection of excavations in Shenzhen city SJG 05-2011 Code for engineering testing GB 50026-2007 Code for investigation and design of foundation SJG 01-2010 4 Building Foundation Excavations 4 Heaving of the bottom 1017 Code for design of building foundation GB 50007-2002 Technical Specification for Retaining and Protection of Building Foundation Excavations JGJ 120-1999 Technical code for monitoring of building excavation engineering GB 50497-2009 Technical code for retaining and protection of excavations in Shenzhen city SJG 05-2011 Code for engineering testing GB 50026-2007 Code for investigation and design of foundation SJG 01-2010 4 Building Foundation Excavations 5 soil Pore water pressure 1017 Code for design of building foundation GB 50007-2002 Technical code for monitoring of building excavation engineering GB 50497-2009 Technical Specification for Retaining and Protection of Building Foundation Excavations JGJ 120-1999 Technical code for retaining and protection of excavations in Shenzhen city SJG 05-2011 Code for investigation and design of foundation SJG 01-2010 6 filling delaminationVertical displacement 7 shoring structure inner force 8 monitoring of soil pressure 4 Building Foundation Excavations 9 surface crack 1017 Technical code for monitoring of building excavation engineering GB 50497-2009 Code for investigation and design of foundation SJG 01-2010 Code for engineering testing GB 50026-2007 10 crack in Surrounding Building 11 Shotcrete strength Technical Specification for Retaining and Protection of Building Foundation Excavations JGJ 120-1999 Technical code for retaining and protection of excavations in Shenzhen city SJG 05-2011 Specification for bolt-shotcrete Support GB50086-2001 Code for investigation and design of foundation SJG 01-2010 5 Anchor 1 Anchor rodpulling force 1017 Technical code for retaining and protection of excavations in Shenzhen city SJG 05-2011 Specification for bolt-shotcrete Support GB50086-2001 Technical specification for ground anchors CECS 22:2005 Technical code for building slope engineering GB 50330-2002 Technical Specification for Retaining and Protection of Building Foundation Excavations JGJ 120-1999 Code for design of building foundation GB 50007-2002 Code for investigation and design of foundation SJG 01-2010 2 Anchor internalforce monitoring 6 Soil 1 Water content 1008.07 Standard for soil test method GB/T 50123-1999 Test Methods of Soils for Highway Engineering JTG E40-2007 Accredited only for: oven drying method、alcohol combustion method 2 Density Accredited only for: core cutter method 3 Compaction test ⅩⅧ Main body Structure engineer-ing 1 Concrete Structure 1 Concrete strength 1017 Technical specification for detecting strength of concrete by ultrasonic-rebound combined method CECS 02:2005 Technical Specification for Inspection of Concrete Compressive Strength by Rebound Method JGJ/T23-2011 Technical specification for testing concrete strength with drilled core CECS03:2007 Technical standard for inspection of building structure GB/T 50344-2004 Accredited only for: rebound method, ultrasonic-rebound combined method, drilled core method 2 Thickness of concrete cover Technical specification for test of reinforcing steel bar in concrete JGJ/T 152-2008 Code for acceptance of constructional quality of concrete structures GB50204-2002(2011) 1 Concrete Structure 3 Concrete defects 1017 Technical specification for Inspection of concrete defects by ultrasonic method CECS21:2000 Accredited only for: Depth of crack, Loose region and Cave, Quality of the concrete Joint Surfaces, Surface Damaged Layers. 4 Number, Diameters and Spacing of reinforcing steel bar Technical specification for test of reinforcing steel bar in concrete JGJ/T 152-2008 5 Bearing capacity of structure Testing methods of concrete structure GB50152-92 6 Dimension and deviation Technical standard for inspection of building structure GB/T 50344-2004 Code for acceptance of constructional quality of concrete structures GB 50204-2002(2011) 2 MasonryStructure 1 Compressive strength of brick 1012 The method of evaluating the fired common brick strength grading by rebound hammer JC/T 796-1999 2 Compressive strength of mortar Technical specification for testing compressive strength of masonry mortar by penetration resistance method JGJ/T136-2001 Technical standard for site testing of engineering GB/T 50315-2000 Accredited only for: rebound method, 3 Compressive strength of masonry Technical standard for site testing of engineering GB/T 50315-2000 Accredited only for:axial compression method 4 Dimension and deviation Technical standard for inspection of building GB/T 50344-2004 Code for acceptance of constructional quality of masonry structuresGB/T 50203-2011 3 built-in fitting 1 Bearing capacity of anchor 1017 Tension and shear test methods for building anchors DG/TJ08-003-2000 Technical Specification for Testing of Tension and Shear Behavior of Post-installed Fastenings Used in Concrete DBJ/T 15-35-2004 Technical specification for post-installed fastenings in concrete structures JGJ145-2004 Design code for strengthening concrete structure GB50367-2006 Appendix N 4 Tapestry Brick 1 Adhesivestrength 1017 Testing standard of adhesive strength of tapestry brick for construction engineering JGJ 110-2008 5 Carbon fiber sheet 1 Adhesivestrength 1017 Technical specification for strengthening concrete structures with carbon fiber reinforced polymer laminate CECS 146:2003(2007) ⅩⅨ Steel structure 1 steel structure 1 RadiograpHic testing 1101 RadiograpHic examination of fusion welded joints in metallic materials GB/T 3323-2005 Code for acceptance of construction quality of steel structures GB 50205-2001 1 steel structure 2 Ultrasonic testing 1101 Method for manual ultrasonic testing and classification of testing results for ferritic steel welds GB/T 11345-1989 Method for ultrasonic testing and classification for steel structures JG/T203-2007 Technical standard for in-site testing of steel structure GB/T 50621-2010 3 Magnetic particle test ing Non-destructive testing-Magnetic particle testing of welds JB/T 6061-2007 Magnetic particle testing for steel castings GB/T 9444-2007 Technical standard for in-site testing of steel structure GB/T 50621-2010 1 steel structure 4 Penetrantion testing 1101 Liquid Penetrant Inspection Method for Steel Forgings JB/T8466-1996 Penetrant testing for steel castings GB/T 9443-2007 Non-destructive testing-Penetrant testing of welds JB/T 6062-2007 Technical standard for in-site testing of steel structure GB/T 50621-2010 5 structural member thickness Non-destructive testing - Practice for measuring thickness by ultrasonic pulse-echo contact method GB/T 11344-2008 Technical standard for in-site testing of steel structure GB/T 50621-2010 6 Thickness of anticorrosion coating of steel structure Non-magnetic coatings on magnetic substrates- Measurement of coating thickness-Magnetic method GB/T 4956-2003 1 steel structure 7 Thickness of fire protection coating of steel structure 1101 Non-magnetic coatings on magnetic substrates- Measurement of coating thickness-Magnetic method GB/T 4956-2003 Code for acceptance of construction quality of steel structures GB50205-2001 8 Quality of welding connection appearance Code for acceptance of construction quality of steel structures GB 50205-2001 Technical standard for in-site testing of steel structure GB/T 50621-2010 9 appearance Technical standard for in-site testing of steel structure GB/T 50621-2010 10 Dimension and deviation 1 steel structure 11 Damage 1101 Technical standard for inspection of building structure GB/T 50344-2004 Code for design of steel structures GB 50017-2003Technical standard for in-site testing of steel structure GB/T 50621-2010 12 Partial distortion Technical standard for in-site testing of steel structure GB/T 50621-2010 13 Load-carrying capacity Technical standard for inspection of building structure GB/T 50344-2004 Technical specification for inspection,Assessment and Strengthening of Steel Structures YB 9257-1996 Code for acceptance of construction quality of steel structures GB 50205-2001 1 steel structure 14 Deformation inspection 1101 Code for deformation measurement of building and structure JGJ 8-2007 Technical standard for in-site testing of steel structure GB/T 50621-2010 Code for acceptance of construction quality of steel structures GB 50205-2001 2 Connect nodes of steel structure 1 Tensile strength 301.01 Bolted joints of space grid structures JG 10-2009 Welded hollow spHerical node of space grid structures JG 11-2009 3 Fastenersand high-strength bolting 1 Tensile strength 301.01 Metallic materials - Tensile testing - Part 1 : Method of test at room temperature GB/T228.1-2010 2 Shearing strength Pins and grooved pins-Shear test GB/T13683-1992 3 Wedge tensile strength?of actual material Mechanical properties of fasteners - Bolts,screws and studs GB/T 3098.1-2010 3 Fastenersand high-strength bolting 4 Connections with fastening axis force 301.01 Sets of torshear type high strength bolt hexagon nut and plain washer for steel structures GB/T 3632-2008 Except for M27、M30 5 Torque coefficient of connection Specifications of high strength bolts with large hexagon head ,large hexagon nuts,plain washers for steel structures GB/T 1231-2006 Code for acceptance of construction quality of steel structures GB 50205-2001 6 Anti-slide Coefficient Code for acceptance of construction quality of steel structures GB 50205-2001 ⅩⅩ Intelligent building engineering 1 Deformation measurement of building and structure 1 Sedimentation 1017 Code for deformation measurement of building and structure JGJ 8-2007 Code for engineering testing GB 50026-2007 Accredited Only for: level two, level three 1 Deformation measurement of building and structure 2 inclination observation 1017 Code for deformation measurement of building and structure JGJ 8-2007 Code for engineering testing GB 50026-2007 3 Crack Code for deformation measurement of building and structure JGJ 8-2007 Technical standard for inspection of building structure GB/T 50344-2004 Testing methods of concrete structure GB 50152-92 4 Bending deflection Code for deformation measurement of building and structure JGJ 8-2007 2 Structure 1 Displacement 1017 Testing methods of concrete structure GB50152-1992 2 Velocity Safety regulations for blasting GB 6722-2003 2 Structure 3 Acceleration 1017 Standard of limit and measurement method of vibration in the room of residential buildings GB/T50355-2005 4 Frequecy Standard of limit and measurement method of vibration in the room of residential buildings GB/T50355-2005 Safety regulations for blasting GB 6722-2003 5 Strain Testing methods of concrete structure GB50152-1992 ⅩⅩⅠ Air quality 1 Indoor environmrntalpollutants 1 Radon 0238 Standard methods for radon measurement in environmental air GB/T14582-1993 2 Formaldehyde Methods for determination of formaldehyde in air of public places GB/T18204.26-2000 1 Indoor environmrntalpollutants 3 Benzene 238 Code for indoor environmental pollution control of civil building engineering GB50325-2010 4 Ammonia Method for determination of ammonia in air of public places GB/T18204.25-2000 5 TVOC Code for indoor environmental pollution control of civil building engineering GB50325-2010 2 Air quality 1 Temperature 0238 Methods for determination of air temperature in public places GB/T18204.13-2000 2 Relative Humidity Methods for determination of air humidity in public places GB/T18204.14-2000 3 Air velocity Methods for determination of wind speed in public places GB/T18204.15-2000 2 Air quality 4 Air change flow 238 Method for determination of air change flow of indoor air in public places GB/T18204.18-2000 5 SO2 Ambient air--Determination of sulfur dioxide--Formaldehyde absorbing-pararosaniline spectropHotometry HJ 482-2009 6 NO2 Ambient air--Determination of nitrogen dioxide--Saltzman method GB/T15435-1995 7 CO Methods for determination of carbon monoxide in air of public places GB/T18204.23-2000 8 CO2 Methods for determination of carbon dioxide in air of public places GB/T18204.24-2000 2 Air quality 9 Ammonia 238 Method for determination of ammonia in air of public places GB/T18204.25-2000 10 Formaldehyde Methods for determination of formaldehyde in air of public places GB/T18204.26-2000 11 Ozone Method of examination of ozone in air of public places GB/T18204.27-2000 12 Benzene Standard method for hygienic examination of benzene,toluene and xylene in air of residential areas--Gas chromatograpHy GB/T11737-1989 13 Toluene Ambient air-Determination of benzene and its analogies using sorbent adsorption thermal desorption and Gas ChromatograpHy HJ 583-2010 14 xylene 2 Air quality 15 Inhalable particulate matter 238 Hygienic standard for inhalable particulate matter in indoor air GB/T17095-1997 16 TVOC Code for indoor environmental pollution control of civil building engineering GB50325-2010 17 Radon Standard methods for radon measurement in environmental air GB/T14582-1993 18 Total suspended particulates Ambient air--Determination of total suspended particulates--Gravimetric method GB/T15432-1995 19 Gamma-radiation dose rate Norm for the measurement of environmental terrestrial gamma-radiation dose rate GB/T14583-1993 ⅩⅩⅡ Water quality 1 Water 1 pH value 0233 Water quality--Determination of pH value--Glass electrode method GB6920-1986 2 Dissolved oxygen Water quality--Determination of dissolved oxygen--Electrochemical probe method HJ 506-2009 3 Suspended matter Water quality--Determination of suspended substance--Gravimetric method GB11901-1989 4 Biochemical oxygen demand after 5 days(BOD5) Water quality--Determination of biochemical oxygen demand after 5 days(BOD5)--Dilution and seeding method HJ 505-2009 5 Chemical oxygen demand(COD) Water quality--Determination of the chemical oxygen demand--Dichromate method GB11914-1989 ⅩⅩⅢ The solar utility system 1 Independent pHotovoltaic system 1 Output currentand voltage of pHotovoltaic array 1515 Independent pHotovoltaic system- design verification IEC 62124:2004 Accredited only for: current, voltage, temperature, irradiance 2 Numerical value of load current and voltage 3 Environmental temperature 4 Temperature of pHotovoltaic modules 5 Temperature of storage battery 6 Solar irradiance 2 Grid-connected PV system(The electric power quality of pHotovoltaic system) 1 harmonic and Waveform distortion 1515 Technical requirements for grid connection of PV system GB/T19939-2005 Accredited only for: product which pass the safety and protection test in this standard 2 Grid-connected PV system(The electric power quality of pHotovoltaic system) 2 frequency 1515 Technical requirements for grid connection of PV system GB/T19939-2005 Accredited only for: product which pass the safety and protection test in this standard 3 voltage deviation 4 Three-pHase voltage unbalance 3 Grid-connected PV system(The electrical performance of ?pHotovoltaic system) 1 Current 1515 PHotovoltaic system performance monitoring Guidelines for measurement, data exchange and analysis GB/T20513-2006 Accredited only for: test,not analysis 2 Voltage 3 Active power 4 Reactive power 5 Power factor 4 Grid-connected PV system(environ-mental parameter of pHotovolt-aic system) 1 Eenvironmental temperature 1515 PHotovoltaic system performance monitoring Guidelines for measurement, data exchange and analysis GB/T20513-2006 Accredited only for: test,not analysis. 2 Component temperature 3 Solar irradiance ⅩⅩⅣ Thermal infrared imaging 1 Building exterior wall facing 1 Plaster defect 1207 Technical specification for inspecting the defects of exterior walls cementing coats of building using infrared thermograpH method CECS204:2006 2 Electriferous equipment 1 Temperature difference 1207 Technical guide for infrared diagnosis of alive equipment DL/T664-2008 ⅩⅩⅤ Energy Efficiency Test 1 Thermal comfort level 1 Air temperature 1519 Moderate thermal environments--Determination of the PMV and PPD indices and specification of the conditions for thermal comfort GB/T 18049-2000 2 Humidity 3 Black-bulb temperature Hot environments--Estimation of the heat stress on working man based on the WBGT-index (wet bulb globe temperature) GB/T17244-1998 4 Relative air velocity Moderate thermal environments--Determination of the PMV and PPD indices and specification of the conditions for thermal comfort GB/T 18049-2000 2 Outdoor solar radiation 1 Solar total radiation 1519 Specifications for surface meteorological observation Part 11: Measurement of radiation QX/T55-2007 2 Outdoor solar radiation 2 Solar scattered radiation 1519 Specifications for surface meteorological observation Part 11: Measurement of radiation QX/T55-2007 3 Exterior wall energy efficient structure 1 Drill core check of exterior wall energy efficient structure 1017 Code for acceptance of energy efficient building construction GB50411-2007 Appendix C Code for acceptance of energy efficient building construction SZJG 31-2010 Appendix E 4 Industrial boiler 1 Exhaust gas temperature 1102 Monitoring and testing for energy saving of coal fired industrial boilers GB/T15317-2009 2 Air coefficient 3 Outward surface temperature of furnace body 5 Industrial boiler thermal properties 1 Thermal effiency 1102 Thermal performance test code for industrial boilers GB/T10180-2003 6 Air pollutants emission from boiler 1 Concentrationof SO2 1102 Emission standard of air pollutants for coal-burning of oil-burning gas-fired boiler GB 13271-2001 2 Concentrationof Nox 7 Monitoring and testing for energy saving of thermodyna-mic system 1 Outward surface temperature 1102 Monitoring and testing method for energy saving of heat transmission and distribution system GB/T15910-2009 2 Environmental temperature 3 Environmental wind velocity ⅩⅩⅥ Acoustic environmental quality 1 Sound insulation in buildings 1 Field measurements of airborne sound insulation 1404.06 Acoustics—Measurements of sound insulation in buildings and of building elements—Part 4:Field measurements of airborne sound insulation between rooms GB/T 19889.4-2005 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 5:Field measurements of airborne sound insulation of facade elements and facades GB/T 19889.5-2006 1 Sound insulation in buildings 2 Field measurements of impact sound insulation 1404.06 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 7:Field measurements of impact sound insulation of floors GB/T 19889.7-2005 2 Acoustical of gymnasium 1 Reverberation time 1404.06 Code for acoustical design and measurement of gymnasium JGJ/T 131-2000 2 Background noise 3 Most sound press level 4 Transmission frequency character 5 Transmission plus 6 Uniformity of soundfield 3 Hall 1 Reverberation time 1404.07 Acoustics-measurement of sound reverberation time in halls-specifications GBJ 76-1984 4 Soundfield 1 Noise 1404.02 1404.06 Standard of noise at boundary of industrial enterprises GB 12348-2008 Environmental quality standard for noise GB 3096-2008 Acoustics—Description,measurement and assessment of environmental noise—Part 1:Basic quantities and assessment procedures GB/T3222.1-2006 Acoustics - Description, measurement and assessment of environmental noise - Part 2: Determination of environmental noise levels GB/T3222.2-2009 Noise limits for construction site GB 12523-1990 Measurement method for noise from construction site GB 12524-1990 Emission standard for community noise GB22337-2008 ⅩⅩⅦ Profiles and sealants 1 Profiles(doors, windows and their materials of buildings) 1 Dimension 0301 0302 Wrought aluminium alloy extruded profiles for architecture - Part 1: Mill finish profiles GB 5237.1-2008 Wrought aluminium alloy extruded profiles for architecture - Part 2: Anodized profiles GB 5237.2-2008 Wrought aluminium alloy extruded profiles for architecture—Part 3: ElectropHoretic coating profiles GB 5237.3-2008 Wrought aluminium alloy extruded profiles for architecture—Part 4:Powder coating profiles GB 5237.4-2008 2 Appearance 1 Profiles(doors, windows and their materials of buildings) 2 Appearance 0301 0302 Wrought aluminium alloy extruded profiles for architecture—Part 5:PVDF coating profiles GB 5237.5-2008 Unplasticized polyvinyl chloride (PVC-U) profiles for the doors and windors GB/T8814-2004 Aluminium alloy plate for curtain wall - untreated plate YS/T429.1-2000 Aluminium alloy plate for curtain wall - PVDF coating plate YS/T 429.2-2000 Metal ceilings QB1561-1992 3 Tensile strength Metallic materials - Tensile testing - Part 1 : Method of test at room temperature GB/T228.1-2010 4 Percentage extension 1 Profiles(doors, windows and their materials of buildings) 5 Coating thickness/ Thickness of coating 0301 0302 Non-conductive coatings on non-magnetic basis metals—Measurement of coating thickness—Eddy current GB/T4957-2003 6 Quality of sealed anodic oxide coating Anodizing of aluminium and aluminium alloys—Assessment of quality of sealed anodic oxide coatings—Part 2: PHospHoric acid/chromic acid test with nitric acid predip GB/T 8753.2-2005 7 Adhesion ofpaint films Method of test for adhesion of paint films GB1720-1979 Paints and varnishes-Cross cut test for films GB/T9286-1998 1 Profiles(doors, windows and their materials of buildings) 8 Boiling water resistance 0301 0302 Wrought aluminium alloy extruded profiles for architecture—Part 3: ElectropHoretic coating profiles GB 5237.3-2008 Wrought aluminium alloy extruded profiles for architecture—Part 4:Powder coating profiles GB 5237.4-2008 9 Acid resistance Wrought aluminium alloy extruded profiles for architecture—Part 3:ElectropHoretic coating profiles GB 5237.3-2008 Wrought aluminium alloy extruded profiles for architecture—Part 4:Powder coating profiles GB 5237.4-2008 Wrought aluminium alloy extruded profiles for architecture—Part 5:PVDF coating profiles GB 5237.5-2008 1 Profiles(doors, windows and their materials of buildings) 10 Solvent resistance 0301 0302 Wrought aluminium alloy extruded profiles for architecture—Part 3:ElectropHoretic coating profiles GB 5237.3-2008 Wrought aluminium alloy extruded profiles for architecture—Part 4:Powder coating profiles GB 5237.4-2008 Wrought aluminium alloy extruded profiles for architecture—Part 5:PVDF coating profiles GB 5237.5-2008 11 Impact resistance Wrought aluminium alloy extruded profiles for architecture—Part 4:Powder coating profiles GB 5237.4-2008 Wrought aluminium alloy extruded profiles for architecture—Part 5:PVDF coating profiles GB 5237.5-2008 1 Profiles(doors, windows and their materials of buildings) 12 Film hardness 0301 0302 Paints and varnishes—Determination of film hardness by pencil test GB/T 6739-2006 13 Vicat softening temperature Plastics--Thermoplastic materials--Determination of vicat softening temperature(VST) GB/T1633-2000 14 Appearance after heating Unplasticized polyvinyl chloride (PVC-U) profiles for the doors and windors GB/T8814-2004 15 Changeing rate dimensions on heating 16 Machine Direction Tensile test Wrought aluminium alloy extruded profiles for architecture—Part 6:Thermal barrier profiles GB 5237.6-2004 17 Cross Direction Tensile test 2 Acrylate sealant for building 1 Shore hardness 0318 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1:Duromerer method (Shore hardness) GB/T531.1-2008 2 Tack-free time Test method for building sealants Part 5:Determination for tack-free time GB/T13477.5-2002 3 Flow Test method for building sealants Part 6:Determination of flow GB/T13477.6-2002 4 Tensile bondproperties Test method for building sealants Part 8:Determination of tensile properties GB/T13477.8-2002 5 Tensile bond strength after soaking Test method for building sealants Part 9:Determination of adhesion/cohesion properties after immersion in water GB/T13477.9-2002 6 Thermal aging Structural silicon sealants for building GB16776-2005 2 Acrylate sealant for building 7 Compatibility with attachments 318 Structural silicon sealants for building GB16776-2005 8 Compatibility with the base materials ⅩⅩⅧ Ventilat-ing and air-condit-ionengineer-ing 1 Ventilating and air-condition 1 Wind speed and blast volume 343.04 Code of acceptance for construction quality of ventilation and air conditioning works GB50243-2002 Central-station air handling units GB/T14294-2008 2 Wind pressure 3 Light leakage Code of acceptance for construction quality of ventilation and air conditioning works GB50243-2002 Technical specification of air duct JGJ141-2004 4 Leakage blast volume 1 Ventilating and air-condition 5 Compression strength 343.04 Technical specification of air duct JGJ141-2004 6 Water presure Code of acceptance for construction quality of ventilation and air conditioning works GB50243-2002 7 Ratational speed 8 Temperature Standard for energy efficiency test of public buildings JGJ/T 177-2009 9 Water flow quantity Ultrasonic flowmeter for potable water and drain water (Transmission speed difference method) CJ/T 3063-1997 10 Power Direct acting indicating analogue electrical measuring instruments and their accessories. Part 3: Special requirements for wattmeters and varmeters GB/T 7676.3-1998 1 Ventilating and air-condition 11 Coefficient of cost electricity transport power 343.04 Design standard for energy efficiency of public buildings GB 50189-2005 12 Cost power of wind engine unit 13 Sound pressure level of noise Determination of sound power levels for noise emitted by heating ventilating and air conditioning equipment- Engineering method GB9068-1988 2 Glass fiber reinforced plastic cooling tower 1 Thermodynamic performance 343.04 Glass fiber reinforced plastic cooling tower--Part 1: Middle and small glass fiber reinforced plastic cooling tower GB 7190.1-2008 Standard Practice for Cooling Towers CECS118-2000 2 Noise 3 Rate of power consumption 4 Cooling towerair volume 2 Glass fiber reinforced plastic cooling tower 5 Rate of water drift 343.04 Glass fiber reinforced plastic cooling tower--Part 1: Middle and small glass fiber reinforced plastic cooling tower GB 7190.1-2008 Standard Practice for Cooling Towers CECS118-2000 3 Integrated effect for operation and management of central air condition system 1 Indoor temperature 343.04 Methods for determination of air temperature in public places GB/T18204.13-2000 2 Indoor relative humidity Methods for determination of air humidity in public places GB/T18204.14-2000 3 Indoor air flowspeed Methods for determination of wind speed in public places GB/T18204.15-2000 4 Fresh air volume Method for determination of air change flow of indoor air in public places GB/T18204.18-2000 3 Integrated effect for operation and management of central air condition system 5 Indoor noise 343.04 Method for determination of noise in public places GB/T18204.22-2000 6 CO Methods for determination of carbon monoxide in air of public places GB/T18204.23-2000 7 CO2 Methods for determination of carbon dioxide in air of public places GB/T18204.24-2000 8 Equipment andpipe thermal insulation Method of measuring and evaluation thermal insulation effects for equipments and pipes GB/T 8174-2008 4 Economic operation of air condition 1 Air-conditioning energy consumption per unit area 343.04 Economic operation of air conditioning systems GB/T17981-2007 2 Air-conditioning cold consumption per unit area 4 Economic operation of air condition 3 Energy efficiency ratio of air-conditioning system 343.04 Economic operation of air conditioning systems GB/T17981-2007 4 Energy efficiency ratio of Refrigeration system 5 Chilled water transport factor 6 The energy efficiency ratio of air-conditioning terminal 7 The operating efficiency of water chiller 8 Cooling water transport factor 5 Monitoring and testing for energy saving of fan unit and distribution tubesystem 1 Fan all press 343.04 Monitoring and testing for energy saving of fan's unit and distribution tube system GB/T15913-2009 5 Monitoring and testing for energy saving of fan unit and distribution tubesystem 2 Fan Flow 343.04 Monitoring and testing for energy saving of fan's unit and distribution tube system GB/T15913-2009 3 Electrical energy utilization rate of fan unit 4 Electromotor load rate 6 Monitoring and testing method for energy saving of air compressor unit and air distribute-ion system 1 Discharge temperature 343.04 Monitoring and testing method for energy saving of air compressor unit and air distribution system GB/T16665-1996 2 Cold in-water temperature 3 Cold in-water and out-water temperature difference 4 Electricity intensity of air compressor unit 7 Monitoring and Testing for Energy Saving of Motor-pump Liquid Transport System 1 Electromotor load rate 343.04 Monitoring and testing method for energy saving of motor- pump liquid transport system GB/T16666-1996 2 Category of pumps and their efficiencies 3 Category of pumps and liquid transportation systems and their efficiencies ⅩⅩⅨ Optical environ-ment of buiilding 1 Daylighting 1 Daylighting coefficient 0328 Methods of daylighting measurements GB/T5699-2008 2 Reflectance coefficient 3 Luminous transmittance 2 Lighting system 1 Luminance 0328 Measurement methods for lighting GB/T 5700-2008 Standard for lighting design and test of sports venues JGJ 153-2007 2 Capacity density of Lighting Measurement methods for lighting GB/T 5700-2008 3 Luminance 4 Color rendering index Measurement methods for lighting GB/T 5700-2008 Standard for lighting design and test of sports venues JGJ 153-2007 5 Color temperature 中国合格评定国家认可委员会 认可证书附件(注册号:CNAS L0931) 名称: 深圳市建筑科学研究院股份有限公司 地址:广东省深圳市福田区上梅林梅坳三路29号 签发日期:2012年01月18日 有效期至:2015年01月17日 更新日期:2012年01月18日 附件3 认可的授权签字人及领域 序号 姓名授权签字领域 备注1叶青全部(不包括钢结构焊缝无损探伤)检测项目 2 陈泽广 地基与基础工程、主体结构工程、钢结构工程(不包括钢结构焊缝无损探伤)、建筑物检测项目 3 刘俊跃 太阳能应用系统、红外热成像、建筑节能、建筑声环境、通风与空调工程、建筑光环境检测项目 4 王莹 混凝土结构材料、砌体结构材料、砂浆、金属结构材料及其制品/焊接件、预制混凝土构配件、装饰装修材料、防水材料、嵌缝密封材料、胶粘剂、管网材料、保温吸声材料、道桥材料、玻璃、电气材料、水质、幕墙及门窗/型材检测项目、空气质量和材料污染物检测项目. 5 罗刚混凝土结构材料、砌体结构材料、砂浆、金属结构材料及其制品/焊接件、预制混凝土构配件、装饰装修材料、防水材料、嵌缝密封材料、胶粘剂、管网材料、保温吸声材料、玻璃、电气材料、幕墙及门窗/型材检测项目 6 郭志坚 空气质量和材料污染物检测项目 7 刘勇 电气工程检测项目 8 陈孟辉 地基与基础工程、主体结构工程、钢结构工程(不包括钢结构焊缝无损探伤)、建筑物、混凝土结构材料、砌体结构材料、砂浆、金属结构材料及其制品/焊接件、预制混凝土构配件、装饰装修材料、防水材料、嵌缝密封材料、胶粘剂、管网材料、保温吸声材料、道桥材料、玻璃、幕墙及门窗/型材、道路工程检测项目 9 汪四新 地基与基础工程、主体结构工程、钢结构工程(不包括钢结构焊缝无损探伤)、建筑物、道路工程检测项目 10 吕志军 地基与基础工程、主体结构工程、钢结构工程(不包括钢结构焊缝无损探伤)、建筑物、道路工程检测项目 11 唐圣锋 钢结构焊缝无损探伤检测项目 12 马晓雯 太阳能应用系统、红外热成像、建筑节能、建筑声环境、通风与空调工程、建筑光环境检测项目、电气工程检测项目 CHINA NATIONAL ACCREDITATION SERVICE FOR CONFORMITY ASSESSMENT APPENDIX OF ACCREDITATION CERTIFICATE (Registration No. CNAS L0931) NAME:Shenzhen Institute of Building Research Co., Ltd. ADDRESS: No.29, Mei'ao 3rd Road, Upper Meilin, Futian District, Shenzhen, Guangdong, China Date of Issue:2012-01-18 Date of Expiry:2015-01-17 Date of Update:2012-01-18 APPENDIX 3 ACCREDITED SIGNATORIES AND SCOPE № Name Authorized Scope of Signature Note 1 Ye Qing Authorized testing items except for non-destroy detection of welding line. 2 Chen Zeguang Authorized testing items for Base and foundation engineering, main body structure engineering, steel structure engineering except for non-destroy detection of welding line,building. 3 Liu Junyue Authorized testing items for Solar energy application system, diagnoses of infrared thermal imagery, building energy efficiency, building acoustic environment, air-conditioning and ventilation enggineering, building optical environment. 4 Wang Ying Authorized testing items for Concrete structure materials, masonry structure materials, mortar, metallic materials, metal products and weldments, precast concrete unit, decorating and refurbishing materials, waterproof materials, joint sealing material, adhesive, pipe, thermal insulation materials and sound absorption materials, road and bridge materials, glass, electrical materials, water quality,curtain walls, doors, windows and their materials of buildings,air quality and pollutants of materials. 5 Luo Gang Authorized testing items for Concrete structure materials, masonry structure materials, mortar, metallic materials, metal products and weldments, precast concrete unit, decorating and refurbishing materials, waterproof materials, joint sealing material, adhesive, pipe, thermal insulation materials and sound absorption materials, glass, electrical materials, curtain walls, doors, windows and their materials of buildings. 6 Guo Zhijian Authorized testing items for air quality and pollutants of materials. 7 Liu Yong Authorized testing items for electrical engineering. 8 Chen Menghui Authorized testing items for Base and foundation engineering, main body structure engineering, steel structure engineering except for non-destroy detection of welding line,building,concrete structure material, masonry structure materials, mortar,metallic material, metal products and weldments, precast concrete unit, decorating and refurbishing materials, waterproof materials,joint sealing materials, adhesive, pipe, thermal insulation materials and sound absorption materials, road and bridge materials,glass,curtain walls, doors, windows and their materials of buildings,highway engineering. 9 Wang Sixin Authorized testing items for Base and foundation engineering, main body structure engineering, steel structure engineering except for non-destroy detection of welding line,building, highway engineering. 10 Lv Zhijun Authorized testing items for Base and foundation engineering, main body structure engineering, steel structure engineering except for non-destroy detection of welding line,building, highway engineering. 11 Tang Shengfeng Authorized testing items for Steel structure welding line non-destroy detection. 12 Ma Xiaowen Authorized testing items for Solar energy application system, diagnoses of infrared thermal imagery, building energy efficiency, building acoustic environment, air- conditioning and ventilation enggineering, building optical environment test items, electrical engineering. 中国合格评定国家认可委员会 认可证书附件(注册号:CNAS L0931) 名称: 深圳市建筑科学研究院股份有限公司 地址:深圳市光明新区光明街同富裕工业园内俊伟兴厂区B栋1楼 签发日期:2012年01月18日 有效期至:2015年01月17日 更新日期:2012年01月18日 附件1 认可的检测能力范围 序号 检测 对象 项目/参数 领域 代码 检测标准(方法)名称及编号(含年号) 限制 范围 说明 序号 名称 一 太阳能应用系统 1 太阳能集热器 1 平板型太阳集热器热性能 1515 平板型太阳能集热器 GB/T 6424-2007 2 真空管太阳集热器热性能 真空管型太阳能集热器 GB/T 17581-2007 3 全玻璃真空太阳集热管热性能 全玻璃真空太阳集热管GB/T17049-2005 2 家用太阳热水器 1 家用太阳热水器热性能 1515 家用太阳热水系统热性能试验 方法 GB/T18708-2002 3 太阳热水系统 1 太阳辐照量 1515 太阳热水系统性能评定规范 GB/T 20095-2006 太阳能热水系统设计、安装 及工程验收技术规范 GB/T18713-2002 2 温度 3 风速 4 时间 5 质量 6 长度 7 压力 4 (晶体硅、薄膜)光伏组件 1 开路电压 1515 地面用晶体硅光伏组件 设计鉴定和定型 GB/T9535-1998 晶体硅地表光伏电池组件.设计质量和型式批准 IEC 61215:2005 2 短路电流 3 最佳工作电压 4 最佳工作电流 5 最大功率 5 家用太阳能光伏系统 1 输出频率稳定度 1515 家用太阳能光伏系统 第1部分:技术条件 NY/T1146.1-2006 2 输出电压调整率 家用太阳能光伏系统 第2部分:试验方法 NY/T1146.2-2006 3 输出波形失真度 二 节能检测 1 围护结构热工性能 1 墙体传热系数 1017 建筑构件稳态热传递性质的测定标定和防护热箱法 GB/T13475—2008 只用防护热箱法 2 热反射隔热涂料 1?太阳反射比 0215 建筑外表面用热反射隔热涂料 JC/T 1040-2007 航天热控涂层试验方法 第2部分:太阳吸收比测试 GJB2502.2-2006 2?半球发射率 航天热控涂层试验方法 第3部分:太阳发射率测试GJB2502.3-2006 3?太阳辐射吸收系数 航天热控涂层试验方法 第2部分:太阳吸收比测试GJB2502.2-2006 三 建筑门窗、幕墙 1 门、窗1传热系数 0327 建筑外门窗保温性能分级及 检测方法 GB/T 8484-2008 2 抗风压性能 建筑外门窗气密、水密、抗风 压性能分级及检测方法 GB/T 7106-2008 3 气密性能 4 水密性能 5 外观 铝及铝合金阳极氧化膜检测方法 第6部分:目视观察法检验着色阳极氧化膜色差和外观质量 GB/T 12967.6-2008 6 尺寸 铝合金门窗 GB/T8478-2008 7 构造 8 装配质量 1 门、窗9锁紧器开关力 327 未增塑聚氯乙烯(PVC-U)塑料门窗力学性能及耐候性能试验方法 GB/T11793-2008 10 悬端吊重 11 翘曲或弯曲变形 12 扭曲变形 13 对角线变形 14 撑挡试验 15 开启限位器试验 16 大力关闭试验 17 启闭力 建筑用窗承受机械力的检测方法 GB/T9158-1998 18 反复启闭性能 建筑门窗反复启闭性能检测方法 JG/T192-2006 19 抗风压性能现场检测 建筑外窗气密、水密、抗风压 性能现场检测方法 JG/T211-2007 20 气密性能现场检测 21 水密性能现场检测 2 建筑幕墙 1 气密性能 1017 建筑幕墙气密、水密、抗风压 性能检测方法 GB/T 15227-2007 2 抗风压性能 3 水密性能 4 平面内变形 建筑幕墙平面内变形性能检测 方法 GB/T 18250-2000 四 通风与空调工程 1 风机盘管 1 风量 343.04 风机盘管机组 GB/T 19232-2003 柜式风机盘管机组 JB/T 9066-1999 立柱式风机盘管机组 JB/T 6415-1992 2 输入功率 3 供冷量 4 供热量 5 水量和水阻 6 出口静压 风机盘管机组 GB/T 19232-2003 柜式风机盘管机组 JB/T 9066-1999 7 噪声 风机盘管机组 GB/T 19232-2003 柜式风机盘管机组 JB/T 9066-1999 立柱式风机盘管机组 JB/T 6415-1992 2 多联式空调(热泵)机组 1 室内机制冷量 343.04 多联式空调(热泵)机组 GB/T 18837-2002 2 室内机消耗功率 3 制冷量 4 制冷消耗功率 5 室内机制热量 6 制热量 7 制热消耗功率 2 多联式空调(热泵)机组 8 电热装置制热消耗功率 343.04 多联式空调(热泵)机组 GB/T 18837-2002 9 噪声 10 机组的分流不平衡率 11 综合制冷性能系数 多联式空调(热泵)机组 GB/T 18837-2002 多联式空调(热泵)机组能效限定值及能源效率等级 GB21454-2008 12 综合制热性能系数 五 建筑光环境 1 灯和灯系统 1 光通量 0328 白炽灯泡光电参数的测量方法 GB/T 15043-2008 单端荧光灯 性能要求 GB/T 17262-2002 普通照明用自镇流荧光灯 性能要求GB/T17263-2002 双端荧光灯 性能要求 GB/T10682-2010 放电灯(荧光灯除外)特性测量方法 GB/T 13434-2008 1 灯和灯系统 2 光效 普通照明用双端荧光灯能效限定值及能效等级 GB19043-2003 普通照明用自镇流荧光灯能效 限定值及能效等级 GB19044-2003 高压钠灯能效限定值及能效等级GB19573-2004 放电灯(荧光灯除外)特性测量方法 GB/T13434-2008 3 光生物安全性 灯和灯系统的光生物安全性 GB/T 20145-2006 4 谐波含量限值 电磁兼容 限值 谐波电流发射限值(设备每相输入电流≤16A) GB 17625.1-2003 建筑节能工程施工质量验收规范 GB 50411-2007 建筑节能工程施工验收规范 SZJG 31-2010 2 灯具 1 灯具效率 0328 灯具分布光度测量的一般要求 GB/T 9468-2008 3 镇流器 1 镇流器能效因数(流明系数、能效限定值) 0328 高压钠灯用镇流器能效限定值及节能评价值 GB 19574-2004 管形荧光灯镇流器能效限定值及节能评价值 GB 17896-1999 金属卤化物灯用镇流器能效限定值及能效等级 GB 20053-2006 六 玻璃 1 建筑玻璃 1 可见光透射比 310.01 建筑玻璃 可见光透射比,太阳光直接透射比、太阳能总透射比、紫外线透射比及有关窗玻璃参数的测定 GB/T2680-1994 建筑门窗幕墙热工计算规程JGJ/T151-2008 建筑玻璃窗膜技术规范 CAS142-2007 广东省建筑门窗幕墙玻璃贴膜节能技术规程 DBJ/T15-66-2009 2 可见光反射比 3 玻璃遮阳系数 4 太阳光透射比 5 太阳光反射比 6 太阳光吸收比 7 太阳能总透射比 8 玻璃半球发射率 9 传热系数 中空玻璃稳态U值(传热系数)的计算及测定 GB/T22476-2008 建筑门窗幕墙热工计算规程 JGJ/T151-2008 CHINA NATIONAL ACCREDITATION SERVICE FOR CONFORMITY ASSESSMENT APPENDIX OF ACCREDITATION CERTIFICATE (Registration No. CNAS L0931) NAME:Shenzhen Institute of Building Research Co., Ltd. ADDRESS:F1, Building B, Junweixing Factory Zone, Tongfuyu Industry Park, Guangming Block, Guangming New District, Shenzhen, Guangdong, China Date of Issue:2012-01-18 Date of Expiry:2015-01-17 Date of Update:2012-01-18 APPENDIX 1 SCOPE OF ACCREDITED TESTING № Test Object Item/Parameter Code of Field Title, Code of Standard or Method Limitation Note № Item/ Parameter Ⅰ The solar utility system 1 The solarcollector 1 The thermal performance of flat plate solar collectors 1515 Flat plate solar collectors GB/T 6424-2007 2 The thermal performance of vacuum-tube solar collectors Evacuated tube solar collectors GB/T 17581-2007 1 The solarcollector 3 The thermal performance of all-glass vacuum solar collectors 1515 All-glass evacuated solar collector tubes GB/T17049-2005 2 Domestic solar water heaters 1 The test for the thermal performance of the domestic solar water heater 1515 Test methods for thermal performance of domestic solar water heating systems GB/T18708-2002 3 The solar hot-water system 1 The solar radiant exposure 1515 Assessment code for performance of solar water heating systems GB/T 20095-2006 Solar water heating systems--design,installation and engineering acceptance GB/T18713-2002 2 Temperature 3 wind speed 4 Time 5 Weight 6 length 7 pressure 4 (Crystalline silicon、Thin film )photovoltaic(PV) modules 1 Open-circuit voltage 1515 Crystalline silicon terrestrial photovoltaic(PV)modules-design qualification and type approval GB/T9535-1998 Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval IEC 61215:2005 2 Short-circuit current 3 Optimum operating voltage 4 Optimum operating current 5 Maximum power 5 Domestic solar photovoltaic system 1 Output frequency stability 1515 Solar energy PV generation system for household Part 1:Technical condition NY/T1146.1-2006 2 Output voltage regulation Solar energy PV generation system for household Part 2: Test method NY/T1146.2-2006 5 Domestic solar photovoltaic system 3 Output waveform distortion 1515 Solar energy PV generation system for household Part 2: Test method NY/T1146.2-2006 Ⅱ Energy Efficiency Test 1 The thermal performance of exterior-protected construction 1 The heat-transfor coefficient of wall 1017 Building element-Determinatin of steady-state thermal transmission properties-Calibrated and guarded hot box GB/T13475—2008 Accredited only for: guarded hot box method 2 Reflective thermalInsulating coating 1 Solarreflectance rate 0215 Reflective thermal Insulating coating for outside of building JC/T1040-2007 Test method for thermal control coatings of spacecraft Part 2:Measurement of solar absorptance GJB2502.2-2006 2 Hemispherical emmisivity Test method for thermal control coatings of spacecraft Part 3:Measurement of emissivity GJB2502.3-2006 2 Reflective thermalInsulating coating 3 solar radiation absorption coefficient Test method for thermal control coatings of spacecraft Part 2:Measurement of solar absorptance GJB2502.2-2006 Ⅲ Building doors and windows/Curtain walls 1 doors and windows 1 Heat transfer coefficient 0327 Graduation and test method for thermal insulating properties of doors and windows GB/T 8484—2008 2 Wind resistance performance Graduations and test methods of air permeability, watertightness, wind load resistance performance for building external windows and doors GB/T 7106-2008 3 Air permeability performance 4 Water tightness performance 1 doors and windows 5 Appearance 0327 Test Methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 6:Determination of color differences and appearance of colored anodic oxide films by viewing method GB/T 12967.6-2008 6 Size deviation Aluminium windows and doors GB/T 8478-2008 7 structure 8 assembly quality 9 Locking power switch Test methods on mechanical and weathering properties for unplasticized polyvinyl chloride (PVC-U) doors and windows GB/T 11793-2008 10 Suspension load 11 Warping/ Bending test 12 Torsion performance 1 doors and windows 13 Diagonal deformation 327 Test methods on mechanical and weathering properties for unplasticized polyvinyl chloride (PVC-U) doors and windows GB/T 11793-2008 14 Support block test 15 Open limit switch test 16 Strong off test 17 Opening and Mechanical test methods windows GB/T 9158-1998 18 Repeat switch Test method for reqpeated opening and closing performance of windows and doors JG/T 192-2006 19 Field testof wind load resistance performance Field test method of air permeability,watertightness,wind load resistance performance for exterior windows JG/T211-2007 1 doors and windows 20 Field test of air permeability, Field test method of air permeability,watertightness,wind load resistance performance for exterior windows JG/T211-2007 21 Field test of watertightness, 2 curtain walls 1 Air permeability performance 1017 Test method of air permeability,waterightness,wind load resistance performance for curtain walls GB/T 15227-2007 2 Wind resistance performance 3 Water tightness performance 4 In plane deformation Test method for performance in plane deformation of curtain wall GB/T 18250-2000 Ⅳ Ventilating and air-condit-ionEngineer-ing 1 Fan coil unit 1 Blast volume 343.04 Fan-coil unit GB/T 19232-2003 Cabinet type fan coil unit JB/T 9066-1999 Pillar type fan coil unit JB/T 6415-1992 2 Input power 3 Supply cooling load 4 Heating load 5 Water flowmeter and hydraulic drag 6 Outlet static pressure Fan-coil unit GB/T 19232-2003 Cabinet type fan coil unit JB/T 9066-1999 7 Noise Fan-coil unit GB/T 19232-2003 Cabinet type fan coil unit JB/T 9066-1999 Pillar type fan coil unit JB/T 6415-1992 2 Multi-connected air-condition (heat pump) unit 1 refrigerating capacity of indoor machine 343.04 Multi-connected air-condition (heat pump) unit GB/T 18837-2002 2 consumed power of indoor machine 2 Multi-connected air-condition (heat pump) unit 3 refrigerating capacity 343.04 Multi-connected air-condition (heat pump) unit GB/T 18837-2002 4 refrigerating consumed power 5 heating capacity of indoor machine 6 heating capacity 7 heating consumed power 8 heating consumed power of electric heating apparatus 9 noise 10 distributary disequilibrium rate of multi-connected air-condition (heat pump) unit 2 Multi-connected air-condition (heat pump) unit 11 refrigerating integrated part load value Multi-connected air-condition (heat pump) unit GB/T 18837-2002 The minimum allowable values of the IPLV and energy efficiency grades for multi-connected air-condition(heat pump) unit GB 21454-2008 12 heating integrated part load value Ⅴ Optical environ-Ment of building 1 Lamps and lamp systems 1 Luminous flux 0328 Method of measuring electrical and photometric characteristics for incandescent lamps GB/T 15043-2008 Single-capped fluorescent lamps-Performance requirements GB/T 17262-2011 Self-ballasted lamps for general lighting service-Performance requirements GB/T17263-2002 Double-capped fluorescent lamps - Performance specifications GB/T10682-2010 Methods of measuring characteristics for dischargelamps (excluding fluorescent lamps) GB/T 13434 -2008 1 Lamps and lamp systems 2 Luminousefficiency Limited values of energy efficiency and rating criteria of double-capped fluorescent lamps for general lighting service GB19043-2003 Limited values of energy efficiency and rating criteria of self-ballasted fluorescent lamps for general lighting service GB19044-2003 Limited values of energy efficiency and rating criteria for high-pressure sodium vapour lamps GB19573-2004 Methods of measuring characteristics for discharge lamps (excluding fluorescent lamps) GB/T 13434 -2008 3 Photobiological safety Photobiological safety of lamps and lamp systems GB/T 20145-2006 1 Lamps and lamp systems 4 Compatibility-Limits-Limits for Harmonic Content Electromagnetic Compatibility-Limits-Limits for Harmonic Current Emissions (equipment input current≤16A per phase) GB 17625.1-2003 Code for acceptance of energy efficient building construction GB 50411-2007 Code for acceptance of energy efficient building construction SZJG 31-2010 2 Lamps and lamp systems 1 Efficiency of lamp 0328 General requirements for the photometry and goniophotometry of luminaries GB/T 9468-2008 3 Luminaire Ballast 1 Luminaireefficiency BEF(ballast lumen factor、minimum allowable values of energy efficiency) 0328 Limited values of energy efficiency and evaluating values of energy conservation of ballast for high-pressure sodium lamps GB 19574-2004 Limited values of energy efficiency and evaluating values of energy conservation of ballasts for tubular fluorescent lamps GB 17896-1999 The minimum allowable values of energy efficiency and the energy efficiency grades for ballast of metal-halide lamps GB 20053-2006 Ⅵ Glass 1 Glass in building 1 Transmissivity of visible light 310.01 Determination of light transmittance,solar direct transmittance,total solar energy transmittance and ultraviolet transmittance for glass in building and related glazing factors GB/T2680-1994 Calculation specification for thermal performance of windows,doors and glass curtain-walls JGJ/T 151-2008 Technical Criterions for Building Window Film CAS 142-2007 Technical specification for energy-efficient windows film installation on construction glass DBJ/T 15-66-2009 2 Luminous reflectance of visible light 1 Glass in building 3 Defilade modulus 310.01 Determination of light transmittance,solar direct transmittance,total solar energy transmittance and ultraviolet transmittance for glass in building and related glazing factors GB/T2680-1994 Calculation specification for thermal performance of windows,doors and glass curtain-walls JGJ/T 151-2008 Technical Criterions for Building Window Film CAS 142-2007 Technical specification for energy-efficient windows film installation on construction glass DBJ/T 15-66-2009 4 Transmissivity of visible light 1 Glass in building 5 Luminous reflectance of visible light 310.01 Determination of light transmittance,solar direct transmittance,total solar energy transmittance and ultraviolet transmittance for glass in building and related glazing factors GB/T2680-1994 Calculation specification for thermal performance of windows,doors and glass curtain-walls JGJ/T 151-2008 Technical Criterions for Building Window Film CAS 142-2007 Technical specification for energy-efficient windows film installation on construction glass DBJ/T 15-66-2009 6 Absorptance of straight sun's rays 1 Glass in building 7 Total transmissivity of solar 310.01 Determination of light transmittance,solar direct transmittance,total solar energy transmittance and ultraviolet transmittance for glass in building and related glazing factors GB/T2680-1994 Calculation specification for thermal performance of windows,doors and glass curtain-walls JGJ/T 151-2008 Technical Criterions for Building Window Film CAS 142-2007 Technical specification for energy-efficient windows film installation on construction glass DBJ/T 15-66-2009 8 Glass hemispherical emmisivity 1 Glass in building 9 Thermail transmittance 310.01 Calculation and determination of steady-state U values (thermal transmittance) of multiple glazing GB/T22476-2008 Calculation specification for thermal performance of windows,doors and glass curtain-walls JGJ/T151-2008 中国合格评定国家认可委员会 认可证书附件(注册号:CNAS L0931) 名称: 深圳市建筑科学研究院股份有限公司 地址:深圳市光明新区光明街同富裕工业园内俊伟兴厂区B栋1楼 签发日期:2012年01月18日 有效期至:2015年01月17日 更新日期:2012年01月18日 附件3 认可的授权签字人及领域 序号 姓名授权签字领域 备注1叶青全部检测项目 2 刘俊跃 太阳能应用系统、建筑节能、通风与空调工程、建筑光环境检测项目 3 王莹 建筑门窗、幕墙检测项目 4 罗刚建筑门窗、幕墙检测项目 5 陈孟辉 建筑门窗、幕墙检测项目 6 马晓雯 太阳能应用系统、建筑节能、通风与空调工程、建筑光环境检测项目 CHINA NATIONAL ACCREDITATION SERVICE FOR CONFORMITY ASSESSMENT APPENDIX OF ACCREDITATION CERTIFICATE (Registration No. CNAS L0931) NAME:Shenzhen Institute of Building Research Co., Ltd. ADDRESS:F1, Building B, Junweixing Factory Zone, Tongfuyu Industry Park, Guangming Block, Guangming New District, Shenzhen, Guangdong, China Date of Issue:2012-01-18 Date of Expiry:2015-01-17 Date of Update:2012-01-18 APPENDIX 3 ACCREDITED SIGNATORIES AND SCOPE № Name Authorized Scope of Signature Note 1 Ye Qing Authorized all testing items. 2 Liu Junyue Authorized testing items for Solar energy application system, building energy efficiency, air-conditioning and ventilation enggineering, building optical environment. 3 Wang Ying Authorized testing items for doors and windows,curtain walls. 4 Luo Gang Authorized testing items for doors and windows,curtain walls. 5 Chen Menghui Authorized testing items for doors and windows,curtain walls. 6 Ma Xiaowen Authorized testing items for Solar energy application system, building energy efficiency, air-conditioning and ventilation enggineering, building optical environment. 中国合格评定国家认可委员会 认可证书附件(注册号:CNAS L0931) 名称: 深圳市建筑科学研究院股份有限公司 地址:广东省深圳市光明新区光明街道同富裕工业园内俊伟兴厂区B栋 1楼 签发日期:2012年01月18日 有效期至:2015年01月17日 更新日期:2013年02月16日 附件1 认可的授权签字人及领域 序号 姓名授权签字领域 备注1叶青 全部检测项目 2 刘俊跃 太阳能应用系统、建筑节能、通风与空调工程、建筑光环境检测项目 3 王莹 建筑门窗、幕墙检测项目、玻璃 4 罗刚 建筑门窗、幕墙检测项目 5 陈孟辉 建筑门窗、幕墙检测项目 6 马晓雯 太阳能应用系统、建筑节能、通风与空调工程、建筑光环境检测项目、玻璃检测项目 7 任俊 全部检测项目 CHINA NATIONAL ACCREDITATION SERVICE FOR CONFORMITY ASSESSMENT APPENDIX OF ACCREDITATION CERTIFICATE (Registration No. CNAS L0931) NAME:Shenzhen Institute of Building Research Co., Ltd. ADDRESS:1/F., Building B, Junweixing Factory, Tongfuyu Industry Park, Guangming Street, Guangming New District, Shenzhen, Guangdong, China Date of Issue:2012-01-18 Date of Expiry:2015-01-17 Date of Update:2013-02-16 APPENDIX 1 ACCREDITED SIGNATORIES AND SCOPE № Name Authorized Scope of Signature Note 1 Ye Qing Authorized all testing items. 2 Liu Junyue Authorized testing items for Solar energy application system, building energy efficiency, air-conditioning and ventilation enggineering, building optical environment. 3 Wang Ying Authorized testing items for doors and windows,curtain walls,Glass. 4 Luo Gang Authorized testing items for doors and windows,curtain walls. 5 Chen Menghui Authorized testing items for doors and windows,curtain walls. 6 Ma Xiaowen Authorized testing items for Solar energy application system, building energy efficiency, air-conditioning and ventilation enggineering, building optical environment,Glass. 7 Ren jun All test items 中国合格评定国家认可委员会 认可证书附件(注册号:CNAS L0931) 名称: 深圳市建筑科学研究院股份有限公司 地址:广东省深圳市光明新区光明街道同富裕工业园内俊伟兴厂区B栋 1楼 认可依据:ISO/IEC 17025:2005以及CNAS特定认可要求 签发日期:2012年01月18日 有效期至:2015年01月17日 更新日期:2013年11月21日 附件2 认可的检测能力范围 序号 检测 对象 项目/参数 领域 代码 检测标准(方法)名称及编号(含年号) 限制 范围 说明 序号 名称 一 太阳能应用系统 1 太阳能集热器 1 平板型太阳集热器热性能 1515 平板型太阳能集热器 GB/T 6424-2007 2 真空管太阳集热器热性能 真空管型太阳能集热器 GB/T 17581-2007 3 全玻璃真空太阳集热管热性能 全玻璃真空太阳集热管GB/T17049-2005 2 家用太阳热水器 1 家用太阳热水器热性能 1515 家用太阳热水系统热性能试验方法 GB/T18708-2002 3 太阳热水系统 1 太阳辐照量 1515 太阳热水系统性能评定规范 GB/T 20095-2006 太阳能热水系统设计、安装及工程验收技术规范 GB/T18713-2002 2 温度 3 风速 4 时间 5 质量 6 长度 7 压力 4 (晶体硅、薄膜)光伏组件 1 开路电压 1515 地面用晶体硅光伏组件设计鉴定和定型GB/T9535-1998 晶体硅地表光伏电池组件.设计质量和型式批准 IEC 61215:2005 2 短路电流 3 最佳工作电压 4 最佳工作电流 5 最大功率 5 家用太阳能光伏系统 1 输出频率稳定度 1515 家用太阳能光伏系统 第1部分:技术条件 NY/T1146.1-2006 2 输出电压调整率 家用太阳能光伏系统 第2部分:试验方法 NY/T1146.2-2006 5 家用太阳能光伏系统 3 输出波形失真度 1515 家用太阳能光伏系统 第2部分:试验方法 NY/T1146.2-2006 二 节能检测 1 围护结构热工性能 1 墙体传热系数 1017 建筑构件稳态热传递性质的测定标定和防护热箱法 GB/T13475—2008 只用防护热箱法 2 热反射隔热涂料 1 太阳反射比 0215 建筑外表面用热反射隔热涂料JC/T 1040-2007 航天热控涂层试验方法 第2部分:太阳吸收比测试 GJB2502.2-2006 2 半球发射率 航天热控涂层试验方法 第3部分:太阳发射率测试 GJB2502.3-2006 3 太阳辐射吸收系数 航天热控涂层试验方法 第2部分:太阳吸收比测试 GJB2502.2-2006 三 建筑门窗、幕墙 1 门、窗1传热系数 0327 建筑外门窗保温性能分级及检测方法 GB/T 8484-2008 2 抗风压性能 建筑外门窗气密、水密、抗风压性能分级及检测方法 GB/T 7106-2008 3 气密性能 4 水密性能 5 外观 铝及铝合金阳极氧化膜检测方法 第6部分:目视观察法检验着色阳极氧化膜色差和外观质量 GB/T 12967.6-2008 1 门、窗6尺寸 0327 铝合金门窗 GB/T8478-2008 7 构造 8 装配质量 9 锁紧器开关力 未增塑聚氯乙烯(PVC-U)塑料门窗力学性能及耐候性能试验方法GB/T11793-2008 10 悬端吊重 11 翘曲或弯曲变形 12 扭曲变形 13 对角线变形 14 撑挡试验 15 开启限位器试验 16 大力关闭试验 17 启闭力 建筑用窗承受机械力的检测方法 GB/T9158-1998 18 反复启闭性能 建筑门窗反复启闭性能检测方法 JG/T192-2006 19 抗风压性能现场检测 建筑外窗气密、水密、抗风压性能现场检测方法JG/T211-2007 20 气密性能现场检测 21 水密性能现场检测 2 建筑幕墙 1 气密性能 1017 建筑幕墙气密、水密、抗风压性能检测方法 GB/T 15227-2007 2 抗风压性能 2 建筑幕墙 3 水密性能 1017 建筑幕墙气密、水密、抗风压性能检测方法 GB/T 15227-2007 4 平面内变形 建筑幕墙平面内变形性能检测方法 GB/T 18250-2000 四 通风与空调工程 1 风机盘管 1 风量 0343.04 风机盘管机组 GB/T 19232-2003 柜式风机盘管机组 JB/T 9066-1999 立柱式风机盘管机组 JB/T 6415-1992 2 输入功率 3 供冷量 4 供热量 5 水量和水阻 6 出口静压 风机盘管机组 GB/T 19232-2003 柜式风机盘管机组 JB/T 9066-1999 7 噪声 风机盘管机组 GB/T 19232-2003 柜式风机盘管机组 JB/T 9066-1999 立柱式风机盘管机组 JB/T 6415-1992 2 多联式空调(热泵)机组 1 室内机制冷量 0343.04 多联式空调(热泵)机组 GB/T 18837-2002 2 室内机消耗功率 2 多联式空调(热泵)机组 3 制冷量 0343.04 多联式空调(热泵)机组 GB/T 18837-2002 4 制冷消耗功率 5 室内机制热量 6 制热量 7 制热消耗功率 8 电热装置制热消耗功率 9 噪声 10 机组的分流不平衡率 11 综合制冷性能系数 多联式空调(热泵)机组 GB/T 18837-2002 多联式空调(热泵)机组能效限定值及能源效率等级 GB21454-2008 12 综合制热性能系数 五 建筑光环境 1 灯和灯系统 1 光通量 0328 白炽灯泡光电参数的测量方法 GB/T 15043-2008 单端荧光灯 性能要求 GB/T 17262-2002 普通照明用自镇流荧光灯 性能要求GB/T17263-2002 双端荧光灯 性能要求GB/T10682-2010 放电灯(荧光灯除外)特性测量方法 GB/T 13434-2008 1 灯和灯系统 2 光效 0328 普通照明用双端荧光灯能效限定值及能效等级 GB19043-2013 普通照明用自镇流荧光灯能效限定值及能效等级 GB19044-2013 高压钠灯能效限定值及能效等级GB19573-2004 放电灯(荧光灯除外)特性测量方法 GB/T13434-2008 3 光生物安全性 灯和灯系统的光生物安全性 GB/T 20145-2006 4 谐波含量限值 电磁兼容 限值 谐波电流发射限值(设备每相输入电流≤16A) GB 17625.1-2012 建筑节能工程施工质量验收规范 GB 50411-2007 建筑节能工程施工验收规范 SZJG 31-2010 2 灯具 1 灯具效率 0328 灯具分布光度测量的一般要求GB/T 9468-2008 3 镇流器 1 镇流器能效因数(流明系数、能效限定值、镇流器效率) 0328 高压钠灯用镇流器能效限定值及节能评价值 GB 19574-2004 管形荧光灯镇流器能效限定值及能效等级 GB 17896-2012 金属卤化物灯用镇流器能效限定值及能效等级 GB 20053-2006 六 玻璃 1 建筑玻璃 1 可见光透射比 0310.01 建筑玻璃 可见光透射比,太阳光直接透射比、太阳能总透射比、紫外线透射比及有关窗玻璃参数的测定 GB/T2680-1994 建筑门窗幕墙热工计算规程JGJ/T151-2008 建筑玻璃窗膜技术规范 CAS142-2007 广东省建筑门窗幕墙玻璃贴膜节能技术规程 DBJ/T15-66-2009 2 可见光反射比 3 玻璃遮阳系数 4 太阳光透射比 5 太阳光反射比 1 建筑玻璃 6 太阳光吸收比 0310.01 建筑玻璃 可见光透射比,太阳光直接透射比、太阳能总透射比、紫外线透射比及有关窗玻璃参数的测定 GB/T2680-1994 建筑门窗幕墙热工计算规程JGJ/T151-2008 建筑玻璃窗膜技术规范 CAS142-2007 广东省建筑门窗幕墙玻璃贴膜节能技术规程 DBJ/T15-66-2009 7 太阳能总透射比 8 玻璃半球发射率 9 传热系数 中空玻璃稳态U值(传热系数)的计算及测定GB/T22476-2008 建筑门窗幕墙热工计算规程JGJ/T151-2008 CHINA NATIONAL ACCREDITATION SERVICE FOR CONFORMITY ASSESSMENT APPENDIX OF ACCREDITATION CERTIFICATE (Registration No. CNAS L0931) NAME:Shenzhen Institute of Building Research Co., Ltd. ADDRESS:1/F., Building B, Junweixing Factory, Tongfuyu Industry Park, Guangming Street, Guangming New District, Shenzhen, Guangdong, China Accreditation Criteria:ISO/IEC 17025:2005 and relevant requirements of CNAS Date of Issue:2012-01-18 Date of Expiry:2015-01-17 Date of Update:2013-11-21 APPENDIX 2 ACCREDITED TESTING № Test Object Item/Parameter Code of Field Title, Code of Standard or Method Limitation Note № Item/ Parameter Ⅰ The solar utility system 1 The solarcollector 1 The thermal performance of flat plate solar collectors 1515 Flat plate solar collectors GB/T 6424-2007 2 The thermal performance of vacuum-tube solar collectors Evacuated tube solar collectors GB/T 17581-2007 1 The solarcollector 3 The thermal performance of all-glass vacuum solar collectors 1515 All-glass evacuated solar collector tubes GB/T17049-2005 2 Domestic solar water heaters 1 The test for the thermal performance of the domestic solar water heater 1515 Test methods for thermal performance of domestic solar water heating systems GB/T18708-2002 3 The solar hot-water system 1 The solar radiant exposure 1515 Assessment code for performance of solar water heating systems GB/T 20095-2006 Solar water heating systems--design,installation and engineering acceptance GB/T18713-2002 2 Temperature 3 wind speed 4 Time 5 Weight 6 length 7 pressure 4 (Crystalline silicon、Thin film )photovoltaic(PV) modules 1 Open-circuit voltage 1515 Crystalline silicon terrestrial photovoltaic(PV)modules-design qualification and type approval GB/T9535-1998 Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval IEC 61215:2005 2 Short-circuit current 3 Optimum operating voltage 4 Optimum operating current 5 Maximum power 5 Domestic solar photovoltaic system 1 Output frequency stability 1515 Solar energy PV generation system for household Part 1:Technical condition NY/T1146.1-2006 2 Output voltage regulation Solar energy PV generation system for household Part 2: Test method NY/T1146.2-2006 5 Domestic solar photovoltaic system 3 Output waveform distortion 1515 Solar energy PV generation system for household Part 2: Test method NY/T1146.2-2006 Ⅱ Energy Efficiency Test 1 The thermal performance of exterior-protected construction 1 The heat-transfor coefficient of wall 1017 Building element-Determinatin of steady-state thermal transmission properties-Calibrated and guarded hot box GB/T13475—2008 Accredited only for: guarded hot box method 2 Reflective thermalInsulating coating 1 Solarreflectance rate 0215 Reflective thermalInsulating coating for outside of building JC/T1040-2007 Test method for thermal control coatings of spacecraft Part 2:Measurement of solar absorptance GJB2502.2-2006 2 Hemispherical emmisivity Test method for thermal control coatings of spacecraft Part 3:Measurement of emissivity GJB2502.3-2006 2 Reflective thermalInsulating coating 3 solar radiation absorption coefficient 0215 Test method for thermal control coatings of spacecraft Part 2:Measurement of solar absorptance GJB2502.2-2006 Ⅲ Building doors and windows/Curtain walls 1 doors and windows 1 Heat transfer coefficient 0327 Graduation and test method for thermal insulating properties of doors and windows GB/T 8484—2008 2 Wind resistance performance Graduations and test methods of air permeability, watertightness, wind load resistance performance for building external windows and doors GB/T 7106-2008 3 Air permeability performance 4 Water tightness performance 1 doors and windows 5 Appearance 0327 Test Methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 6:Determination of color differences and appearance of colored anodic oxide films by viewing method GB/T 12967.6-2008 6 Size deviation Aluminium windows and doors GB/T 8478-2008 7 structure 8 assembly quality 9 Locking power switch Test methods on mechanical and weathering properties for unplasticized polyvinyl chloride (PVC-U) doors and windows GB/T 11793-2008 10 Suspension load 11 Warping/ Bending test 12 Torsion performance 1 doors and windows 13 Diagonal deformation 0327 Test methods on mechanical and weathering properties for unplasticized polyvinyl chloride (PVC-U) doors and windows GB/T 11793-2008 14 Support block test 15 Open limit switch test 16 Strong off test 17 Opening and Mechanical test methods windows GB/T 9158-1998 18 Repeat switch Test method for reqpeated opening and closing performance of windows and doors JG/T 192-2006 19 Field testof wind load resistance performance Field test method of air permeability,watertightness,wind load resistance performance for exterior windows JG/T211-2007 1 doors and windows 20 Field test of air permeability, Field test method of air permeability,watertightness,wind load resistance performance for exterior windows JG/T211-2007 21 Field test of watertightness, 2 curtain walls 1 Air permeability performance 1017 Test method of air permeability,waterightness,wind load resistance performance for curtain walls GB/T 15227-2007 2 Wind resistance performance 3 Water tightness performance 4 In plane deformation Test method for performance in plane deformation of curtain wall GB/T 18250-2000 Ⅳ Ventilating and air-condit-ionEngineer-ing 1 Fan coil unit 1 Blast volume 0343.04 Fan-coil unit GB/T 19232-2003 Cabinet type fan coil unit JB/T 9066-1999 Pillar type fan coil unit JB/T 6415-1992 2 Input power 3 Supply cooling load 4 Heating load 5 Water flowmeter and hydraulic drag 6 Outlet static pressure Fan-coil unit GB/T 19232-2003 Cabinet type fan coil unit JB/T 9066-1999 7 Noise Fan-coil unit GB/T 19232-2003 Cabinet type fan coil unit JB/T 9066-1999 Pillar type fan coil unit JB/T 6415-1992 2 Multi-connected air-condition (heat pump) unit 1 refrigerating capacity of indoor machine 0343.04 Multi-connected air-condition (heat pump) unit GB/T 18837-2002 2 Multi-connected air-condition (heat pump) unit 2 consumed power of indoor machine 0343.04 Multi-connected air-condition (heat pump) unit GB/T 18837-2002 3 refrigerating capacity 4 refrigerating consumed power 5 heating capacity of indoor machine 6 heating capacity 7 heating consumed power 8 heating consumed power of electric heating apparatus 9 noise 10 distributary disequilibrium rate of multi-connected air-condition (heat pump) unit 2 Multi-connected air-condition (heat pump) unit 11 refrigerating integrated part load value 0343.04 Multi-connected air-condition (heat pump) unit GB/T 18837-2002 The minimum allowable values of the IPLV and energy efficiency grades for multi-connected air-condition(heat pump) unit GB 21454-2008 12 heating integrated part load value Ⅴ Optical environ-Ment of building 1 Lamps and lamp systems 1 Luminous flux 0328 Method of measuring electrical and photometric characteristics for incandescent lamps GB/T 15043-2008 Single-capped fluorescent lamps-Performance requirements GB/T 17262-2011 Self-ballasted lamps for general lighting service-Performance requirements GB/T17263-2002 Double-capped fluorescent lamps - Performance specifications GB/T10682-2010 Methods of measuring characteristics for dischargelamps (excluding fluorescent lamps) GB/T 13434 -2008 1 Lamps and lamp systems 2 Luminousefficiency 0328 Limited values of energy efficiency and rating criteria of double-capped fluorescent lamps for general lighting service GB19043-2013 Limited values of energy efficiency and rating criteria of self-ballasted fluorescent lamps for general lighting service GB19044-2013 Limited values of energy efficiency and rating criteria for high-pressure sodium vapour lamps GB19573-2004 Methods of measuring characteristics for discharge lamps (excluding fluorescent lamps) GB/T 13434 -2008 3 Photobiological safety Photobiological safety of lamps and lamp systems GB/T 20145-2006 1 Lamps and lamp systems 4 Compatibility-Limits-Limits for Harmonic Content Electromagnetic Compatibility-Limits-Limits for Harmonic Current Emissions (equipment input current≤16A per phase) GB 17625.1-2012 Code for acceptance of energy efficient building construction GB 50411-2007 Code for acceptance of energy efficient building construction SZJG 31-2010 2 Lamps and lamp systems 1 Efficiency of lamp 0328 General requirements for the photometry and goniophotometry of luminaries GB/T 9468-2008 3 Luminaire Ballast 1 Luminaire efficiency BEF(ballast lumen factor,minimum allowable values of energy efficiency,efficiency of? a ballast) 0328 Limited values of energy efficiency and evaluating values of energy conservation of ballast for high-pressure sodium lamps GB 19574-2004 Mininum allowable values of energy efficiency and energy efficiency grades of balasts for tubular fluorescent lamps GB 17896-2012 The minimum allowable values of energy efficiency and the energy efficiency grades for ballast of metal-halide lamps GB 20053-2006 Ⅵ Glass 1 Glass in building 1 Transmissivity of visible light 0310.01 Determination of light transmittance,solar direct transmittance,total solar energy transmittance and ultraviolet transmittance for glass in building and related glazing factors GB/T2680-1994 Calculation specification for thermal performance of windows,doors and glass curtain-walls JGJ/T 151-2008 Technical Criterions for Building Window Film CAS 142-2007 Technical specification for energy-efficient windows film installation on construction glass DBJ/T 15-66-2009 2 Luminous reflectance of visible light 1 Glass in building 3 Defilade modulus 0310.01 Determination of light transmittance,solar direct transmittance,total solar energy transmittance and ultraviolet transmittance for glass in building and related glazing factors GB/T2680-1994 Calculation specification for thermal performance of windows,doors and glass curtain-walls JGJ/T 151-2008 Technical Criterions for Building Window Film CAS 142-2007 Technical specification for energy-efficient windows film installation on construction glass DBJ/T 15-66-2009 4 Transmissivity of visible light 1 Glass in building 5 Luminous reflectance of visible light 0310.01 Determination of light transmittance,solar direct transmittance,total solar energy transmittance and ultraviolet transmittance for glass in building and related glazing factors GB/T2680-1994 Calculation specification for thermal performance of windows,doors and glass curtain-walls JGJ/T 151-2008 Technical Criterions for Building Window Film CAS 142-2007 Technical specification for energy-efficient windows film installation on construction glass DBJ/T 15-66-2009 6 Absorptance of straight sun's rays 1 Glass in building 7 Total transmissivity of solar 0310.01 Determination of light transmittance,solar direct transmittance,total solar energy transmittance and ultraviolet transmittance for glass in building and related glazing factors GB/T2680-1994 Calculation specification for thermal performance of windows,doors and glass curtain-walls JGJ/T 151-2008 Technical Criterions for Building Window Film CAS 142-2007 Technical specification for energy-efficient windows film installation on construction glass DBJ/T 15-66-2009 8 Glass hemispherical emmisivity 1 Glass in building 9 Thermail transmittance 0310.01 Calculation and determination of steady-state U values (thermal transmittance) of multiple glazing GB/T22476-2008 Calculation specificationfor thermal performance of windows,doors and glass curtain-walls JGJ/T151-2008 中国合格评定国家认可委员会 认可证书附件(注册号:CNAS L0931) 名称: 深圳市建筑科学研究院股份有限公司 地址:广东省深圳市福田区上梅林梅坳三路29号 签发日期:2012年01月18日 有效期至:2015年01月17日 更新日期:2013年11月21日 附件1 认可的授权签字人及领域 序号 姓名授权签字领域 备注1叶青全部检测项目(不包括钢结构焊缝无损探伤检测项目) 2 陈泽广 地基与基础工程、主体结构工程、钢结构工程(不包括钢结构焊缝无损探伤检测项目)、建筑物检测项目 3 刘俊跃 太阳能应用系统、红外热成像、建筑节能、建筑声环境、通风与空调工程、建筑光环境检测项目 4 王莹 混凝土结构材料、砌体结构材料、砂浆、金属结构材料及其制品/焊接件、预制混凝土构配件、装饰装修材料、防水材料、嵌缝密封材料、胶粘剂、管网材料、保温吸声材料、道桥材料、玻璃、电气材料、水质、幕墙及门窗/型材检测项目、空气质量、材料污染物检测项目、后置埋件、饰面砖拉拔、碳纤维片材拉拔、抹灰砂浆粘结强度、粘钢板拉拔检测项目. 5 罗刚混凝土结构材料、砌体结构材料、砂浆、金属结构材料及其制品/焊接件、预制混凝土构配件、装饰装修材料、防水材料、嵌缝密封材料、胶粘剂、管网材料、保温吸声材料、玻璃、电气材料、幕墙及门窗/型材检测项目、后置埋件、饰面砖拉拔、碳纤维片材拉拔、抹灰砂浆粘结强度、粘钢板拉拔检测项目. 6 郭志坚 空气质量、材料污染物检测项目、水质测定检测项目. 7 刘勇 电气工程检测项目 8 陈孟辉 地基与基础工程、主体结构工程、钢结构工程(不包括钢结构焊缝无损探伤检测项目)、建筑物、混凝土结构材料、砌体结构材料、砂浆、金属结构材料及其制品/焊接件、预制混凝土构配件、装饰装修材料、防水材料、嵌缝密封材料、胶粘剂、管网材料、保温吸声材料、道桥材料、玻璃、幕墙及门窗/型材、道路工程检测项目 9 汪四新 地基与基础工程、主体结构工程、钢结构工程(不包括钢结构焊缝无损探伤检测项目)、建筑物、道路工程检测项目 10 吕志军 地基与基础工程、主体结构工程、钢结构工程(不包括钢结构焊缝无损探伤检测项目)、建筑物、道路工程检测项目 11 唐圣锋 钢结构焊缝无损探伤检测项目 12 马晓雯 太阳能应用系统、红外热成像、建筑节能、建筑声环境、通风与空调工程、建筑光环境检测项目、电气工程检测项目、玻璃检测项目 13 任俊 全部检测项目(不包括钢结构焊缝无损探伤检测项目) 14 兰天胜 钢结构工程 CHINA NATIONAL ACCREDITATION SERVICE FOR CONFORMITY ASSESSMENT APPENDIX OF ACCREDITATION CERTIFICATE (Registration No. CNAS L0931) NAME:Shenzhen Institute of Building Research Co., Ltd. ADDRESS:No.29, Mei'ao 3rd Road, Upper Meilin, Futian District, Shenzhen, Guangdong, China Date of Issue:2012-01-18 Date of Expiry:2015-01-17 Date of Update:2013-11-21 APPENDIX 1 ACCREDITED SIGNATORIES AND SCOPE № Name Authorized Scope of Signature Note 1 Ye Qing Authorized testing items except for non-destroy detection of welding line. 2 Chen Zeguang Authorized testing items for Base and foundation engineering, main body structure engineering, steel structure engineering except for non-destroy detection of welding line,building. 3 Liu Junyue Authorized testing items for Solar energy application system, diagnoses of infrared thermal imagery, building energy efficiency, building acoustic environment, air-conditioning and ventilation enggineering, building optical environment. 4 Wang Ying Authorized testing items for Concrete structure materials, masonry structure materials, mortar, metallic materials, metal products and weldments, precast concrete unit, decorating and refurbishing materials, waterproof materials, joint sealing material, adhesive, pipe, thermal insulation materials and sound absorption materials, road and bridge materials, glass, electrical materials, water quality,curtain walls, doors, windows and their materials of buildings,air quality and pollutants of materials.,built-in fitting,Tapestry Brick,Carbon fiber sheet,Plastering mortar bond strength、Plate Sticking Pullout . 5 Luo Gang Authorized testing items for Concrete structure materials, masonry structure materials, mortar, metallic materials, metal products and weldments, precast concrete unit, decorating and refurbishing materials, waterproof materials, joint sealing material, adhesive, pipe, thermal insulation materials and sound absorption materials, glass, electrical materials, curtain walls, doors, windows and their materials of buildings.,built-in fitting,Tapestry Brick,Carbon fiber sheet,Plastering mortar bond strength、Plate Sticking Pullout . 6 Guo Zhijian Authorized testing items for air quality ,pollutants of materials and water quality? 7 Liu Yong Authorized testing items for electrical engineering. 8 Chen Menghui Authorized testing items for Base and foundation engineering, main body structure engineering, steel structure engineering except for non-destroy detection of welding line,building,concrete structure material, masonry structure materials, mortar,metallic material, metal products and weldments, precast concrete unit, decorating and refurbishing materials, waterproof materials,joint sealing materials, adhesive, pipe, thermal insulation materials and sound absorption materials, road and bridge materials,glass,curtain walls, doors, windows and their materials of buildings,highway engineering. 9 Wang sixin Authorized testing items for Base and foundation engineering, main body structure engineering, steel structure engineering except for non-destroy detection of welding line,building, highway engineering. 10 Lv zhijun Authorized testing items for Base and foundation engineering, main body structure engineering, steel structure engineering except for non-destroy detection of welding line,building, highway engineering. 11 Tang sheng feng Authorized testing items for Steel structure welding line non-destroy detection. 12 Ma xiaowen Authorized testing items for Solar energy application system, diagnoses of infrared thermal imagery, building energy efficiency, building acoustic environment, air- conditioning and ventilation enggineering, building optical environment test items, electrical engineering.,Glass 13 Ren jun Authorized testing items except for non-destroy detection of welding line. 14 Lan tiansheng steel structure engineering 中国合格评定国家认可委员会 认可证书附件(注册号:CNAS L0931) 名称: 深圳市建筑科学研究院股份有限公司 地址:广东省深圳市福田区上梅林梅坳三路29号 认可依据:ISO/IEC 17025:2005以及CNAS特定认可要求 签发日期:2012年01月18日 有效期至:2015年01月17日 更新日期:2013年11月21日 附件2 认可的检测能力范围 序号 检测 对象 项目/参数 领域 代码 检测标准(方法)名称及编号(含年号) 限制 范围 说明 序号 名称 一 混凝土结构材料 1 水泥 1 凝结时间 1001 水泥标准稠度用水量、凝结时间、安定性检验方法 GB/T1346-2011 2 安定性 3 水泥标准稠度用水量 1 水泥 4 细度 1001 水泥细度检验方法 筛析法GB1345-2005 水泥比表面积测定方法 勃氏法 GB/T8074-2008 5 胶砂强度(ISO法) 水泥胶砂强度检验方法 (IS0法) GB/T17671-1999 6 胶砂强度(快速法) 水泥强度快速检验方法 JC/T738-2004 7 胶砂流动度 水泥胶砂流动度测定方法 GB/T2419-2005 8 密度 水泥密度测定方法 GB/T208-1994 9 烧失量 水泥化学分析方法 GB/T176-2008 10 硫酸盐和三氧化硫 11 氧化钾和氧化钠 2 通用硅酸盐水泥 部分参数 1001 通用硅酸盐水泥GB175-2007 只测:凝结时间、安定性、水泥标准稠度用水量、细度、胶砂强度(IS0法)、胶砂强度(快速法)、胶砂流动度、密度、烧失量、硫酸盐和三氧化硫、氧化钾和氧化钠 3 白色硅酸盐水泥 部分参数 1001 白色硅酸盐水泥GB2015-2005 只测:凝结时间、安定性、水泥标准稠度用水量、细度、胶砂强度(IS0法)、氧化钾和氧化钠 4 砌筑水泥 部分参数 1001 砌筑水泥GB/T 3183-2003 只测:凝结时间、安定性、水泥标准稠度用水量、细度、胶砂强度(IS0法)、氧化钾和氧化钠 5 砂1筛分析/颗粒级配 1006 普通混凝土用砂、石质量及检验方法标准JGJ52-2006 2 表观密度 3 堆积密度 4 紧密密度 5 含泥量 6 泥块含量 5 砂7石粉含量 1006 普通混凝土用砂、石质量及检验方法标准JGJ52-2006 8 吸水率 9 含水率 10 氯离子 11 有机物含量 12 云母含量 13 碱活性 14 坚固性 15 轻物质含量 16 硫酸盐及硫化物含量 6 石1筛分析/颗粒级配 1006 普通混凝土用砂、石质量及检验方法标准 JGJ52-2006 2 表观密度 3 堆积密度 4 紧密密度 5 含泥量 6 泥块含量 7 含水率 8 吸水率 9 有机物含量 10 坚固性 11 针片状颗粒总含量 12 硫酸盐及硫化物含量 6 石13 岩石抗压强度 1006 普通混凝土用砂、石质量及检验方法标准JGJ52-2006 工程岩体试验方法标准 GB/T 50266-2013 14 压碎指标 普通混凝土用砂、石质量及检验方法标准JGJ52-2006 15 碱活性/碱集料反应 16 山皮水锈颗粒含量 水运工程混凝土施工规范 JTS 202-2011 7 混凝土用轻集料 1 筛分析/颗粒级配 1006 轻集料及其试验方法 第2部分:轻集料试验方法 GB/T 17431.2-2010 2 堆积密度 3 筒压强度 4 吸水率 5 软化系数 6 煮沸质量损失 7 烧失量 8 含泥量 9 硫化物及硫酸盐 8 混凝土拌合用水 1 PH值1016 水质 PH值的测定 玻璃电极法 GB/T 6920-1986 2 不溶物 水质 悬浮物的测定 GB/T 11901-1989 3 可溶物 生活饮用水标准检验法:感官性状和物理指标GB 5750.4-2006 8 混凝土拌合用水 4 氯离子 1016 水质 氯化物的测定 硝酸银滴定法GB/T 11896-1989 5 硫酸盐 水质 硫酸盐的测定 重量法 GB/T 11899-1989 6 碱含量 水泥化学分析方法 GB/T176-2008 7 凝结时间 水泥标准稠度用水量、凝结时间、安定性检验方法 GB/T1346-2011 8 凝结时间差 9 抗压强度比 水泥胶砂强度检验方法 (IS0法)GB/T17671-1999 9 外加剂 1 固含量 1002 混凝土外加剂匀质性试验方法GB/T8077-2012 2 含水率 混凝土外加剂匀质性试验方法GB/T8077-2012 混凝土防冻剂JC 475-2004 3 密度 混凝土外加剂匀质性试验方法GB/T8077-2012 4 氯离子含量 5 水泥净浆流动度 6 水泥砂浆工作性 7 PH值8减水率 混凝土外加剂 GB 8076-2008 9 细度 水泥细度检验方法 筛析法 GB/T 1345-2005 混凝土外加剂匀质性试验方法GB/T8077-2012 9 外加剂 10 硫酸钠 1002 混凝土外加剂匀质性试验方法GB/T8077-2012 11 含气量 普通混凝土拌合物性能试验方法 标准GB/T50080-2002 12 抗冻性 普通砼长期性能和耐久性能试验方法标准 GB/T 50082-2009 13 总碱量 混凝土外加剂匀质性试验方法GB/T8077-2012 水泥化学分析方 GB/T176-2008 9 外加剂 14 凝结时间/凝结时间差 1002 混凝土外加剂 GB8076-2008 水泥标准稠度用水量、凝结时间、安定性检验方法 GB/T1346-2011 喷射混凝土用速凝剂 JC477-2005 建筑砂浆基本性能试验方法标准 JGJ/T70-2009 15 抗压强度比 混凝土外加剂 GB8076-2008 砂浆、混凝土防水剂 JC 474-2008 喷射混凝土用速凝剂 JC477-2005 16 收缩率比 混凝土外加剂 GB8076-2008 砂浆、混凝土防水剂 JC 474-2008 9 外加剂 17 1h经时变化量(坍落度/含气量) 1002 混凝土外加剂 GB 8076-2008 18 常压泌水率比 19 净浆安定性 水泥标准稠度用水量、凝结时间、安定性检验方法 GB/T1346-2011 20 透水压力比 砂浆、混凝土防水剂 JC 474-2008 21 48h吸水量比 22 渗透高度比 23 限制膨胀率 混凝土膨胀剂 GB 23439-2009 24 抗压强度 混凝土膨胀剂 GB 23439-2009 水泥胶砂强度检验方法 GB/T 17671-1999 25 活性指数 高强高性能砼用矿物外加剂GB/T18736-2002 26 需水量比 27 竖向膨胀率 混凝土外加剂应用技术规范 GB50119-2003 10 掺合料 1 细度 1001 用于水泥和混凝土中的粉煤灰GB/T1596-2005 2 需水量比 3 含水量 水泥化学分析方法 GB/T176-2008 4 烧失量 5 三氧化硫 10 掺合料 6 密度 1001 水泥密度测定方法 GB/T208-1994 7 活性指数 用于水泥和混凝土中的粒化高炉矿渣粉 GB/T 18046-2008 8 流动度比 11 普通混凝土 1 坍落度 1002 普通混凝土拌合物性能试验方法 标准GB/T50080-2002 2 拌合物凝结时间 3 拌合物泌水率 4 拌合物表观密度 5 拌合物含气量 6 抗压强度 普通混凝土力学性能试验方法标准GB/T50081-2002 钻芯法检测混凝土强度技术规程 CECS 03:2007 7 受压弹性模量 普通混凝土力学性能试验方法标准GB/T50081-2002 8 抗拉强度 9 抗折强度 10 抗冻性能 普通砼长期性能和耐久性能试验方法标准 GB/T 50082-2009 11 抗渗性能 12 收缩率 11 普通混凝土 13 配合比 1002 普通混凝土配合比设计规程 JGJ 55-2011 14 氯离子 建筑结构检测技术标准 GB/T 50344-2004 15 混凝土电通量 普通混凝土长期性能和耐久性能试验方法标准 GB/T 50082-2009 12 水泥基灌浆材料 1 粒径 1001 水泥基灌浆材料 JC/T986-2005 2 凝结时间 3 泌水率 4 流动度 5 抗压强度 水泥基灌浆材料 JC/T986-2005 混凝土结构工程施工质量验收规范 GB50204-2002(2011年版) 6 竖向膨胀率 水泥基灌浆材料 JC/T986-2005 13 碳纤维片材 1 拉伸强度 1002 定向纤维增强塑料拉伸性能试验方法 GB/T3354-1999 2 拉伸弹性模量 3 拉伸破坏伸长率 二 砌体结构材料 1 砖1尺寸 1009 砌墙砖试验方法 GB/T2542-2012 2 外观 3 吸水率和饱和系数 4 体积密度 砌墙砖试验方法 GB/T2542-2012 5 干燥收缩 6 抗折强度 混凝土路面砖JC/T446-2000 砌墙砖试验方法 GB/T2542-2012 透水砖JC/T945-2005 7 抗压强度 8 耐磨性 无机地面材料耐磨性能试验方法 GB/T12988-2009 9 透水系数 透水砖JC/T945-2005 2 混凝土路缘石 1 抗折强度 1016 混凝土路缘石 JC899-2002 2 抗压强度 3 吸水率 4 外观 5 尺寸 3 砌块 1 尺寸 1009 混凝土小型空心砌块检验方法 GB/T4111-1997 石膏砌块 JC/T698-2010 2 外观 混凝土小型空心砌块检验方法 GB/T4111-1997 3 块体密度/干体积密度 混凝土小型空心砌块检验方法 GB/T4111-1997 蒸压加气混凝土性能试验方法 GB/T 11969-2008 3 砌块 4 空心率 1009 混凝土小型空心砌块检验方法 GB/T4111-1997 5 含水率 混凝土小型空心砌块检验方法 GB/T4111-1997 蒸压加气混凝土性能试验方法 GB/T 11969-2008 6 吸水率 7 抗压强度 8 抗折强度 9 抗渗性能 混凝土小型空心砌块检验方法 GB/T4111-1997 10 干燥收缩 蒸压加气混凝土性能试验方法 GB/T 11969-2008 11 轴心抗压强度 12 劈裂抗拉强度 4 隔墙板 1 外观 1016 混凝土轻质条板 JG/T 350-2011 建筑隔墙用轻质条板 JG/T 169-2005 建筑用金属面绝热夹芯板 GB/T 23932-2009 灰渣混凝土空心隔墙板 GB/T23449-2009 2 尺寸 4 隔墙板 3 抗冲击性能 1016 混凝土轻质条板 JG/T 350-2011 建筑隔墙用轻质条板 JG/T 169-2005 灰渣混凝土空心隔墙板 GB/T23449-2009 4 抗压强度 5 抗弯破坏荷载 6 面密度 7 干燥收缩值 8 吊挂力 4 隔墙板 9 含水率 1016 建筑隔墙用轻质条板 JG/T 169-2005 灰渣混凝土空心隔墙板 GB/T23449-2009 混凝土轻质条板 JG/T 350-2011 10 粘结强度 建筑用金属面绝热夹芯板 GB/T 23932-2009 11 剥离性能 12 抗弯承载力 13 软化系数 混凝土轻质条板 JG/T 350-2011 14 抗冻融 15 抗渗透 16 节点连接承载力 三 砂浆 1 砂浆 1 稠度 1001 建筑砂浆基本性能试验方法标准 JGJ/T 70-2009 预拌砂浆GB/T25181-2010 2 表观密度 3 分层度 建筑砂浆基本性能试验方法标准 JGJ/T 70-2009 4 抗冻性 建筑砂浆基本性能试验方法标准 JGJ/T 70-2009 预拌砂浆GB/T25181-2010 5 保塑时间内稠度损失率 预拌砂浆应用技术规范 SJG12-2010 6 凝结时间 建筑砂浆基本性能试验方法标准 JGJ/T 70-2009 聚合物水泥防水砂浆 JC/T984-2011 预拌砂浆GB/T25181-2010 7 抗压强度 建筑砂浆基本性能试验方法标准 JGJ/T 70-2009 水泥胶砂强度检验方法 GB/T17671-1999 预拌砂浆GB/T25181-2010 聚合物水泥防水砂浆 JC/T 984-2011 1 砂浆 8 抗折强度 1001 水泥胶砂强度检验方法 GB/T17671-1999 聚合物水泥防水砂浆 JC/T 984-2011 1 砂浆 9 尺寸变化率/收缩率 1001 建筑砂浆基本性能试验方法标准 JGJ/T 70-2009 地面用水泥基自流平砂浆 JC/T985-2005 聚合物水泥防水砂浆 JC/T 984-2011 预拌砂浆GB/T25181-2010 10 流动度 水泥胶砂流动度测定方法 GB/T2419-2005 地面用水泥基自流平砂浆 JC/T985-2005 11 保水性/保水率 建筑砂浆基本性能试验方法标准 JGJ/T 70-2009 干混砂浆应用技术规程 DBJ/T15-36-2004 预拌砂浆生产技术规范 SJG11-2010 预拌砂浆应用技术规程 DBJ/T15-37-2004 预拌砂浆应用技术规范 SJG12-2010 预拌砂浆JG/T 230-2007 预拌砂浆GB/T25181-2010 1 砂浆 12 抗渗压力 1001 干混砂浆应用技术规程 DBJ/T15-36-2004 预拌砂浆生产技术规范 SJG11-2010 预拌砂浆应用技术规程 DBJ/T15-37-2004 预拌砂浆应用技术规范 SJG12-2010 聚合物水泥防水砂浆 JC/T984-2011 预拌砂浆GB/T25181-2010 1 砂浆 13 拉伸粘结强度 1001 干混砂浆应用技术规程 DBJ/T15-36-2004 预拌砂浆生产技术规范 SJG11-2010 预拌砂浆应用技术规程 DBJ/T15-37-2004 地面用水泥基自流平砂浆 JC/T985-2005 聚合物水泥防水砂浆 JC/T984-2011 蒸压加气混凝土用砌筑与抹面砂浆 JC890-2001 混凝土界面处理剂JC/T907-2002 预拌砂浆JC/T 230-2007 建筑砂浆基本性能试验方法标准JGJ/T70-2009 预拌砂浆GB/T25181-2010 1 砂浆 14 抗冲击性 1001 地面用水泥基自流平砂浆 JC/T985-2005 15 耐碱性 聚合物水泥防水砂浆 JC/T984-2011 16 耐热性 17 导热系数 蒸压加气混凝土用砌筑与抹面砂浆JC890-2001 18 晾置时间 混凝土界面处理剂 JC/T 907-2002 19 剪切粘结强度 20 砂浆配合比设计 砌筑砂浆配合比设计规程 JGJ 98-2010 21 柔韧性 聚合物水泥防水砂浆 JC/T 984-2011 22 吸水率 2 陶瓷墙地砖填缝剂 1 耐磨损性 1009 陶瓷墙地砖填缝剂 JC/T1004-2006 2 收缩值 3 抗折强度 4 冻融循环后抗折强度 5 抗压强度 6 冻融循环后抗压强度 7 吸水量 3 混凝土地面用水泥基耐磨材料 1 抗折强度 1002 水泥胶砂强度检验方法 GB/T17671-1999 2 抗压强度 3 混凝土地面用水泥基耐磨材料 3 耐磨度比 1002 混凝土及其制品耐磨性试验方法 (滚珠轴承法)GB/T16925-1997 4 表面强度 混凝土地面用水泥基耐磨材料 JC/T906-2002 5 外观 6 骨料含量偏差 四 金属结构材料及其制品/焊接件钢筋/钢材 1 钢筋/钢材 1 屈服强度 0301 0201.01 金属材料 拉伸试验 第1部分:室温试验方法 GB/T 228.1-2010 只用B法2抗拉强度 3 伸长率 金属材料 拉伸试验 第1部分:室温试验方法 GB/T 228.1-2010 钢筋混凝土用钢 第2部分:热轧带肋钢筋 GB 1499.2-2007 钢筋混凝土用钢 第1部分:热轧光圆钢筋 GB 1499.1-2008 4 弯曲 金属材料弯曲试验方法 GB/T232-2010 5 重量偏差 钢筋混凝土用钢 第2部分:热轧带肋钢筋GB1499.2-2007 钢筋混凝土用钢 第1部分:热轧光圆钢筋GB 1499.1-2008 1 钢筋/钢材 6 抗剪强度 0301 0201.01 销剪切试验方法 GB/T13683-1992 7 洛式硬度 金属材料 洛氏硬度试验 第1部分:试验方法(A、B、C、D、E、F、G、H、K、N、T标尺) GB/T 230.1-2009 8 碳含量 钢铁及合金 碳含量的测定 管式炉内燃烧后气体容量法 GB/T 223.69-2008 钢铁 总碳硫含量的测定高频感应炉燃烧后红外吸收法(常规方法) GB/T 20123-2006 9 硫含量 钢铁及合金化学分析方法管式炉内燃烧后碘酸钾滴定法测定硫含量 GB/T223.68-1997 钢铁 总碳硫含量的测定高频感应炉燃烧后红外吸收法(常规方法) GB/T 20123-2006 10 锰含量 钢铁及合金化学分析方法高碘酸钠(钾)光度法测定锰量 GB/T 223.63-1988 11 硅含量 钢铁 酸溶硅和全硅含量的测定 还原型硅钼酸盐分光光度法GB/T223.5-2008 1 钢筋/钢材 12 磷含量 0301 0201.01 钢铁及合金 磷含量的测定 铋磷钼蓝分光光度法和锑磷钼蓝分光光度GB223.59-2008 2 冷轧带肋钢筋 部分参数 0301 0201.01 冷轧带肋钢筋 GB13788-2008 只测:屈服强度、抗拉强度、伸长率、弯曲、重量偏差、碳含量、硫含量、锰含量、硅含量、磷含量 3 钢筋混凝土用钢 热轧带助钢筋 部分参数 0301 0201.01 钢筋混凝土用钢 第2部分:热轧带助钢筋 GB1499.2-2007 只测:屈服强度、抗拉强度、伸长率、弯曲、重量偏差、碳含量、硫含量、锰含量、硅含量、磷含量 4 钢筋混凝土用钢 热轧光圆钢 部分参数 0301 0201.01 钢筋混凝土用钢 第1部分:热轧光圆钢筋 GB 1499.1-2008 只测:屈服强度、抗拉强度、伸长率、弯曲、重量偏差、碳含量、硫含量、锰含量、硅含量、磷含量 5 预应力混凝土用螺纹钢筋 部分参数 0301 0201.01 预应力混凝土用螺纹钢筋GB/T20065-2006 只测:屈服强度、抗拉强度、伸长率、弯曲、重量偏差、碳含量、硫含量、锰含量、硅含量、磷含量 6 冷轧扭钢筋 部分参数 0301 0201.01 冷轧扭钢筋 JG190-2006 只测:屈服强度、抗拉强度、伸长率、弯曲、重量偏差、碳含量、硫含量、锰含量、硅含量、磷含量 7 低合金高强度结构钢 部分参数 0301 0201.01 低合金高强度结构钢 GB/T1591-2008 只测:屈服强度、抗拉强度、伸长率、弯曲、抗剪强度、洛氏硬度、碳含量、硫含量、锰含量、硅含量、磷含量 8 连续热镀锌钢板及钢带 部分参数 0301 0201.01 连续热镀锌钢板及钢带 GB/T 2518-2008 只测:屈服强度、抗拉强度、伸长率、弯曲、抗剪强度、洛氏硬度、碳含量、硫含量、锰含量、硅含量、磷含量 9 优质碳素结构钢 部分参数 0301 0201.01 优质碳素结构钢 GB/T699-1999 只测:屈服强度、抗拉强度、伸长率、弯曲、抗剪强度、洛氏硬度、碳含量、硫含量、锰含量、硅含量、磷含量 10 碳素结构钢 部分参数 0301 0201.01 碳素结构钢 GB/T700-2006 只测:屈服强度、抗拉强度、伸长率、弯曲、抗剪强度、洛氏硬度、碳含量、硫含量、锰含量、硅含量、磷含量 11 彩色涂层钢板及钢带 部分参数 0301 0201.01 彩色涂层钢板及钢带 GB/T 12754-2006 只测:屈服强度、抗拉强度、伸长率、弯曲、抗剪强度、洛氏硬度、碳含量、硫含量、锰含量、硅含量、磷含量 12 预应力混凝土用钢丝 部分参数 0301 0201.01 预应力混凝土用钢丝 GB/T 5223-2002 只测:屈服强度、抗拉强度、伸长率 13 一般用途低碳钢丝 部分参数 0301 0201.01 一般用途低碳钢丝 YB/T 5294-2009 只测:屈服强度、抗拉强度、伸长率 14 钢产品镀锌层 1 镀锌层质量/厚度 0301 钢产品镀锌层质量检验方法 GB/T 1839-2008 金属覆盖层 钢铁制件热浸镀锌层技术要求及试验方法 GB/T13912-2002 15 钢材焊件 1 抗拉强度 0303 焊接接头拉伸试验方法 GB/T2651-2008 2 弯曲 焊接接头弯曲试验方法 GB/T2653-2008 16 钢筋焊接 1 抗拉强度 0323 钢筋焊接接头试验方法标准 JGJ/T 27-2001 钢筋焊接网混凝土结构技术规程JGJ/T114-2003 钢筋混凝土用钢 第3部分:钢筋焊接网 GB/T 1499.3-2010 钢筋焊接及验收规程 JGJ 18-2012 2 弯曲 钢筋焊接接头试验方法标准 JGJ/T 27-2001 钢筋焊接网混凝土结构技术规程 JGJ/T114-2003 钢筋焊接及验收规程 JGJ 18-2012 金属材料弯曲试验方法 GB/T232-2010 16 钢筋焊接 3 抗剪力 0323 钢筋混凝土用钢 第3部分:钢筋焊接网 GB/T 1499.3-2010 17 钢筋机械连接 1 抗拉强度 0323 钢筋机械连接技术规程 JGJ 107-2010 滚轧直螺纹钢筋连接接头 JG 163-2004 镦粗直螺纹钢筋接头JG 171-2005 2 残余变形 钢筋机械连接技术规程 JGJ 107-2010 18 钢绞线、锚夹具 1 抗拉强度 0301 预应力混凝土用钢绞线 GB/T5224-2003(2008) 2 最小破断荷载 3 非比例延伸荷载 4 最大力总伸长率 5 弹性模量 6 洛氏硬度 预应力筋用锚具、夹具和连接器 GB/T 14370-2007 金属材料 洛氏硬度试验 第1部分:试验方法(A、B、C、D、E、F、G、H、K、N、T标尺) GB/T 230.1-2009 19 预应力混凝土用金属波纹管 1 尺寸 0315 预应力混凝土用金属波纹管 JG 225-2007 19 预应力混凝土用金属波纹管 2 外观 0315 预应力混凝土用金属波纹管 JG 225-2007 3 集中荷载下径向刚度 4 均布荷载下径向刚度 5 荷载作用后抗渗漏 6 抗弯曲渗漏 20 钢管脚手架扣件 1 抗拉 0323 钢管脚手架扣件 GB15831-2006 2 抗压 3 抗滑移 4 抗破坏 21 钢制电缆桥架 1 电缆桥架荷载试验 0323 钢制电缆桥架工程设计规范 CECS:31-2006 22 建筑用轻钢龙骨 1 外观质量 0301 建筑用轻钢龙骨 GB/T 11981-2008 2 尺寸 3 静载试验 4 表面防锈 五 预制混凝土构配件 1 预制预应力混凝土楼板 1 承载力 1017 混凝土结构工程施工质量验收规范GB50204-2002(2011) 2 挠度 3 裂缝宽度 2 混凝土和钢筋混凝土排水管 1 外观质量 0339 混凝土和钢筋混凝土排水管试验方法 GB/T 16752-2006 2 几何尺寸 2 混凝土和钢筋混凝土排水管 3 内水压力 0339 混凝土和钢筋混凝土排水管试验方法 GB/T 16752-2006 4 外压荷载 5 保护层厚度 3 混凝土输水管 1 外观质量 0339 混凝土输水管试验方法 GB/T 15345-2003 2 几何尺寸 3 水压试验 4 保护层厚度 4 现浇混凝土空心楼盖内模 1 抗压荷载 1017 现浇混凝土空心楼盖结构技术规程CECS 175-2004 六 装饰装修材料 1 装饰涂料 1 容器中状态 0215 合成树脂乳液外墙涂料 GB/T9755-2001 合成树脂乳液内墙涂料 GB/T9756-2009 溶剂型外墙涂料 GB/T9757-2001 外墙无机建筑涂料 JG/T26-2002 复层建筑涂料GB/T9779-2005 建筑合成树脂乳液砂壁状建筑涂料JG/T 24-2000 建筑内外墙用底漆 JC/T210-2007 弹性建筑涂料JG/T172-2005 交联型氟树脂涂料 HG/T3792-2005 1 装饰涂料 2 施工性/刷涂性 0215 合成树脂乳液外墙涂料 GB/T9755-2001 合成树脂乳液内墙涂料 GB/T9756-2009 溶剂型外墙涂料 GB/T9757-2001 外墙无机建筑涂料 JG/T26-2002 建筑合成树脂乳液砂壁状建筑涂料 JG/T24-2000 建筑内外墙用底漆 JC/T210-2007 弹性建筑涂料 JG/T172-2005 3 涂膜外观 合成树脂乳液外墙涂料 GB/T9755-2001 合成树脂乳液内墙涂料 GB/T9756-2009 溶剂型外墙涂料 GB/T9757-2001 外墙无机建筑涂料 JG/T26-2002 复层建筑涂料 GB/T9779-2005 外墙外保温用环保型硅丙乳液复层涂料JG/T206-2007 建筑内外墙用底漆 JC/T210-2007 弹性建筑涂料 JG/T172-2005 交联型氟树脂涂料 HG/T3792-2005 1 装饰涂料 4 低温稳定性 0215 合成树脂乳液外墙涂料 GB/T9755-2001 合成树脂乳液内墙涂料 GB/T9756-2009 外墙无机建筑涂料 JG/T26-2002 复层建筑涂料 GB/T9779-2005 建筑合成树脂乳液砂壁状建筑涂料JG/T24-2000 建筑内外墙用底漆 JC/T210-2007 弹性建筑涂料 JG/T172-2005 5 对比率 合成树脂乳液外墙涂料 GB/T9755-2001 合成树脂乳液内墙涂料 GB/T9756-2009 溶剂型外墙涂料 GB/T9757-2001 外墙无机建筑涂料 JG/T26-2002 弹性建筑涂料 JG/T172-2005 1 装饰涂料 6 耐沾污性 0215 合成树脂乳液外墙涂料 GB/T9755-2001 溶剂型外墙涂料 GB/T9757-2001 外墙无机建筑涂料 JG/T26-2002 复层建筑涂料 GB/T9779-2005 外墙外保温用环保型硅丙乳液复层涂料JG/T206-2007 弹性建筑涂料 JG/T172-2005 交联型氟树脂涂料 HG/T3792-2005 合成树脂乳液砂壁状建筑涂料JG/T 24-2000 7 干燥时间 漆膜、腻子膜干燥时间测定法 GB/T1728-1979(1989) 8 耐水性 漆膜耐水性测定法 GB/T1733-1993 交联型氟树脂涂料 HG/T3792-2005 9 耐碱性 建筑涂料 涂层耐碱性的测定GB9265-2009 地坪涂料HG/T3829-2006 10 耐洗刷性 建筑涂料 涂层耐洗刷性的测定 GB9266-2009 1 装饰涂料 11 耐温变性/耐冻融循环性 0215 建筑涂料 涂层耐冻融循环性测定法JG/T25-1999 1 装饰涂料 12 初期干燥抗裂性 0215 建筑合成树脂乳液砂壁状建筑涂料JG/T24-2000 复层建筑涂料GB/T9779-2005 13 粘结强度(标准状态、浸水后、冻融循环后) 14 耐冲击性 漆膜耐冲击测定法 GB/T1732-1993 复层建筑涂料 GB/T 9779-2005 15 固体含量/不挥发物含量 色漆、清漆和塑料 不挥发物含量的测定 GB/T 1725-2007 16 柔韧性 漆膜柔韧性测定法 GB/T1731-1993 17 附着力 漆膜附着力测定法GB1720-1979 色漆和清漆 漆膜的划格试验 GB/T9286-1998 18 耐盐水性 漆膜耐化学试剂性测定法 GB/T 1763-1979 地坪涂料HG/T3829-2006 19 遮盖力 涂料遮盖力测定法 GB1726-1979 1 装饰涂料 20 透水性 0215 复层建筑涂料GB/T9779-2005 21 耐磨性 地坪涂料HG/T3829-2006 22 耐酸性 2 防火涂料 1 容器中状态 1508 钢结构防火涂料GB 14907-2002 饰面型防火涂料GB 12441-2005 2 干燥时间 3 初期干燥抗裂性 钢结构防火涂料GB 14907-2002 4 粘结强度 5 耐水性 6 细度 饰面型防火涂料GB 12441-2005 7 附着力 8 柔韧性 9 耐冲击 10 耐湿热性 11 抗压强度 钢结构防火涂料GB 14907-2002 12 干密度 13 耐冷热循环性 3 腻子 1 在容器中状态 0215 建筑室内用腻子 JG/T298-2010 外墙外保温柔性耐水腻子 JG/T 229-2007 建筑外墙用腻子 JG/T 157-2009 3 腻子 2 施工性/刷涂性 0215 建筑外墙用腻子 JG/T 157-2009 建筑室内用腻子 JG/T298-2010 外墙外保温柔性耐水腻子 JG/T 229-2007 3 干燥时间 漆膜、腻子膜干燥时间测定法 GB/T1728-1979(1989) 4 耐水性 漆膜耐水性测定法 GB/T1733-1993 3 腻子 5 耐碱性 0215 建筑涂料 涂层耐碱性的测定 GB9265-2009 6 粘结强度(标准状态、浸水后、冻融循环后) 外墙外保温柔性耐水腻子 JG/T 229-2007 建筑外墙用腻子 JG/T 157-2009 建筑室内用腻子 JG/T298-2010 7 打磨性 建筑室内用腻子 JG/T298-2010 建筑外墙用腻子JG/T 157-2009 外墙外保温柔性耐水腻子 JG/T 229-2007 8 低温储存稳定性 建筑室内用腻子 JG/T298-2010 建筑外墙用腻子JG/T 157-2009 3 腻子 9 动态抗开裂性 0215 建筑外墙用腻子JG/T 157-2009 10 吸水量 建筑外墙用腻子JG/T 157-2009 外墙外保温柔性耐水腻子 JG/T 229-2007 11 腻子膜柔韧性 建筑外墙用腻子JG/T 157-2009 12 柔韧性 建筑室内用腻子JG/T298-2010 4 陶瓷砖 1 尺寸 0309 陶瓷砖试验方法 第2部分:尺寸和表面质量的检验 GB/T 3810.2-2006 2 外观 3 平整度 4 吸水率 陶瓷砖试验方法 第2部分:尺寸和表面质量的检验 GB/T 3810.2-2006 5 抗热震性 陶瓷砖试验方法 第9部分:抗热震性的测定 GB/T 3810.9-2006 陶瓷马赛克 JC 456-2005 6 湿膨胀 陶瓷砖试验方法 第10部分:湿膨胀的测定 GB/T 3810.10-2006 7 耐化学腐蚀性 陶瓷砖试验方法 第13部分:耐化学腐蚀性的测定 GB/T 3810.13-2006 8 断裂模数/破坏强度 陶瓷砖试验方法 第4部分:断裂模数和破坏强度的测定 GB/T 3810.4-2006 4 陶瓷砖 9 抗冻性 0309 陶瓷砖试验方法 第12部分:抗冻性的测定 GB/T 3810.12-2006 10 无釉砖耐磨深度 陶瓷砖试验方法 第6部分:无釉砖耐磨深度的测定 GB/T 3810.6-2006 11 成联质量 陶瓷马赛克JC 456-2005 12 热稳定性 玻璃马赛克GB/T 7697-1996 13 化学稳定性 14 光泽度 建筑饰面材料镜向光泽度测定方法 GB/T13891-2008 5 天然饰面石材 1 外观 0309 天然花岗石建筑板材 GB/T18601-2009 天然大理石建筑板材 GB/T 19766-2005 干挂饰面石材及其金属挂件 第1部分:干挂饰面石材 JC830.1-2005 天然砂岩建筑板材 GB/T 23452-2009 天然石灰石建筑板材 GB/T 23453-2009 2 尺寸 3 角度 4 平面度 5 体积密度 天然饰面石材试验方法体积密度、真密度、真气孔率、吸水率试验方法 GB/T9966.3-2001 6 吸水率 5 天然饰面石材 7 压缩强度(干燥、水饱和、冻融循环) 0309 天然饰面石材试验方法干燥、水饱和、冻融循环后压缩强度试验方法 GB/T9966.1-2001 8 弯曲强度(干燥、水饱和) 天然饰面石材试验方法干燥、水饱和弯曲强度试验方法 GB/T9966.2-2001 9 镜面光泽度 建筑饰面材料镜向光泽度测定方法GB/T13891-2008 6 人工装饰石材 1 尺寸 0309 出口人造石检验方法 SN/T 0308-1993 2 密度 3 吸水率 4 抗折强度 5 抗压强度 7 混凝土瓦 1 尺寸 1003 混凝土瓦 JC/T 746-2007 2 外观 3 吸水率 4 承载力 5 不透水性(抗渗性能) 6 抗冻性 8 装饰板材 1 外观 0309 装饰石膏板 JC/T 799-2007 纸面石膏板 GB/T 9775-2008 矿物棉装饰吸声板 JC/T670-2005 建筑幕墙用铝塑复合板GB/T17748-2008 玻镁平板JC 688-2006 纤维水泥平板 第1部分:无石棉纤维水泥平板 JC/T 412.1-2006 纤维水泥平板 第2部分:温石棉纤维水泥平板JC/T 412.2-2006 纤维增强硅酸钙板 第1部分:无石棉硅酸钙板JC/T 564.1-2008 纤维增强硅酸钙板 第2部分:温石棉硅酸钙板 JC/T 564.2-2008 2 尺寸 3 断裂荷载/抗折强度 纸面石膏板GB /T 9775-2008 装饰石膏板 JC/T 799-2007 矿物棉装饰吸声板 JC/T670-2005 纤维水泥制品试验方法 GB/T 7019-1997 矿物棉装饰吸声板 GB/T25998-2010 4 对角线长度差 纸面石膏板GB /T 9775-2008 5 平面度偏差 装饰石膏板 JC/T 799-2007 8 装饰板材 6 涂层厚度 0309 非磁性金属基体上非导电覆盖层厚度测量 涡流方法 GB/T4957-2003 7 单位面积质量 装饰石膏板 JC/T 799-2007 装饰纸面石膏板 JC/T997-2006 8 装饰板材 8 含水率/含湿率 0309 装饰石膏板 JC/T 799-2007 矿物棉装饰吸声板 JC/T670-2005 纤维水泥制品试验方法 GB/T 7019-1997 矿物棉装饰吸声板 GB/T25998-2010 9 吸水率 纸面石膏板GB /T 9775-2008 装饰石膏板 JC/T 799-2007 纤维水泥制品试验方法 GB/T 7019-1997 10 不透水性 纤维水泥制品试验方法 GB/T 7019-1997 11 体积密度 12 湿胀率 13 干缩率 14 抗冻性 15 光泽度偏差 色漆和清漆 不含金属颜料的色漆漆膜的20°、60°和85°镜面光泽的测定 GB/T9754-2007 建筑饰面材料镜向光泽度测定方法GB/T13891-2008 8 装饰板材 16 弯曲强度 0309 纤维水泥制品试验方法 GB/T 7019-1997 人造板及饰面人造板理化性能试验方法GB/T17657-1999 建筑幕墙用铝塑复合板GB/T17748-2008 普通装饰用铝塑复合板GB/T22412-2008 17 弯曲弹性模量 建筑幕墙用铝塑复合板 GB/T17748-2008 18 面密度 纸面石膏板GB /T 9775-2008 19 剪切强度 铝塑复合板GB/T17748-2008 20 贯穿阻力 8 装饰板材 21 涂膜柔韧性 0309 建筑幕墙用铝塑复合板GB/T17748-2008 普通装饰用铝塑复合板GB/T22412-2008 22 耐热水性 23 耐碱性 建筑幕墙用铝塑复合板GB/T17748-2008 普通装饰用铝塑复合板GB/T22412-2008 金属及金属复合材料吊顶板 GB/T 23444-2009 金属及金属复合材料吊顶板 JC/T 1059-2007 24 耐油性 8 装饰板材 25 耐盐酸性 0309 建筑幕墙用铝塑复合板GB/T17748-2008 普通装饰用铝塑复合板GB/T22412-2008 建筑装饰用铝单板 GB/T23443-2009 金属及金属复合材料吊顶板GB/T23444-2009 金属及金属复合材料吊顶板JC/T1059-2007 26 受潮挠度 装饰石膏板 JC/T 799-2007 矿物棉装饰吸声板JC/T670-2005 27 铅笔硬度 色漆和清漆 铅笔法测定漆膜硬度 GB/T6739-2006 28 漆膜硬度 29 附着力 漆膜附着力测定法GB1720-1979 色漆和清漆 漆膜的划格试验 GB/T9286-1998 30 耐冲击性 漆膜耐冲击测定法 GB/T1732-1993 31 耐沾污性 建筑涂料涂层耐沾污性试验方法GB/T9780-2005 32 热变形温度 塑料 负荷变形温度的测定 第1部分:通用试验方法 GB/T1634.1-2004 8 装饰板材 33 剥离强度/剥离力 0309 胶粘剂180°剥离强度试验方法挠性材料对刚性材料GB/T2790-1995 铝塑复合板GB/T17748-2008 34 抗返卤性 玻镁平板JC 688-2006 35 耐溶剂性 建筑幕墙用铝塑复合板GB/T17748-2008 普通装饰用铝塑复合板GB/T22412-2008 建筑装饰用铝单板 GB/T23443-2009 36 护面纸与芯层粘结性 纸面石膏板GB/T 9775-2008 37 耐温差性 普通装饰用铝塑复合板 GB/T 22412-2008 建筑幕墙用铝塑复合板 GB/T 17748-2008 9 装饰用微晶玻璃 1 外观 0310 建筑装饰用微晶玻璃 JC/T 872-2000 2 尺寸 3 平面度偏差 4 角度公差 5 弯曲强度 6 耐酸性 7 耐碱性 8 耐急冷急热性 9 光泽度偏差 建筑饰面材料镜向光泽度测定方法GB/T13891-2008 10 漆1容器中状态 0215 富锌底漆HG/T 3668-2009 红丹醇酸防锈漆 HG/T3346-1999 钢结构桥梁漆HG/T 3656-1999 交联型氟树脂涂料 HG/T3792-2005 地坪涂料HG/T3829-2006 建筑用钢结构防腐涂料 JG/T224-2007 2 漆膜外观 富锌底漆HG/T 3668-2009 各色酚醛防锈漆 HG/T 3345-1999 红丹醇酸防锈漆 HG/T 3346-1999 钢结构桥梁漆 HG/T 3656-1999 交联型氟树脂涂料HG/T3792-2005 建筑用钢结构防腐涂料 JG/T224-2007 3 细度 4 耐弯曲性/柔韧性 漆膜柔韧性测定法 GB/T1731-1993 钢结构桥梁漆HG/T 3656-1999 红丹醇酸防锈漆 HG/T 3346-1999 建筑用钢结构防腐涂料 JG/T224-2007 10 漆5耐冲击性 0215 钢结构桥梁漆HG/T 3656-1999 富锌底漆HG/T 3668-2009 各色酚醛防锈漆 HG/T 3345-1999 交联型氟树脂涂料 HG/T3792-2005 地坪涂料 HG/T3829-2006 建筑用钢结构防腐涂料 JG/T224-2007 10 漆6干燥时间 0215 钢结构桥梁漆 HG/T 3656-1999 富锌底漆 HG/T 3668-2009 各色酚醛防锈漆 HG/T 3345-1999 红丹醇酸防锈漆 HG/T 3346-1999 交联型氟树脂涂料 HG/T3792-2005 地坪涂料 HG/T3829-2006 建筑用钢结构防腐涂料 JG/T224-2007 7 耐水性 钢结构桥梁漆 HG/T 3656-1999 交联型氟树脂涂料 HG/T3792-2005 地坪涂料 HG/T3829-2006 建筑用钢结构防腐涂料 JG/T224-2007 10 漆8附着力 0215 漆膜附着力测定法 GB/T1720-1979 钢结构桥梁漆 HG/T 3656-1999 交联型氟树脂涂料 HG/T3792-2005 地坪涂料 HG/T3829-2006 建筑用钢结构防腐涂料 JG/T224-2007 9 耐盐水性 钢结构桥梁漆 HG/T 3656-1999 各色酚醛防锈漆 HG/T 3345-1999 红丹醇酸防锈漆 HG/T 3346-1999 地坪涂料 HG/T3829-2006 建筑用钢结构防腐涂料 JG/T224-2007 10 施工性/刷涂性 钢结构桥梁漆 HG/T 3656-1999 富锌底漆HG/T 3668-2009 红丹醇酸防锈漆 HG/T 3346-1999 建筑用钢结构防腐涂料 JG/T224-2007 11 固体含量/不挥发物含量 红丹醇酸防锈漆 HG/T 3346-1999 交联型氟树脂涂料 HG/T3792-2005 地坪涂料 HG/T3829-2006 11 建筑材料有害物质 1 游离甲醛 0215 人造板及饰面人造板理化性能试验方法 GB/T17657-1999 室内装饰装修材料人造板及其制品中甲醛释放限量 GB 18580-2001 室内装饰装修材料内墙涂料中有害物质限量 GB18582-2008 室内装饰装修材料 胶粘剂中有害物质限量 GB18583-2008 室内装饰装修材料木家具中有害物质限量 GB18584-2001 室内装饰装修材料壁纸中有害物质限量 GB18585-2001 室内装饰装修材料地毯、地毯衬垫及地毯胶粘剂中有害物质释放限量GB18587-2001 民用建筑工程室内环境污染控制规范 GB50325-2010 水性涂料中甲醛含量的测定 乙酰丙酮分光光度法 GB/T 23993-2009 建筑防水涂料中有害物质限量 JC 1066-2008 建筑用外墙涂料中有害物质限量 GB 24408-2009 室内装饰装修材料 水性木器涂料中有害物质限量 GB 24410-2009 11 建筑材料有害物质 2 挥发性有机化合物 0215 室内装饰装修材料 溶剂型木器涂料中有害物质限量 GB18581-2009 室内装饰装修材料内墙涂料中有害物质限量 GB18582-2008 室内装饰装修材料聚氯乙烯卷材地板中有害物质限量 GB18586-2001 建筑用外墙涂料中有害物质限量 GB 24408-2009 室内装饰装修材料 水性木器涂料中有害物质限量 GB 24410-2009 民用建筑工程室内环境污染控制规范GB 50325-2010 建筑防水涂料中有害物质限量 JC 1066-2008 11 建筑材料有害物质 3 总挥发性有机化合物 0215 室内装饰装修材料 胶粘剂中有害物质限量 GB18583-2008 室内装饰装修材料地毯、地毯衬垫及地毯胶粘剂中有害物质释放限量 GB18587-2001 民用建筑工程室内环境污染控制规范 GB50325-2010 11 建筑材料有害物质 4 苯0215 室内装饰装修材料 溶剂型木器涂料中有害物质限量 GB18581-2009 室内装饰装修材料 胶粘剂中有害物质限量 GB18583-2008 建筑用外墙涂料中有害物质限量 GB 24408-2009 建筑防水涂料中有害物质限量 JC 1066-2008 民用建筑工程室内环境污染控制规范 GB 50325-2010 5 甲苯、乙苯和二甲苯总和 室内装饰装修材料 溶剂型木器涂料中有害物质限量 GB18581-2009 建筑防水涂料中有害物质限量 JC 1066-2008 建筑用外墙涂料中有害物质限量 GB 24408-2009 民用建筑工程室内环境污染控制规范 GB 50325-2010 11 建筑材料有害物质 6 苯、甲苯、乙苯、二甲苯总和 0215 室内装饰装修材料内墙涂料中有害物质限量GB18582-2008 室内装饰装修材料 水性木器涂料中有害物质限量 GB 24410-2009 建筑防水涂料中有害物质限量 JC 1066-2008 7 甲苯、二甲苯总和 室内装饰装修材料 胶粘剂中有害物质限量 GB18583-2008 民用建筑工程室内环境污染控制规范 GB 50325-2010 8 游离甲苯二异氰酸酯 色漆和清漆用漆基 异氰酸酯树脂中二异氰酸酯单体的测定 GB18446-2009 室内装饰装修材料 胶粘剂中有害物质限量 GB18583-2008 9 氯乙烯单体 室内装饰装修材料聚氯乙烯卷材地板中有害物质限量 GB18586-2001 10 苯乙烯 室内装饰装修材料地毯、地毯衬垫及地毯胶粘剂中有害物质释放限量 GB18587-2001 11 4-苯基环已烯 12 丁基羟基甲苯 11 建筑材料有害物质 13 2-乙基已醇 0215 室内装饰装修材料地毯、地毯衬垫及地毯胶粘剂中有害物质释放限量 GB18587-2001 11 建筑材料有害物质 14 内照射指数 0215 建筑材料放射性核素限量 GB6566-2010 15 外照射指数 16 氨 混凝土外加剂中释放氨的限量 GB18588-2001 17 可溶性铅 室内装饰装修材料 溶剂型木器涂料中有害物质限量 GB 18581-2009 室内装饰装修材料 内墙涂料中有害物质限量 GB 18582-2008 18 可溶性铬 19 可溶性镉 20 可溶性汞 12 土壤中有害物质 1 氡浓度 0238 民用建筑工程室内环境污染控制规范GB50325-2010 2 表面氡析出率 3 总铬 土壤环境监测技术规范 HJ/T 166-2004 4 铜5锌6镍12 土壤中有害物质 7 砷0238 土壤质量 总砷的测定 硼氢化钾-硝酸银分光光度法 GB/T 17135-1997 土壤环境监测技术规范 HJ/T 166-2004 13 防静电活动地板 1 尺寸 0309 防静电活动地板通用规范 SJ/T 10796-2001 2 外观 3 活动地板电性能 4 荷载性能 限集中荷载和极限集中荷载 5 耐冲击性能 6 可调支撑的允许使用荷载 七 防水材料 1 防水卷(片)材1拉伸强度/拉力 1007 建筑防水卷材试验方法 第8部分:沥青防水卷材 拉伸性能 GB/T328.8-2007 硫化橡胶或热塑性橡胶拉伸应力应变性能的测定 GB/T528-2009 弹性体改性沥青防水卷材 GB18242-2008 APP塑性体改性沥青防水卷材 GB 18243-2008 聚氯乙烯防水卷材 GB12952-2011 氯化聚乙烯防水卷材 GB 12953-2003 建筑防水卷材试验方法 第9部分:高分子防水卷材 拉伸性能 GB/T328.9-2007 2 延伸率/断裂伸长率 1 防水卷(片)材3柔度/低温弯折性 1007 建筑防水卷材试验方法 第14部分:沥青防水卷材 低温柔性 GB/T328.14-2007 聚氯乙烯防水卷材 GB12952-2011 氯化聚乙烯防水卷材 GB 12953-2003 自粘聚合物改性沥青防水卷材 GB 23441-2009 弹性体改性沥青防水卷材 GB18242-2008 4 不透水性 建筑防水卷材试验方法 第10部分:沥青和高分子防水卷材 不透水性 GB/T328.10-2007 高分子防水材料 第一部分片材 GB 18173.1-2012 5 耐热度/耐热性 建筑防水卷材试验方法 第11部分:沥青防水卷材 耐热性 GB/T328.11-2007 6 撕裂强度 建筑防水卷材试验方法 第18部分:沥青防水卷材 撕裂性能(钉杆法) GB/T328.18-2007 硫化橡胶或热塑性橡胶拉伸应力应变性能的测定 GB/T528-2009 硫化橡胶或热塑性橡胶撕裂强度的测定(裤形、直角形和新月形试样) GB/T529-2008 1 防水卷(片)材7尺寸稳定性/热处理尺寸变化率 1007 建筑防水卷材试验方法 第12部分:沥青防水卷材 尺寸稳定性 GB/T328.12-2007 聚氯乙烯防水卷材 GB12952-2011 氯化聚乙烯防水卷材 GB 12953-2003 高分子防水材料 第一部分片材 GB 18173.1-2012 8 人工气候加速老化 建筑防水材料老化试验方法GB/T18244-2000 9 剥离强度 建筑防水卷材试验方法 第20部分:沥青防水卷材 接缝剥离性能 GB/T328.20-2007 自粘聚合物改性沥青防水卷材 GB 23441-2009 硫化橡胶或热塑性橡胶与织物粘合强度的测定 GB/T532-2008 高分子防水材料 第一部分片材 GB 18173.1-2012 10 抗冲击性能 聚氯乙烯防水卷材 GB12952-2011 氯化聚乙烯防水卷材 GB 12953-2003 1 防水卷(片)材11 剪切性能 1007 建筑防水卷材试验方法 第22部分:沥青防水卷材 接缝剪切性能 GB/T328.22-2007 12 剪切状态下的粘合性 高分子防水材料 第一部分片材 GB 18173.1-2012 13 卷材下面沥青涂盖层厚度 道桥用改性沥青防水卷材 JC/T974-2005 弹性体改性沥青防水卷材 GB18242-2008 APP塑性体改性沥青防水卷材 GB 18243-2008 14 可溶物含量 建筑防水卷材试验方法 第26部分:沥青防水卷材 可溶物含量(浸涂材料含量) GB/T328.26-2007 道桥用改性沥青防水卷材 JC/T974-2005 15 耐碱性/盐处理 道桥用改性沥青防水卷材 JC/T974-2005 16 热老化处理 道桥用改性沥青防水卷材 JC/T974-2005 弹性体改性沥青防水卷材 GB18242-2008 APP塑性体改性沥青防水卷材 GB 18243-2008 1 防水卷(片)材17 钉杆水密性 1007 自粘聚合物改性沥青防水卷材 GB 23441-2009 18 渗油性 自粘聚合物改性沥青防水卷材 GB 23441-2009 预铺/湿铺防水卷材 GB/T 23457-2009 19 持粘性 20 热老化 21 热稳定性 22 撕裂强度 预铺/湿铺防水卷材 GB/T 23457-2009 23 吸水率 聚氯乙烯防水卷材 GB12952-2011 24 耐化学性 2 防水涂料 1 拉伸强度 1007 建筑防水涂料试验方法 GB/T16777-2008 聚合物乳液建筑防水涂料 JC/T864-2008 聚氨酯防水涂料GB/T19250-2003 道桥用防水涂料JC/T975-2005 聚合物水泥防水涂料 GB/T 23445-2009 2 断裂伸长率 3 柔度/低温弯折性 2 防水涂料 4 不透水性 1007 建筑防水涂料试验方法 GB/T16777-2008 聚合物乳液建筑防水涂料 JC/T864-2008 聚氨酯防水涂料 GB/T19250-2003 道桥用防水涂料JC/T975-2005 聚合物水泥防水涂料 GB/T 23445-2009 聚合物水泥防水浆料 JC/T 2090-2011 5 固体含量 建筑防水涂料试验方法 GB/T16777-2008 聚氨酯防水涂料 GB/T19250-2003 道桥用防水涂料JC/T975-2005 聚合物水泥防水涂料 GB/T 23445-2009 6 干燥时间(表干时间、实干时间) 建筑防水涂料试验方法 GB/T16777-2008 聚氨酯防水涂料 GB/T19250-2003 道桥用防水涂料JC/T975-2005 聚合物水泥防水浆料 JC/T 2090-2011 2 防水涂料 7 加热伸缩率 1007 建筑防水涂料试验方法 GB/T16777-2008 聚氨酯防水涂料 GB/T19250-2003 8 定伸时的老化 聚氨酯防水涂料 GB/T19250-2003 2 防水涂料 9 粘结强度 1007 建筑防水涂料试验方法 GB/T16777-2008 聚氨酯防水涂料 GB/T19250-2003 道桥用防水涂料JC/T975-2005 聚合物水泥防水涂料 GB/T 23445-2009 聚合物水泥防水浆料 JC/T 2090-2011 10 抗渗性 聚合物水泥防水涂料 GB/T 23445-2009 无机防水堵漏材料 GB 23440-2009 聚合物水泥防水浆料 JC/T 2090-2011 11 耐热度/耐热性 道桥用防水涂料JC/T975-2005 水乳型沥青防水涂料 JC/T408-2005 12 抗裂性 溶剂型橡胶沥青防水涂料 JC/T 852-1999 13 盐处理 道桥用防水涂料JC/T975-2005 2 防水涂料 14 酸处理、碱处理 1007 建筑防水涂料试验方法 GB/T16777-2008 聚合物乳液建筑防水涂料 JC/T864-2008 聚氨酯防水涂料GB/T19250-2003 水乳型沥青防水涂料 JC/T408-2005 15 紫外线处理 建筑防水涂料试验方法 GB/T16777-2008 水乳型沥青防水涂料 JC/T408-2005 16 热老化处理 建筑防水涂料试验方法 GB/T16777-2008 道桥用防水涂料JC/T975-2005 水乳型沥青防水涂料 JC/T408-2005 17 柔韧性 聚合物水泥防水浆料 JC/T 2090-2011 18 抗压强度 19 抗折强度 20 耐碱性 21 抗冻性 22 收缩率 23 耐热性 3 刚性防水材料 1 凝结时间 1001 水泥标准稠度用水量、凝结时间、安定性检验方法 GB/T1346-2011 2 安定性 3 刚性防水材料 3 抗压强度 1001 水泥胶砂强度检验方法(IS0法) GB/T17671-1999 4 抗折强度 3 刚性防水材料 5 粘结强度 1001 无机防水堵漏材料 GB 23440-2009 6 抗渗压力(28d、56d) 砂浆、混凝土防水剂 JC 474-2008 水泥基渗透结晶型防水材料 GB 18445-2012 7 耐热性 无机防水堵漏材料 GB 23440-2009 8 冻融循环 普通砼长期性能和耐久性能试验方法标准 GB/T 50082-2009 9 含水量 混凝土外加剂匀质性试验方法GB/T8077-2012 10 氯离子含量 11 细度 12 总碱量 混凝土外加剂GB8076-2008 13 减水率 14 泌水率 15 含气量 16 收缩率 混凝土外加剂GB8076-2008 聚合物水泥防水砂浆 JC/ T984-2011 17 钢筋锈蚀 混凝土外加剂GB8076-2008 18 湿基面粘结强度 水泥基渗透结晶型防水材料 GB 18445-2012 3 刚性防水材料 19 涂层抗渗压力 1001 无机防水堵漏材料 GB23440-2009 20 试件抗渗压力 21 抗冻性 聚合物水泥防水砂浆 JC/ T984-2011 4 防水剂 1 外观 0318 水性渗透型无机防水剂 JC/T 1018-2006 建筑表面用有机硅防水剂 JC/T902-2002 2 PH值 混凝土外加剂匀质性试验方法GB/T8077-2012 3 吸水率比 建筑表面用有机硅防水剂 JC/T902-2002 4 渗透性(标准状态、热处理、低温处理、紫外线处理、酸处理、碱处理) 5 粘度 涂料粘度测定法GB1723-1993 6 凝胶化时间 水性渗透型无机防水剂 JC/T 1018-2006 7 抗渗性/渗入高度 8 稳定性 5 防护剂 1 防水性 0318 建筑装饰用天然石材保护剂 JC/T973-2005 2 耐污性 5 防护剂 3 耐酸性 0318 建筑装饰用天然石材保护剂 JC/T973-2005 4 耐碱性 5 耐紫外线老化 八 密封材料 1 嵌缝密封材料 1 外观 0223 混凝土建筑接缝用密封胶 JC/T 881-2001 幕墙玻璃接缝用密封胶 JC/T 882-2001 石材用建筑密封胶 GB/T 23261-2009 建筑用硅酮结构密封胶 GB 16776-2005 硅酮建筑密封胶 GB/T 14683-2003 2 密度 建筑密封材料试验方法 第2部分:密度的测定 GB/T13477.2-2002 3 表干时间 建筑密封材料试验方法 第5部分:表干时间的测定 GB/T13477.5-2002 4 流动性/下垂度 建筑密封材料试验方法 第6部分:流动性的测定 GB/T 13477.6-2002 5 拉伸粘结性/拉抻粘结强度/拉伸模量 建筑密封材料试验方法 第8部分:拉伸粘结性的测定 GB/T13477.8-2002 6 断裂伸长率 1 嵌缝密封材料 7 浸水后拉伸粘结性/拉抻粘结强度/拉伸模量 0223 建筑密封材料试验方法 第9部分:浸水后拉伸粘结性的测定 GB/T13477.9-2002 8 浸水后断裂伸长率 9 定伸粘结性 建筑密封材料试验方法 第10部分:定伸粘结性的测定 GB/T13477.10-2002 10 浸水后定伸粘结性 建筑密封材料试验方法 第11部分:浸水后定伸粘结性的测定 GB/T 13477.11-2002 11 拉伸-压缩循环后粘结性 建筑密封材料试验方法 第12部分:同一温度下拉伸-压缩循环后粘结性的测定 GB/T 13477.12-2002 12 冷拉-热压后粘结性 建筑密封材料试验方法 第13部分:冷拉-热压后粘结性的测定GB/T13477.13-2002 13 浸水及拉伸-压缩循环后粘结性的测定 建筑密封材料试验方法 第14部分:浸水及拉伸-压缩循环后粘结性的测定 GB/T 13477.14-2002 1 嵌缝密封材料 14 弹性恢复率 0223 建筑密封材料试验方法 第17部分:弹性恢复率的测定GB/T13477.17-2002 15 剥离粘结性 建筑密封材料试验方法 第18部分:剥离粘结性的测定 GB/T 13477.18-2002 1 嵌缝密封材料 16 质量与体积变化 0223 建筑密封材料试验方法 第19部分:质量与体积变化的测定 GB/T 13477.19-2002 17 污染性 建筑密封材料试验方法 第20部分:污染性的测定 GB/T 13477.20-2002 18 紫外线处理 石材用建筑密封胶 GB/T 23261-2009 彩色涂层钢板用建筑密封胶 JC/T 884-2001 19 邵氏硬度 硫化橡胶或热塑性橡胶 压入硬度试验方法 第1部分:邵氏硬度计法(邵尔硬度) GB/T 531.1-2008 2 止水带/止水条 1 邵氏硬度 0223 硫化橡胶或热塑性橡胶 压入硬度试验方法 第1部分:邵氏硬度计法(邵尔硬度) GB/T 531.1-2008 2 拉伸强度 硫化橡胶或热塑性橡胶拉伸应力应变性能的测定 GB/T528-2009 3 扯断伸长率 4 撕裂强度 硫化橡胶或热塑性橡胶撕裂强度的测定(裤形、直角形和新月形试样 GB/T529-2008 5 压缩永久变形 硫化橡胶、热塑性橡胶 常温、高温和低温下压缩永久变形测定 GB/T7759-1996 2 止水带/止水条 6 热空气老化 0223 硫化橡胶或热塑性橡胶 热空气加速老化和耐热试验 GB/T3512-2001 7 橡胶与金属粘接 高分子防水材料 第二部分 止水带 GB 18173.2-2000 8 密度 硫化橡胶或热塑性橡胶 密度的测定 GB/T 533-2008 9 外观 膨润土橡胶遇水膨胀止水条 JG/T141-2001 10 尺寸 11 抗水压力 12 膨胀倍率 13 耐热性 14 低温试验 15 耐水性 九 胶粘剂 1 胶粘剂 1 晾置时间 0318 陶瓷墙地砖胶粘剂 JC/T547-2005 2 耐水粘结性 3 耐温粘结性 4 冻融性 5 拉伸强度(标准条件、浸水、热老化、冻融循环) 6 固体含量/不挥发物含量 胶粘剂不挥发物含量的测定 GB/T2793-1995 建筑胶粘剂试验方法 第1部分: 陶瓷砖胶粘剂试验方法 GB/T 12954.1-2008 1 胶粘剂 7 拉伸强度 0318 树脂浇铸体性能试验方法 GB/T 2567-2008 8 弹性模量(弯曲、拉伸) 9 伸长率 10 适用期 建筑胶粘剂试验方法 第1部分: 陶瓷砖胶粘剂试验方法 GB/T 12954.1-2008 11 拉伸剪切强度 胶粘剂 拉伸剪切强度的测定(刚性材料对刚性材料) GB/T 7124-2008 碳纤维片材加固混凝土结构技术规程 CECS 146:2003(2007) 混凝土结构加固设计规范GB50367-2006 12 正拉粘结强度 胶粘剂对接接头拉伸强度的测定 GB/T 6329-1996 建筑工程饰面砖粘结强度检验标准JGJ110-2008 碳纤维片材加固混凝土结构技术规程 CECS 146:2003(2007) 混凝土结构加固设计规范GB50367-2006 1 胶粘剂 13 压缩强度 0318 碳纤维片材加固混凝土结构技术规程 CECS 146:2003(2007) 纤维片材加固修复结构用粘结树脂JG/T166-2004 树脂浇铸体性能试验方法 GB/T 2567-2008 1 胶粘剂 14 弯曲强度 0318 碳纤维片材加固混凝土结构技术规程 CECS 146:2003(2007) 纤维片材加固修复结构用粘结树脂JG/T166-2004 树脂浇铸体性能试验方法 GB/T 2567-2008 混凝土结构加固设计规范 GB50367-2006 15 凝胶时间 纤维片材加固修复结构用粘结树脂JG/T166-2004 环氧树脂凝胶时间测定方法 GB/T12007.7-1989 16 热变形温度 塑料负荷变形温度的测定 通用试验方法 GB/T 1634.1-2004 17 对接接头拉伸强度 胶粘剂对接接头拉伸强度的测定 GB/T 6329-1996 18 劈裂抗拉强度 混凝土结构加固设计规范 GB50367-2006 19 粘度 胶粘剂粘度的测定 单圆筒旋转粘度计法 GB/T 2794-2013 仅用旋转粘度计法 1 胶粘剂 20 密度 0318 液态胶粘剂密度测定方法 重量杯法 GB/T 13354-1992 21 滑移 陶瓷墙地砖胶粘剂 JC/T547-2005 十 管网材料 1 给、排水管材 1 外观 0315 建筑排水用硬聚氯乙烯(PVC-U)管材GB/T5836.1-2006 给水用硬聚氯乙烯(PVC-U)管材GB/T10002.1-2006 给水用聚乙烯(PE)管材 GB/T13663-2000 排水用芯层发泡硬聚氯乙烯(PVC-U)管材GB/T 16800-2008 埋地排水用硬聚氯乙烯(PVC-U)结构壁管道系统 第1部分:双壁波纹管材 GB/T 18477.1-2007 冷热水用聚丙烯管道系统第2部分:管材 GB/T 18742.2-2002 埋地用聚乙烯(PE)结构壁管道系统 第2部分:聚乙烯缠绕结构壁管材 GB/T 19472.2-2004 无压埋地排污、排水用硬聚氯乙烯(PVC-U)管材 GB/T20221-2006 玻璃纤维增塑料夹砂管 GB/T 21238-2007 给水用孔网钢带聚乙烯复合管 CJ/T181-2003 钢丝网骨架塑料(聚乙烯)复合管材及管件 CJ/T 189-2007 1 给、排水管材 2 尺寸 0315 塑料管道系统 塑料部件尺寸的测定GB/T 8806-2008 玻璃纤维增塑料夹砂管 GB/T 21238-2007 3 拉伸强度 热塑性塑料管材 拉伸性能测定 第2部分:硬聚氯乙烯(PVC-U)、氯化聚氯乙烯(PVC-C)和高抗冲 聚氯乙烯(PVC-HI)管材 GB/T8804.2-2003 4 断裂伸长率 热塑性塑料管材 拉伸性能测定第3部分:聚烯烃管材 GB/T 8804.3-2003 5 纵向回缩率 热塑性塑料管材纵向回缩率的测定GB/T6671-2001 1 给、排水管材 6 落锤冲击试验/冲击强度 0315 热塑性塑料管材耐外冲击性能试验方法 时针旋转法 GB/T14152-2001 PE结构壁管材和PE双壁波纹管材不测公称直径DN500的管材,其他管材只测外径≤400mm的管材 1 给、排水管材 7 维卡软化温度 0315 热塑性塑料管材、管件 维卡软化温度的测定 GB/T8802-2001 8 不透光性 给水用硬聚氯乙烯(PVC-U)管材GB/T10002.1-2006冷热水用聚丙烯管道系统第2部分:管材 GB/T 18742.2-2002 9 密度 塑料 非泡沫塑料密度的测定 第1部分:浸渍法、液体比重瓶法和滴定法 GB/T 1033.1-2008 10 液压试验 流体输送用热塑性塑料管材耐内压试验方法 GB/T6111-2003 11 弯曲度 硬质塑料管材弯曲度测量方法QB/T 2803-2006 12 环刚度 热塑性塑料管材环刚度的测定GB/T 9647-2003 排水用芯层发泡硬聚氯乙烯(PVC-U)管材GB/T 16800-2008 埋地用聚乙烯(PE)结构壁管道系统 第2部分:聚乙烯缠绕结构壁管材GB/T 19472.2-2004 玻璃纤维增塑料夹砂管 GB/T 21238-2007 只测外径≤1000mm的管材 1 给、排水管材 13 环柔度/环柔性 0315 热塑性塑料管材环刚度的测定GB/T 9647-2003 埋地排水用硬聚氯乙烯结构壁管道系统 第1部分:双壁波纹管材GB/T 18477.1-2007 埋地用聚乙烯(PE)结构壁管道系统第1部分:聚乙烯双壁波纹管材GB/T19472.1-2004 埋地用聚乙烯(PE)结构壁管道系统 第2部分:聚乙烯缠绕结构壁管材GB/T 19472.2-2004 只测外径≤1000mm的管材 14 爆破试验/爆破强度试验 流体输送塑料管材液压瞬时爆破和耐压试验方法 GB/T 15560-1995 15 受压开裂稳定性 钢丝网骨架塑料(聚乙烯)复合管材及管件 CJ/T 189-2007 1 给、排水管材 16 烘箱试验 0315 埋地排水用硬聚氯乙烯结构壁管道系统 第1部分:双壁波纹管材GB/T19472.1-2004 埋地用聚乙烯(PE)结构壁管道系统第1部分:聚乙烯双壁波纹管材GB/T 19472.2-2004 构壁管道系统 第1部分:双壁波纹管材GB/T 18477.1-2007 1 给、排水管材 17 扁平试验/压扁性能 0315 排水用芯层发泡硬聚氯乙烯(PVC-U)管材GB/T 16800-2008 给水用孔网钢带聚乙烯复合管理 CJ/T181-2003 给水涂塑复合钢管 CJ/T 120-2008 给水衬塑复合钢管 CJ/T136-2007 18 简支梁冲击试验 流体输送用热塑性塑料管材简支梁冲击试验方法 GB/T18743-2002 19 附着力试验 给水涂塑复合钢管 CJ/T 120-2008 20 结合强度试验 给水衬塑复合钢管 CJ/T136-2007 2 给、排水管件 1 外观 0315 建筑排水用硬聚氯乙烯(PVC-U)管件 GB/T 5836.2-2006 给水用硬聚氯乙烯管件GB/T10002.2-2003 冷热水用聚丙烯管道系统 第3部分:管件GB/T18742.3-2002 2 尺寸 3 维卡软化温度 硬聚氯乙烯管材及管件维卡软化温度测定方法 GB/T8802-2001 2 给、排水管件 4 烘箱试验 0315 注射成型硬质聚氯乙烯(PVC-U)、氯化聚氯乙烯(PVC-C)、丙烯腈-丁二烯-苯乙烯三元共聚物(ABS)和丙烯腈-苯乙烯-丙烯酸盐三元共聚物(ASA)管件 热烘箱试验方法GB/T8803-2001 5 坠落试验 硬聚氯乙烯(PVC-U)管件坠落试验方法GB/T8801-2007 6 密度 塑料 非泡沫塑料密度的测定 第1部分:浸渍法、液体比重瓶法和滴定法 GB/T 1033.1-2008 7 液压试验 给水用硬聚氯乙烯管件GB/T10002.2-2003 冷热水用聚丙烯管道系统 第3部分:管件GB/T18742.3-2002 8 不透光性 冷热水用聚丙烯管道系统 第3部分:管件 GB/T18742.3-2002 3 住宅厨房、卫生间排气道 1 外观 0315 住宅厨房、卫生间排气道 JG/T 194-2006 2 尺寸 3 承载力试验 4 抗柔性冲击 4 玻璃纤维增强水泥通风管道 1 外观 0315 玻璃纤维增强水泥排气管道 JC/T 854-2008 玻璃纤维增强水泥(GRC)装饰制品 JC/T 940-2004 玻镁风管 JC/T 646-2006 2 尺寸 3 密度 玻璃纤维增强水泥排气管道 JC/T 854-2008 玻璃纤维增强水泥 (GRC)装饰制品 JC/T 940-2004 玻镁风管 JC/T 646-2006 玻璃纤维增强水泥性能试验方法GB/T 15231-2008 4 吸水性 玻璃纤维增强水泥排气管道 JC/T 854-2008 玻镁风管 JC/T 646-2006 玻璃纤维增强水泥性能试验方法GB/T 15231-2008 5 冲击性能 6 承载力试验 玻璃纤维增强水泥排气管道 JC/T 854-2008 7 抗弯强度 玻镁风管 JC/T 646-2006 玻璃纤维增强水泥性能试验方法GB/T 15231-2008 8 抗拉强度 玻璃纤维增强水泥性能试验方法GB/T 15231-2008 4 玻璃纤维增强水泥通风管道 9 抗压强度 0315 玻璃纤维增强水泥性能试验方法GB/T 15231-2008 10 软化系数 玻镁风管 JC/T 646-2006 11 抗冻性能 玻璃纤维增强水泥(GRC)装饰制品 JC/T 940-2004 玻镁风管 JC/T 646-2006 玻璃纤维增强水泥性能试验方法GB/T 15231-2008 5 低压流体输送用镀锌焊接钢管 1 拉伸强度 0339 金属材料 拉伸试验 第1部分:室温试验方法 GB/T228.1-2010 2 压扁试验 金属管 压扁试验方法 GB/T246-2007 3 弯曲试验 金属管 弯曲试验方法 GB/T244-2008 4 镀锌层重量 低压流体输送用镀锌焊接钢管 GB/T3091-2008 5 镀锌层均匀性 6 黑管壁厚 7 尺寸 6 普通碳素钢电线套管 1 弯曲 0339 金属管 弯曲试验方法 GB/T244-2008 2 锌层均匀性 碳素结构钢电线套管 YB/T 5305-2008 3 锌层质量 4 尺寸 电气安装用导管 特殊要求—金属导管 GB/T 14823.1-1993 6 普通碳素钢电线套管 5 抗压 0339 电气安装用导管 特殊要求—金属导管 GB/T 14823.1-1993 7 建筑用绝缘电工套管 1 外观 0315 建筑用绝缘电工套管 JG 3050-1998 2 尺寸 3 抗压性能 4 冲击性能 5 弯曲性能 6 弯扁性 7 跌落性能 8 耐热性能 9 自熄时间 10 氧指数 11 电气性能 8 穿线管材 1 外观 0315 埋地通讯用多孔一体塑料管材 第一部分PVC-U多孔一体管材 QB/T 2667.1-2004 埋地式高压电力电缆用氯化聚氯乙烯(PVC-C)套管 QB/T 2479-2005 地下通信管道用塑料管 第1部分:总则 YD/T 841.1-2008 电力电缆用导管技术条件 第1部分:总则 DL/T 802.1-2007 2 尺寸 3 弯曲度 硬质塑料管材弯曲度测量方法QB/T 2803-2006 8 穿线管材 4 拉伸强度 0315 热塑性塑料管材 拉伸性能测定 第2部分:硬聚氯乙烯(PVC-U)、氯化聚氯乙烯(PVC-C)和高抗冲 聚氯乙烯(PVC-HI)管材 GB/T8804.2-2003 塑性塑料管材 拉伸性能测定第3部分:聚烯烃管材 GB/T 8804.3-2003 玻璃纤维增强塑料拉伸性能试验方法 GB/T 1447-2005 5 断裂伸长率 热塑性塑料管材 拉伸性能测定第3部分:聚烯烃管材 GB/T 8804.3-2003 6 纵向回缩率 热塑性塑料管材纵向回缩率的测定GB/T6671-2001 7 维卡软化温度 硬聚氯乙烯管材及管件维卡软化温度测定方法 GB/T8802-2001 8 穿线管材 8 落锤冲击试验 0315 埋地通讯用多孔一体塑料管材 第一部分PVC-U多孔一体管材 QB/T 2667.1-2004 地下通信管道用塑料管 第2部分:实壁管YD/T 841.2-2008 地下通信管道用塑料管 第3部分:双壁波纹管 YD/T 841.3-2008 地下通信管道用塑料管 第5部分:梅花管YD/T 841.5-2008 埋地式高压电力电缆用氯化聚氯乙烯(PVC-C)套管 QB/T 2479-2005 9 耐外负荷性 埋地通讯用多孔一体塑料管材 第一部分PVC-U多孔一体管材 QB/T 2667.1-2004 10 环段热压缩力 埋地式高压电力电缆用氯化聚氯乙烯(PVC-C)套管 QB/T 2479-2005 11 弯曲强度 玻璃纤维增强塑料弯曲性能试验方法 GB/T 1449-2005 12 管刚度/环刚度 电力电缆用导管技术条件 第2部分:玻璃纤维增强塑料电缆导管DL/T 802.2-2007 地下通信管道用塑料管 第1部分:总则 YD/T 841.1-2008 8 穿线管材 13 负荷变形温度 0315 塑料负荷变形温度的测定 塑料、硬橡胶和长纤维增强复合材料GB/T 1634.2-2004 14 扁平试验 地下通信管道用塑料管 第1部分:总则YD/T 841.1-2008 15 坠落试验 地下通信管道用塑料管 第1部分:总则YD/T 841.1-2008 9 金属管材 1 液压试验 0315 金属管 液压试验方法 GB/T 241-2007 10 建筑装饰用不锈钢焊接管材 1 拉伸 0301 建筑装饰用不锈钢焊接管材 JG/T 3030-1995 2 压扁 3 冷弯 4 壁厚 11 钢管 1 屈服强度 0301 金属材料 拉伸试验 第1部分:室温试验方法 GB/T228.1-2010 2 抗拉强度 3 弯曲试验 金属管弯曲试验方法 GB/T244-2008 4 压扁试验 金属管压扁试验方法 GB/T246-2007 12 井盖 1 外观 0301 钢纤维混凝土检查井盖 JC889-2001 铸铁检查井盖CJ/T3012-1993 玻璃纤维增强塑料复合检查井盖JC/T1009-2006 检查井盖 GB/T 23858-2009 12 井盖 2 几何尺寸及允许偏差 0301 钢纤维混凝土检查井盖 JC889-2001 铸铁检查井盖CJ/T3012-1993 玻璃纤维增强塑料复合检查井盖JC/T1009-2006 检查井盖 GB/T 23858-2009 3 承载能力 十一 保温材料 1 建筑保温砂浆及保温系统 1 外观 1016 建筑保温砂浆GB/T 20473-2006 2 干密度 建筑保温砂浆GB/T 20473-2006 胶粉聚苯颗粒外墙外保温系统材料 JG/T 158-2013 3 放射性 建筑材料放射性核素限量 GB6566-2010 4 抗压强度 无机硬质绝热制品试验方法 GB/T 5486-2008 胶粉聚苯颗粒外墙外保温系统材料 JG/T 158-2013 5 抗冻性能 建筑保温砂浆 GB/T 20473-2006 6 软化系数 建筑保温砂浆 GB/T 20473-2006 胶粉聚苯颗粒外墙外保温系统材料 JG/T 158-2013 1 建筑保温砂浆及保温系统 7 导热系数 1016 绝热材料稳态热阻及有关特性的测定 防护热板法 GB/T 10294-2008 绝热材料稳态热阻及有关特性的测定 热流计法 GB/T 10295-2008 建筑保温砂浆 GB/T 20473-2006 8 线(性)收缩率 建筑砂浆基本性能试验方法标准JGJ/T 70-2009 胶粉聚苯颗粒外墙外保温系统材料 JG/T 158-2013 9 压剪粘接强度 胶粉聚苯颗粒外墙外保温系统材料 JG/T 158-2013 10 耐水压剪粘结强度 11 耐冻融压剪粘结强度 12 耐温压剪粘结强度 13 可使用(操作)时间 胶粉聚苯颗粒外墙外保温系统材料 JG/T 158-2013 膨胀聚苯板薄抹灰外墙外保温系统JG149-2003 14 拉伸粘结强度 15 浸水后拉伸粘结强度 1 建筑保温砂浆及保温系统 16 压折比 1016 水泥胶砂强度检验方法(IS0法)GB/T17671-1999 胶粉聚苯颗粒外墙外保温系统材料 JG/T 158-2013 17 断裂伸长率 建筑防水涂料试验方法GB/T16777-2008 胶粉聚苯颗粒外墙外保温系统材料 JG/T 158-2013 18 不挥发物含量 胶粉聚苯颗粒外墙外保温系统材料 JG/T 158-2013 19 贮存稳定性 20 容器中状态 21 施工性 22 干燥时间 23 打磨性 24 耐水性 25 耐碱性 26 柔韧性 27 低温贮存稳定性 28 透水性 2 保温板材 1 尺寸稳定性/尺寸变化率 1016 硬质泡沫塑料尺寸稳定性试验方法GB/T8811-2008 泡沫塑料和橡胶 线性尺寸测定GB/T6342-1996 柔性泡沫橡塑绝热制品 GB/T 17794-2008 绝热用模塑聚苯乙烯泡沫塑料GB/T 10801.1-2002 绝热用挤塑聚苯乙烯泡沫塑料GB/T 10801.2-2002(XPS) 喷涂硬聚氨酯泡沫塑料 GB/T 20219-2006 膨胀聚苯板薄抹灰外墙外保温系统JG149-2003 2 外观 柔性泡沫橡塑绝热制品 GB/T 17794-2008 绝热用模塑聚苯乙烯泡沫塑料GB/T 10801.1-2002 绝热用挤塑聚苯乙烯泡沫塑料GB/T 10801.2-2002(XPS) 3 密度 泡沫塑料及橡胶 表观密度的测定GB/T6343-2009 柔性泡沫橡塑绝热制品 GB/T 17794-2008 绝热用模塑聚苯乙烯泡沫塑料GB/T 10801.1-2002 膨胀聚苯板薄抹灰外墙外保温系统JG149-2003 2 保温板材 4 吸水率 1016 硬质泡沫塑料吸水率的测定GB/T8810-2005 绝热用模塑聚苯乙烯泡沫塑料GB/T 10801.1-2002 绝热用挤塑聚苯乙烯泡沫塑料GB/T 10801.2-2002(XPS) 喷涂聚氨酯硬泡体保温材料JC/T998-2006 5 真空吸水率 柔性泡沫橡塑绝热制品 GB/T 17794-2008 6 氧指数 塑料 用氧指数法测定燃烧行为 第2部分:室温试验 GB/T 2406.2-2009 绝热用模塑聚苯乙烯泡沫塑料GB/T 10801.1-2002 喷涂聚氨酯硬泡体保温材料JC/T998-2006 7 燃烧分级(B2级) 建筑材料可燃性试验方法 GB 8626-2007 建筑材料及制品燃烧性能分级GB8624-2012 绝热用模塑聚苯乙烯泡沫塑料GB/T 10801.1-2002 绝热用挤塑聚苯乙烯泡沫塑料GB/T 10801.2-2002(XPS) 2 保温板材 8 导热系数 1016 绝热材料稳态热阻及有关特性的测定 防护热板法 GB/T 10294-2008 绝热材料稳态热阻及有关特性的测定 热流计法 GB/T 10295-2008 塑料导热系数试验方法 护热平板法 GB/T 3399-1982 绝热用模塑聚苯乙烯泡沫塑料GB/T 10801.1-2002 绝热用挤塑聚苯乙烯泡沫塑料GB/T 10801.2-2002(XPS) 喷涂聚氨酯硬泡体保温材料JC/T998-2006 喷涂硬聚氨酯泡沫塑料 GB/T 20219-2006 膨胀聚苯板薄抹灰外墙外保温系统JG149-2003 2 保温板材 9 抗压强度/压缩强度 1016 硬质泡沫塑料压缩强度试验方法GB/T 8813-2008 绝热用模塑聚苯乙烯泡沫塑料GB/T 10801.1-2002 绝热用挤塑聚苯乙烯泡沫塑料GB/T 10801.2-2002(XPS) 喷涂硬聚氨酯泡沫塑料 GB/T 20219-2006 10 抗渗性 喷涂聚氨酯硬泡体保温材料JC/T998-2006 2 保温板材 11 垂直于板面方向的抗拉强度 1016 膨胀聚苯板薄抹灰外墙外保温系统JG149-2003 3 无机硬质绝热制品 1 尺寸 1006 无机硬质绝热制品试验方法 GB/T 5486-2008 2 外观 3 抗压强度 4 抗折强度 5 含水率 6 密度/体积密度 无机硬质绝热制品试验方法 GB/T 5486-2008 泡沫玻璃绝热制品 JC/T 647-2005 7 导热系数 绝热材料稳态热阻及有关特性的测定 防护热板法 GB/T 10294-2008 绝热材料稳态热阻及有关特性的测定 热流计法 GB/T 10295-2008 8 吸水率 泡沫玻璃绝热制品 JC/T 647-2005 无机硬质绝热制品试验方法 GB/T 5486-2008 4 矿物棉/玻璃棉 1 压缩强度 1006 矿物棉制品压缩性能试验方法GB/T 13480-1992 建筑用岩棉、矿渣棉绝热制品GB/T 19686-2005 2 吸水率 矿物棉及其制品试验方法 GB/T 5480-2008 3 表观密度/密度 4 矿物棉/玻璃棉 4 导热系数/热阻 1006 绝热材料稳态热阻及有关特性的测定 防护热板法 GB/T 10294-2008 绝热材料稳态热阻及有关特性的测定 热流计法 GB/T 10295-2008 5 垂直于板面方向的抗拉强度 建筑外墙外保温用岩棉制品 GB/T 25975-2010 6 质量吸湿率 矿物棉及其制品试验方法 GB/T 5480-2008 5 玻璃纤维网格布 1 单位面积质量 1006 增强制品试验方法 第3部分: 单位面积质量的测定 GB/T 9914.3-2001 2 断裂强力 增强材料 机织物试验方法 第5部分: 玻璃纤维拉伸断裂强力和断裂伸长的测定 GB/T 7689.5-2001 3 耐碱强力保留率(耐碱性) 增强材料 机织物试验方法 第5部分: 玻璃纤维拉伸断裂强力和断裂伸长的测定 GB/T 7689.5-2001 玻璃纤维网布耐碱性试验方法 氢氧化钠溶液浸泡法 GB/T 20102-2006 膨胀聚苯板薄抹灰外墙外保温系统JG 149-2003 4 断裂伸长率 增强材料 机织物试验方法 第5部分: 玻璃纤维拉伸断裂强力和断裂伸长的测定 GB/T 7689.5-2001 5 玻璃纤维网格布 5 涂塑量(可燃物含量) 1006 增强制品试验方法 第2部分: 玻璃纤维可燃物含量的测定 GB/T 9914.2-2001 十二 道桥材料 1 沥青及沥青混合料 1 沥青针入度 1007 公路工程沥青及沥青混合料试验规程 JTG E20-2011 2 沥青延度 3 沥青软化点 4 沥青与粗集料的粘附性(水煮法) 5 密度试验(表干/水中/蜡封/体积法) 6 马歇尔稳定度试验 7 沥青路面芯样马歇尔试验 8 沥青含量试验(离心分离法) 9 矿料级配检验 公路工程集料试验规程 JTG E42—2005 10 配合比设计 公路沥青路面施工技术规范 JTG F40-2004 1 沥青及沥青混合料 11 理论最大相对密度(真空法) 1007 公路工程沥青及沥青混合料试验规程JTG E20-2011 十三 道路工程 1 路基路面 1 承载能力(弯沉试验) 1001 公路路基路面现场测试规程 JTG E60-2008 只做贝克曼梁法 2 抗滑性能 只做摆式仪法、手工铺砂法 3 厚度 只做挖坑及钻芯法 4 压实度 十四 玻璃 1 中空玻璃 1 露点 0310.01 中空玻璃GB/T 11944-2012 十五 电气材料 1 电线电缆 1 导体直流电阻 0424 电线电缆电性能试验方法 第4部分:导体直流电阻试验 GB/T 3048.4-2007 2 绝缘电阻试验 电线电缆电性能试验方法 第5部分:绝缘电阻试验 GB/T 3048.5-2007 3 交流电压试验 电线电缆电性能试验方法 第8部分:交流电压试验 GB/T 3048.8-2007 仅限:电压≤15kV 1 电线电缆 4 绝缘厚度 0424 电缆和光缆绝缘和护套材料通用试验方法 第11部分:通用试验方法 厚度和外形尺寸测量 机械性能试验 GB/T 2951.11-2008 5 尺寸 6 机械性能 7 热老化 电缆和光缆绝缘和护套材料通用试验方法 第12部分:通用试验方法 热老化试验方法 GB/T 2951.12-2008 8 密度 电缆和光缆绝缘和护套材料通用试验方法 第13部分: 通用试验方法 密度测定方法 吸水试验 收缩试验GB/T 2951.13-2008 9 收缩试验 10 低温试验 电缆和光缆绝缘和护套材料通用试验方法 第14部分:通用试验方法 低温试验 GB/T 2951.14-2008 11 高温压力试验 电缆和光缆绝缘和护套材料通用试验方法 第31部分:聚氯乙烯混合料专用试验方法 高温压力试验-抗开裂试验 GB/T 2951.31-2008 1 电线电缆 12 单根燃烧试验 电缆和光缆在火焰条件下的燃烧试验 第11部分:单根绝缘电线电缆火焰垂直蔓延试验 试验装置GB/T 18380.11-2008 电缆和光缆在火焰条件下的燃烧试验 第12部分:单根绝缘电线电缆火焰垂直蔓延试验 1kW预混合型火焰试验方法 GB/T18380.12-2008 电缆和光缆在火焰条件下的燃烧试验 第21部分:单根绝缘细电线电缆火焰垂直蔓延试验 试验装置GB/T 18380.21-2008 电缆和光缆在火焰条件下的燃烧试验 第22部分:单根绝缘细电线电缆火焰垂直蔓延试验 扩散型火焰试验方法 GB/T 18380.22-2008 十六 电气工程 1 电能质量 1 供电电压允许偏差 0425 电能质量 供电电压偏差GB/T12325-2008 建筑节能工程施工质量验收规范GB50411-2007 建筑节能工程施工验收规范 SZJG 31-2010 电压600V以下,电流1000A以下. 1 电能质量 2 公共电网谐波电压 0425 电能质量 电压波动和闪变GB12326-2008 建筑节能工程施工质量验收规范GB50411-2007 建筑节能工程施工验收规范 SZJG 31-2010 3 公共电网谐波电流 电能质量 公共电网谐波GB/T14549-1993 建筑节能工程施工质量验收规范GB50411-2007 建筑节能工程施工验收规范 SZJG 31-2010 4 三相电压不平衡度 电能质量 三相电压不平衡度 GB/T 15543-2008 建筑节能工程施工质量验收规范GB50411-2007 建筑节能工程施工验收规范 SZJG 31-2010 5 三相照明配电干线相负荷平衡率 建筑节能工程施工质量验收规范GB50411-2007 建筑节能工程施工验收规范 SZJG 31-2010 2 企业供配系统节能监测 1 供电电压偏差 0425 评价企业合理用电技术导则GB/T3485-1998 企业供配系统节能监测方法GB/T16664-1996 2 日负荷率 3 功率因数 4 谐波 2 企业供配系统节能监测 5 变压器负载系数 0425 评价企业合理用电技术导则GB/T3485-1998 企业供配系统节能监测方法GB/T16664-1996 3 三相异步电动机经济运行 1 输入有功功率 0425 三相异步电动机经济运行 GB/T 12497-2006 2 输入无功功率 3 功率因数 4 输入电压 5 输入电流 4 建筑与建筑群综合布线系统 1 链路长度 0419 综合布线系统工程验收规范 GB 50312-2007 2 接线图 3 衰减 4 近端串扰 十七 地基与基础工程 1 基桩 1 基桩承载力静载荷试验 1017 建筑基桩检测技术规范 JGJ 106-2003 建筑地基基础设计规范 GB 50007-2011 建筑地基基础检测规范 DBJ 15-60-2008 建筑基桩检测规程 SJG 09-2007 建筑桩基技术规范 JGJ 94-2008 1 基桩 2 桩身完整性超声波检测 1017 建筑基桩检测技术规范 JGJ 106-2003 建筑地基基础设计规范 GB 50007-2011 建筑地基基础检测规范 DBJ15-60-2008 建筑基桩检测规程 SJG 09-2007 建筑桩基技术规范 JGJ 94-2008 超声波检测混凝土缺陷技术规程CECS 21:2000 1 基桩 3 桩身完整性低应变动力检测 1017 建筑基桩检测技术规范 JGJ 106-2003 建筑地基基础设计规范 GB 50007-2011 建筑桩基技术规范 JGJ 94-2008 建筑基桩检测规程 SJG 09-2007 建筑地基基础检测规范 DBJ 15-60-2008 4 桩身完整性高应变动力检测 5 基桩承载力高应变动力检测 6 钻芯检测 1 基桩 7 桩内力 1017 建筑地基基础设计规范 GB 50007-2011 建筑基坑支护技术规程 JGJ 120-2012 建筑基坑工程监测技术规范 GB 50497-2009 深圳市基坑支护技术规范 SJG05-2011 深圳市地基基础勘察设计规范 SJG 01-2010 2 地基 1 地基承载力静荷载试验 1017 建筑地基基础设计规范 GB 50007-2011 建筑地基基础检测规范 DBJ15-60-2008 岩土工程勘察规范 GB 50021-2001(2009)深圳市地基基础勘察设计规范 SJG 01-2010 2 复合地基承载力静荷载试验 建筑地基处理技术规范 JGJ 79-2012 建筑地基基础设计规范 GB 50007-2011 建筑地基基础检测规范 DBJ15-60-2008 深圳地区地基处理技术规范 SJG 04-1996 岩土工程勘察规范 GB 50021-2001(2009) 深圳市地基基础勘察设计规范SJG01-2010 2 地基 3 地基土承载力(标准贯入试验) 1017 岩土工程勘察规范 GB 50021-2001(2009) 建筑地基基础检测规范 DBJ15-60-2008 深圳市地基基础勘察设计规范 SJG 01-2010 4 岩基承载力(岩基载荷试验) 建筑地基基础设计规范 GB 50007-2011 5 地基承载力(圆锥动力触探试验) 岩土工程勘察规范 GB 50021-2001(2009) 建筑地基基础检测规范 DBJ15-60-2008 深圳市地基基础勘察设计规范 SJG 01-2010 圆锥动力触探试验规程 YS 5219-2000 6 锚杆(土钉)抗拔承载力试验 建筑基坑支护技术规程 JGJ 120-2012 深圳市基坑支护技术规范 SJG05-2011 建筑边坡工程技术规范 GB50330-2002 锚杆喷射混凝土支护技术规范 GB 50086-2001 建筑地基基础设计规范 GB 50007-2011 深圳市地基基础勘察设计规范SJG01-2010 3 建筑边坡 1 水平位移 1017 建筑边坡工程技术规范 GB50330-2002 工程测量规范 GB 50026-2007 深圳市地基基础勘察设计规范 SJG 01-2010 2 垂直位移 3 地表裂缝 4 喷射混凝土质量 4 建筑基坑 1 水平位移 1017 建筑地基基础设计规范 GB 50007-2011 建筑基坑工程监测技术规范GB50497-2009 建筑基坑支护技术规程 JGJ120-2012 深圳市基坑支护技术规范 SJG05-2011 工程测量规范 GB 50026-2007 深圳市地基基础勘察设计规范 SJG 01-2010 2 垂直位移 4 建筑基坑 3 地下水位 1017 建筑地基基础设计规范 GB 50007-2011 建筑基坑工程监测技术规范GB50497-2009 建筑基坑支护技术规程 JGJ120-2012 深圳市基坑支护技术规范 SJG05-2011 工程测量规范 GB 50026-2007 深圳市地基基础勘察设计规范 SJG 01-2010 4 建筑基坑 4 基坑底隆起 1017 建筑地基基础设计规范 GB 50007-2011 建筑基坑支护技术规程 JGJ120-2012 建筑基坑工程监测技术规范 GB 50497-2009 深圳市基坑支护技术规范 SJG05-2011 工程测量规范 GB 50026-2007 深圳市地基基础勘察设计规范 SJG 01-2010 4 建筑基坑 5 土层孔隙水压力 1017 建筑地基基础设计规范 GB 50007-2011 建筑基坑工程监测技术规范 GB 50497-2009 建筑基坑支护技术规程 JGJ120-2012 深圳市基坑支护技术规范 SJG05-2011 深圳市地基基础勘察设计规范 SJG 01-2010 6 土体分层竖向位移 7 支护结构内力 8 土压力监测 9 地表裂缝 建筑基坑工程监测技术规范 GB 50497-2009 深圳市地基基础勘察设计规范 SJG 01-2010 工程测量规范 GB 50026-2007 10 周边建筑裂缝 4 建筑基坑 11 喷射混凝土质量 1017 建筑基坑支护技术规程 JGJ120-2012 深圳市基坑支护技术规范 SJG05-2011 锚杆喷射混凝土支护技术 GB50086-2001 深圳市地基基础勘察设计规范 SJG 01-2010 12 深层土体水平位移 建筑地基基础设计规范 GB 50007-2011 建筑基坑工程监测技术规范 GB 50497-2009 深圳市基坑支护技术规范 SJG05-2011 5 锚杆内力测试 1 锚杆锁定力 1017 深圳市基坑支护技术规范 SJG05-2011 锚杆喷射混凝土支护技术 GB50086-2001 岩土锚杆(索)技术规程 CECS 22:2005 建筑边坡工程技术规范 GB 50330-2002 建筑基坑支护技术规程 JGJ120-2012 建筑地基基础设计规范 GB 50007-2011 深圳市地基基础勘察设计规范 SJG 01-2010 2 锚杆内力监测 6 土工试验 1 含水率 1008.07 土工试验方法 GB/T 50123-1999 公路土工试验规程 JTJ E40-2007 只测:烘箱干燥法、酒精燃烧法 2 密度 只测:环刀法 3 击实试验 十八 主体结构工程 1 混凝土结构 1 混凝土强度 1017 超声回弹综合法检测混凝土强度技术规程 CECS 02:2005 回弹法检测混凝土抗压强度技术规程 JGJ/T23-2011 钻芯法检测混凝土强度技术规程CECS03:2007 建筑结构检测技术标准 GB/T 50344-2004 只测:回弹法、超声回弹综合法、钻芯法/ 2 保护层厚度 混凝土中钢筋检测技术规程 JGJ/T 152-2008 混凝土结构工程施工质量验收规范GB 50204-2002(2011) 3 混凝土缺陷 超声法检测混凝土缺陷技术规程CECS21:2000 只测:裂缝深度、不密实区和空洞、混凝土结合面质量、表面损伤层 1 混凝土结构 4 钢筋数量、钢筋直径、钢筋间距 1017 混凝土中钢筋检测技术规程 JGJ/T 152-2008 5 结构/构件承载力 混凝土结构试验方法标准 GB/T 50152-2012 6 尺寸与偏差 建筑结构检测技术标准 GB/T 50344-2004 混凝土结构工程施工质量验收规范GB 50204-2002(2011) 2 砌体结构 1 砖抗压强度 1017 回弹仪评定烧结普通砖强度等级的方法 JC/T 796-1999 砌体工程现场检测技术标准GB/T 50315-2011 只测回弹法 2 砌筑砂浆抗压强度 贯入法检测砌筑砂浆抗压强度技术规程 JGJ/T136-2001 砌体工程现场检测技术标准 GB/T 50315-2011 只测:回弹法 3 砌体抗压强度 砌体工程现场检测技术标准 GB/T 50315-2011 只测:原位轴压法 4 尺寸与偏差 建筑结构检测技术标准 GB/T 50344-2004 砌体结构工程施工质量验收规范GB/T 50203-2011 3 后置埋件 1 锚固抗拔承载力 1017 建筑锚栓抗拉拔、抗剪性能试验方法DG/TJ08-003-2000 混凝土后锚固件抗拔和抗剪性能检测技术规程 DBJ/T 15-35-2004 混凝土结构后锚固技术规程JGJ145-2004 混凝土结构加固设计规范GB50367-2006附录N 4 饰面砖 1 粘结强度 1017 建筑工程饰面砖粘结强度检验标准JGJ110-2008 5 碳纤维片材 1 粘结强度 1017 碳纤维片材加固混凝土结构技术规程CECS 146:2003(2007) 6 抹灰砂浆 1 拉伸粘结强度 1017 抹灰砂浆技术规程(附录A)JGJ/T220-2010 7 粘钢板 1 拉拔 1017 混凝土结构加固设计规范 (附录E)GB50367-2006 十九 钢结构 钢结构 1 射线法(RT) 1101 金属熔化焊焊接接头射线照相 GB/T 3323-2005 钢结构工程质量施工验收规范 GB 50205-2001 钢结构 2 超声法(UT) 1101 钢焊缝手工超声波探伤方法和探伤结果分级 GB/T 11345-1989 钢结构超声波探伤及质量分级法JG/T203-2007 钢结构现场检测技术标准GB/T50621-2010 3 磁粉法(MT) 无损检测 焊缝磁粉检测 JB/T 6061-2007 铸钢件磁粉检测 GB/T 9444-2007 钢结构现场检测技术标准GB/T50621-2010 1 钢结构 4 渗透法(PT) 1101 钢锻件液体渗透检验方法 JB/T8466-1996 铸钢件渗透检测 GB/T 9443-2007 无损检测 焊缝渗透检测 JB/T 6062-2007 钢结构现场检测技术标准GB/T50621-2010 5 构件厚度 无损检测 接触式超声脉冲回波法测厚方法 GB/T 11344-2008 钢结构现场检测技术标准GB/T50621-2010 6 钢结构防腐涂料涂层厚度 磁性基体上非磁性覆盖层 覆盖层厚度测量 磁性法 GB/T 4956-2003 1 钢结构 7 钢结构防火涂料涂层厚度 1101 磁性基体上非磁性覆盖层 覆盖层厚度测量 磁性法 GB/T 4956-2003 钢结构工程施工质量验收规范GB50205-2001 8 焊缝外观 钢结构工程施工质量验收规范 GB 50205-2001 钢结构现场检测技术标准GB/T50621-2010 9 外观 钢结构现场检测技术标准 GB/T50621-2010 10 尺寸与偏差 11 损伤 建筑结构检测技术标准 GB/T 50344-2004钢 结构现场检测技术标准GB/T50621-2010 12 局部变形 钢结构现场检测技术标准 GB/T50621-2010 13 承载力 建筑结构检测技术标准 GB/T 50344-2004 钢结构检测评定及加固技术规程 YB 9257-1996 钢结构工程施工及验收规范 GB 50205-2001 1 钢结构 14 变形监测 1101 建筑变形测量规范 JGJ 8-2007 钢结构现场检测技术标准GB/T50621-2010 钢结构工程施工质量验收规范 GB 50205-2001 2 钢结构节点 1 抗拉强度 0301.01 钢网架螺栓球节点JG 10-2009 钢网架焊接空心球节点 JG 11-2009 3 机械连接用紧固标准件及高强度螺栓 1 抗拉强度 0301.01 金属材料 拉伸试验 第1部分:室温试验方法 GB/T228.1-2010 2 抗剪强度 销剪切试验方法GB/T13683-1992 3 实物楔负载 紧固件机械性能 螺栓、螺钉和螺柱 GB/T3098.1-2010 4 连接副紧固轴力 钢结构用扭剪型高强度螺栓连接副GB/T 3632-2008 (不测M27、M30) 5 连接副的扭矩系数 钢结构用高强度大六角头螺栓、大六角螺母、垫圈技术条件 GB/T 1231-2006 钢结构工程施工质量验收规范 GB 50205-2001 3 机械连接用紧固标准件及高强度螺栓 6 抗滑移系数 0301.01 钢结构工程施工质量验收规范 GB 50205-2001 二十 建筑物 1 建筑物变形 1 沉降观测 1017 建筑变形测量规范 JGJ 8-2007 工程测量规范 GB 50026-2007 只做:二级、三级. 2 倾斜观测 3 裂缝观测 建筑变形测量规范 JGJ 8-2007 建筑结构检测技术标准 GB/T 50344-2004 混凝土结构试验方法标准 GB/T 50152-2012 4 挠度 建筑变形测量规范 JGJ 8-2007 2 主体结构 1 位移 1017 混凝土结构试验方法标准 GB/T 50152-2012 2 速度 爆破安全规程 GB 6722-2003 3 加速度 住宅建筑室内振动限值及其测量方法标准 GB/T50355-2005 4 频率 住宅建筑室内振动限值及其测量方法标准 GB/T50355-2005 爆破安全规程GB 6722-2003 2 主体结构 5 应变 1017 混凝土结构试验方法标准 GB/T 50152-2012 二十一 空气质量 1 室内环境污染物 1 氡238 环境空气中氡的标准测量方法GB/T14582-1993 2 游离甲醛 公共场所空气中甲醛测定方法GB/T18204.26-2000 3 苯 民用建筑工程室内环境污染控制规范 GB50325-2010 4 氨 公共场所空气中氨测定方法GB/T18204.25-2000 5 TVOC 民用建筑工程室内环境污染控制规范 GB50325-2010 2 空气 1 温度 0238 公共场所空气温度测定方法GB/T18204.13-2000 2 相对湿度 公共场所空气湿度测定方法GB/T18204.14-2000 3 空气流速 公共场所风速测定方法GB/T18204.15-2000 4 新风量 公共场所室内新风量测定方法GB/T18204.18-2000 5 SO2 环境空气 二氧化硫的测定 甲醛吸收- 副玫瑰苯胺分光光度法 HJ 482-2009 6 NO2 环境空气 二氧化氮的测定 Saltzman法GB/T15435-1995 7 CO 公共场所空气中一氧化碳测定方法GB/T18204.23-2000 2 空气 8 CO2 0238 公共场所空气中二氧化碳测定方法GB/T18204.24-2000 9 氨 公共场所空气中氨测定方法GB/T18204.25-2000 10 甲醛 公共场所空气中甲醛测定方法GB/T18204.26-2000 11 臭氧 公共场所空气中臭氧测定方法GB/T18204.27-2000 12 苯 居住区大气中苯、甲苯和二甲苯卫生检验标准方法 气相色谱法GB/T11737-1989 13 甲苯 环境空气 苯系物的测定 固体吸附/热脱附-气相色谱法 HJ 583-2010 14 二甲苯 15 可吸入颗粒物 室内空气中可吸入颗粒物卫生标准GB/T17095-1997 16 TVOC 民用建筑工程室内环境污染控制规范 GB50325-2010 17 氡 环境空气中氡的标准测量方法GB/T14582-1993 18 总悬浮颗粒物 环境空气 总悬浮颗粒物的测定 重量法 GB/T15432-1995 19 γ辐射剂量率 环境地表γ辐射剂量率测定规范GB/T14583-1993 二十二 水质测定 1 水1PH值0233 水质 PH值的测定 玻璃电极法GB6920-1986 1 水2溶解氧 0233 水质 溶解氧的测定 电化学探头法HJ 506-2009 3 悬浮物 水质 悬浮物的测定 重量法GB11901-1989 4 生化需氧量(BOD5) 水质 五日生化需氧量(BOD5)的测定稀释与接种法 HJ 505-2009 5 化学需氧量(COD) 水质 化学需氧量的测定 重铬酸盐法 GB11914-1989 1 水6铜233 地表水和污水监测技术规范 HJ/T 91-2002 7 锌8铅9镉10 镍 水质 镍的测定 火焰原子吸收分光光度法 GB/T 11912-1989 地表水和污水监测技术规范 HJ/T 91-2002 11 六价铬 水质 六价铬的测定 二苯碳酰二肼分光光度法 GB/T 7467-1987 地表水和污水监测技术规范 HJ/T 91-2002 12 总氮 水质 总氮的测定碱性过硫酸钾消解紫外分光光度法 HJ 636—2012 13 总磷 水质 总磷的测定 钼酸铵分光光度法 GB 11893-1989 14 氨氮 水质 氨氮的测定 纳氏试剂分光光度法 HJ 535-2009 二十三 太阳能应用系统 1 独立光伏系统 1 光伏阵列输出电流和压值 1515 独立光伏系统-设计验证 IEC 62124:2004 只测:对电流、电压、温度、辐照度参数进行检验 2 负载电流和电压值 3 环境温度 4 光伏组件温度 5 蓄电池温度 6 太阳辐照度 2 并网光伏系统(光伏系统电能质量) 1 谐波和波形畸变 1515 光伏系统并网技术要求GB/T19939-2005 只测:对已通过本标准中安全和防护检验合格的产品进行检验. 2 频率 3 电压偏差 4 三相电压不平衡度 3 并网光伏系统(光伏系统电性能) 1 电流 1515 光伏系统性能监测、测量、数据交换和分析导则 GB/T20513-2006 只测:对参数进行测量,不能进行分析 2 电压 3 有功功率 4 无功功率 5 功率因数 4 并网光伏系统(光伏系统环境参数) 1 环境温度 1515 光伏系统性能监测、测量、数据交换和分析导则 GB/T20513-2006 只测:对参数进行测量,不能进行分析 2 组件温度 3 太阳辐照度 二十四 红外热成像 1 建筑外墙饰面层 1 粘结缺陷 1207 红外热像法检测建筑外墙饰面层粘结缺陷技术规程 CECS204:2006 2 带电设备 1 温差 带电设备红外诊断应用规范 DL/T 664-2008 二十五 节能检测 1 热舒适度 1 空气温度 1519 中等热环境 PMV和PPD指数的测定及热舒适 GB/T 18049-2000 2 湿度 1 热舒适度 3 黑球温度 1519 热环境 根据WBGT指数(湿球黑球温度)对作业人员热负荷的评价GB/T17244-1998 4 相对空气流速 中等热环境 PMV和PPD指数的测定及热舒适 GB/T 18049-2000 2 室外太阳辐射 1 太阳总辐射 1519 地面气象观测规范 第11部分:辐射观测 QX/T55-2007 2 太阳散射辐射 3 外墙节能构造 1 外墙节能构造钻芯检验 1017 建筑节能工程施工质量验收规范GB50411-2007 附录C建筑节能工程施工验收规范SZJG 31-2010附录E 4 工业锅炉节能监测 1 排烟温度 1102 燃煤工业锅炉节能监测GB/T15317-2009 2 空气系数 3 炉体外表面温度 5 工业锅炉热工性能 1 热效率 1102 工业锅炉热工性能试验规程GB/T 10180-2003 不测:燃料及燃烧产物分析 6 锅炉大气污染物排放 1 SO2浓度 1102 锅炉大气污染物排放标准GB 13271-2001 2 NOX浓度 7 热力系统节能监测 1 外表面温度 1102 热力输送系统节能监测方法GB/T15910-2009 2 环境温度 3 环境风速 二十六 建筑声环境 1 建筑隔声 1 现场空气声?隔声 1404.06 声学 建筑和建筑构件隔声测量 第4部分:房间之间空气声隔声的现场测量 GB/T 19889.4-2005 声学 建筑和建筑构件隔声测量 第5部分:外墙构件和外墙空气声隔声的现场测量 GB/T 19889.5-2006 2 现场撞击声?隔声 声学 建筑和建筑构件隔声测量 第7部分:楼板撞击声隔声的现场测量 GB/T 19889.7-2005 2 体育馆声学 1 混响时间 1404.06 体育馆声学设计和测量规程 JGJ/T 131-2012 2 背景噪声 3 最大声压级 4 传输频率特性 5 传声增益 6 声场不均匀度 3 厅堂混响时间 1 混响时间 1404.07 厅堂混响时间测量规程 GBJ 76-1984 4 环境噪声 1 噪声 1404.021404.06 工业企业厂界环境噪声排放标准GB 12348-2008 声环境质量标准 GB 3096-2008 声学 环境噪声的描述、测量与评价 第1部分:基本参量与评价方法GB/T3222.1-2006 声学 环境噪声的描述、测量与评价 第2部分:环境噪声级测定GB/T3222.2-2009 建筑施工场界环境噪声排放标准GB 12523-2011 社会生活环境噪声排放标准GB22337-2008 二十七 型材及密封胶 1 型材 (门窗型材) 1 尺寸 0315 铝合金建筑型材 第1部分:基材GB 5237.1-2008 铝合金建筑型材 第2部分:阳极氧化型材 GB 5237.2-2008 铝合金建筑型材 第3部分:电泳涂漆型材GB 5237.3-2008 铝合金建筑型材 第4部分:粉末喷涂型材GB 5237.4-2008 铝合金建筑型材 第5部分:氟碳漆喷涂型材 GB 5237.5-2008 门、窗用未增塑聚氯乙烯(PVC-U)型材 GB/T8814-2004 铝幕墙板、板基 YS/T429.1-2000 铝幕墙板 第2部分:有机聚合物喷涂铝单板 YS/T 429.2-2012 2 外观 3 抗拉强度 金属材料 拉伸试验 第1部分:室温试验方法 GB/T228.1-2010 4 伸长率 5 膜厚/涂层厚度 非磁性基体金属上非导电覆盖层厚度测量 涡流方法 GB/T4957-2003 1 型材 (门窗型材) 6 氧化膜封孔质量 0315 铝及铝合金阳极氧化 氧化膜封孔质量的评定方法 第2部分:硝酸预浸的磷铬酸法 GB/T 8753.2-2005 7 漆膜附着力/附着力 漆膜附着力测定法 GB1720-1979 色漆和清漆 漆膜的划格试验 GB/T9286-1998 8 耐沸水性 铝合金建筑型材 第3部分:电泳涂漆型材 GB 5237.3-2008 铝合金建筑型材 第4部分:粉末喷涂型材 GB 5237.4-2008 9 耐盐酸性 铝合金建筑型材 第3部分:电泳涂漆型材 GB 5237.3-2008 铝合金建筑型材 第4部分:粉末喷涂型材 GB 5237.4-2008 铝合金建筑型材 第5部分:氟碳漆喷涂型材 GB 5237.5-2008 10 耐溶剂性 11 耐冲击性 铝合金建筑型材 第4部分:粉末喷涂型材 GB 5237.4-2008 铝合金建筑型材 第5部分:氟碳漆喷涂型材 GB 5237.5-2008 1 型材 (门窗型材) 12 漆膜硬度 0315 色漆和清漆 铅笔法测定漆膜硬度GB/T 6739-2006 13 维卡软化温度 热塑性塑料维卡软化温度(VST)的测定 GB/T1633-2000 14 加热后状态 门、窗用未增塑聚氯乙烯(PVC-U)型材 GB/T8814-2004 15 加热后尺寸变化率 16 纵向剪切试验 铝合金建筑型材 第6部分:隔热型材 GB 5237.6-2012 17 横向拉伸试验 18 落锤冲击 门、窗用未增塑聚氯乙烯(PVC-U)型材 GB/T8814-2004 19 可焊接性 20 主型材质量 2 硅酮结构密封胶 1 邵尔硬度 0318 硫化橡胶或热塑性橡胶 压入硬度试验方法 第1部分:邵氏硬度计法(邵尔硬度) GB/T531.1-2008 2 表干时间 建筑密封材料试验方法 第5部分:表干时间的测定 GB/T13477.5-2002 3 流动性 建筑密封材料试验方法 第6部分:流动性的测定 GB/T13477.6-2002 2 硅酮结构密封胶 4 拉伸粘结性 0318 建筑密封材料试验方法 第8部分:拉伸粘结性的测定 GB/T13477.8-2002 2 硅酮结构密封胶 5 浸水后拉伸粘结强度 建筑密封材料试验方法 第9部分:浸水后拉伸粘结性的测定GB/T13477.9-2002 6 热老化 建筑用硅酮结构密封胶 GB16776-2005 7 与附件相容性 8 与基材相容性 二十八 通风与空调工程 1 通风空调 1 风速和风量 0343.04 通风空调工程施工质量验收规范GB50243-2002 组合式空调机组 GB/T14294-2008 2 风压 3 漏光 通风空调工程施工质量验收规范GB50243-2002 通风管道技术规程 JGJ141-2004 4 漏风量 5 耐压强度 通风管道技术规程 JGJ141-2004 6 水压力 通风空调工程施工质量验收规范GB50243-2002 7 转速 8 温度 公共建筑节能检测标准 JGJ/T 177-2009 9 水流量 给排水用超声流量计(传播速度差法) CJ/T 3063-1997 1 通风空调 10 功率 0343.04 直接作用模拟指示电测量仪表及其附件 第3部分: 功率表和无功功率表的特殊要求 GB/T 7676.3-1998 11 耗电输热比 公共建筑节能设计标准 GB 50189-2005 12 单位风量耗功率 13 噪声声压级 采暖通风与空气调节设备噪声声功率级的测定-工程法 GB9068-1988 2 玻璃纤维增强塑料冷却塔 1 热力性能 0343.04 玻璃纤维增强塑料冷却塔 第1部分:中小型玻璃纤维增强塑料冷却塔GB 7190.1-2008 冷却塔验收测试规程 CECS118-2000 2 噪声 3 耗电比 4 空塔风量 5 飘水率 3 空调通风系统运行管理综合效果 1 室内温度 0343.04 公共场所空气温度测试方法GB/T18204.13-2000 2 室内相对湿度 公共场所空气湿度测试方法GB/T18204.14-2000 3 室内气流速度 公共场所空气流速测定方法GB/T18204.15-2000 4 新风量 公共场所新风量测定方法GB/T18204.18-2000 3 空调通风系统运行管理综合效果 5 室内噪声 0343.04 公共场所噪声测定方法GB/T18204.22-2000 6 一氧化碳 公共场所中一氧化碳测定方法GB/T18204.23-2000 7 二氧化碳 公共场所二氧化碳测定方法GB/T18204.24-2000 8 设备及管道保温 设备及管道绝热效果的测试与评价GB/T 8174-2008 4 空气调节系统经济运行 1 单位面积空调能耗 0343.04 空气调节系统经济运行GB/T17981-2007 2 单位面积空调耗冷量 3 空调系统能效比 4 制冷系统能效比 5 冷冻水输送系数 6 空调末端能效比 7 冷水机组运行效率 8 冷却水输送系数 5 风机机组与管网系统节能监测 1 风机全压 0343.04 风机机组与管网系统节能监测方法GB/T15913-2009 2 风机流量 3 风机机组电能利用率 5 风机机组与管网系统节能监测 4 电动机负载率 0343.04 风机机组与管网系统节能监测方法GB/T15913-2009 6 空气压缩机组及供气系统节能监测 1 排气温度 0343.04 空气压缩机组及供气系统节能监测方法GB/T16665-1996 2 冷却水进水温度 3 冷却水进出水温度差 4 空气压缩机组用电单耗 7 泵类液体输送系统节能监测 1 电动机负载率 0343.04 泵类液体输送系统节能监测GB/T16666-2012 2 泵类及效率 3 泵类及液体输送系统效率 二十九 建筑光环境 1 建筑采光 1 采光系数 0343.04 采光测量方法 GB/T 5699-2008 2 反射比/反射系数 3 透射比 2 照明工程 1 照度 0343.04 照明测量方法 GB/T 5700-2008 体育场馆照明设计及检测标准 JGJ 153-2007 2 照明功率密度 照明测量方法 GB/T 5700-2008 3 亮度 4 显色指数 照明测量方法 GB/T 5700-2008 体育场馆照明设计及检测标准 JGJ 153-2007 5 相关色温 CHINA NATIONAL ACCREDITATION SERVICE FOR CONFORMITY ASSESSMENT APPENDIX OF ACCREDITATION CERTIFICATE (Registration No. CNAS L0931) NAME:Shenzhen Institute of Building Research Co., Ltd. ADDRESS:No.29, Mei'ao 3rd Road, Upper Meilin, Futian District, Shenzhen, Guangdong, China Accreditation Criteria:ISO/IEC 17025:2005 and relevant requirements of CNAS Date of Issue:2012-01-18 Date of Expiry:2015-01-17 Date of Update:2013-02-16 APPENDIX 2 ACCREDITED TESTING № Test Object Item/Parameter Code of Field Title, Code of Standard or Method Limitation Note № Item/ Parameter Ⅰ Concrete material 1 Cement 1 Setting time 1001 Test methods for water requirement of normal consistency,setting time and soundness of the portland cements GB/T1346-2011 2 Soundness 3 Water requirement for normal consistency for cement paste 1 Cement 4 Fineness 1001 The test sieving method for fineness of cement GB/T1345-2005 Testing method for specific surface of cement - Blaine method GB/T8074-2008 5 Mortar strength(IS0) Method of testing cements--Determination of strength GB/T17671-1999 6 Mortar strength(rapid method) Accelerated test method for cement strength JC/T738-2004 7 Mortar fluidity Test method for fluidity of cement mortar GB/T2419-2005 8 Density Standard test method for cement density GB/T208-1994 1 Cement 9 Loss on ignition 1001 Method for chemical analysis of cement GB/T176-2008 10 Oxidation of sulfide 11 Potassium oxide and sodium oxide 2 Common portland cement Part parameters. 1001 Common portland cement GB175-2007 Accredited only for:Setting time,Soundness,Water requirement for normal consistency for cement paste,Fineness,Mortar strength(IS0),Mortar strength(rapid method),Mortar fluidity,Density,Loss on ignition,Oxidation of sulfide,Potassium oxide and sodium 3 White portland cement Part parameters. 1001 White portland cement GB2015-2005 Accredited only for:Setting time,Soundness,Water requirement for normal consistency for cement paste,Fineness,Mortar strength(IS0),Potassium oxide and sodium oxide 4 Masonry cement Part parameters. 1001 Masonry cement GB/T 3183-2003 Accredited only for:Setting time,Soundness,Water requirement for normal consistency for cement paste,Fineness,Mortar strength(IS0),Potassium oxide and sodium oxide 5 Sand 1 Sieve analysis/particle size grading 1006 Standard for technical requirements and test method of sand and crushed stone (or gravel) for ordinary concrete JGJ52-2006 2 Apparent density 3 Stacking density 4 Compact density 5 Soil content 6 Soil block content 7 Stone powder content 8 Water absorption 9 Water content 10 Content of chloride ion 11 Organism content 12 Mica content 13 Alkali activity 14 Soundness 5 Sand 15 Content of light substance 1006 Standard for technical requirements and test method of sand and crushed stone (or gravel) for ordinary concrete JGJ52-2006 16 SulpHide and sulpHate content 6 Stone 1 Sieve analysis/particle size grading 1006 Standard for technical requirements and test method of sand and crushed stone (or gravel) for ordinary concrete JGJ52-2006 2 Apparent density 3 Stacking density 4 Compact density 5 Soil content 6 Soil block content 7 Water content 8 Water absorption 9 Organism content 6 Stone 10 Soundness 1006 Standard for technical requirements and test method of sand and crushed stone (or gravel) for ordinary concrete JGJ52-2006 6 Stone 11 Content of spiculate and flaky grain 1006 12 SulpHide and sulpHate content 13 Compressive strength of rock Standard for technical requirements and test method of sand and crushed stone (or gravel) for ordinary concrete JGJ52-2006 Standard for tests method of engineering rock massas GB/T 50266-2013 6 Stone 14 Crushing index 1006 Standard for technical requirements and test method of sand and crushed stone (or gravel) for ordinary concrete JGJ52-2006 15 Alkali activity/alkali-aggregate reaction 16 Grain content? of Hill cover and Incrustation of crushed rock Specifications for Concrete Construction of Port and Waterway Engineering JTS 202-2011 7 Lightweight aggregates 1 Sieve analysis/particle size grading 1006 Lightweight aggregates and its test methods. Part 2: Test methods for lightweight aggregates GB/T 17431.2-2010 2 Compact density 3 Grain strength 4 Water absorption 5 Soften coefficient 7 Lightweight aggregates 6 Boiling weight loss 1006 Lightweight aggregates and its test methods. Part 2: Test methods for lightweight aggregates GB/T 17431.2-2010 7 Loss on ignition 8 Soil content 9 Sulhpide and sulpHate content 8 Water for concrete 1 pH value 1016 Water quality--Determination of pH value--Glass electrode method GB/T 6920-1986 2 Insoluble matter Water quality--Determination of suspended substance—Gravimetric method GB/T 11901-1989 3 Soluble matter Standard examination methods for drinking water organoleptic and pHysical parameters GB 5750.4-2006 8 Water for concrete 4 Chloride 1016 Water quality--Determination of chloride--Silver nitratetitration method GB/T 11896-1989 5 SulpHate content Water quality--Determination of sulfate--Gravimetric method GB/T 11899-1989 6 Alkali content Method for chemical analysis of cement GB/T176-2008 7 Setting time Test methods for water requirement of normal consistency,setting time and soundness of the portland cements GB/T1346-2011 8 Setting time difference 9 Compressive strength ratio Method of testing cements--Determination of strength GB/T17671-1999 9 Admixture 1 Solid content 1002 Methods for testing uniformity of concrete admixture GB/T8077-2012 9 Admixture 2 Water content 1002 Methods for testing uniformity of concrete admixture GB/T8077-2012 Concrete anti-freezing admixtures JC 475-2004 9 Admixture 3 Density 1002 Methods for testing uniformity of concrete admixture GB/T8077-2012 4 Content of chloride ion 5 Fluidity for cement paste 6 Work-ability of cement mortar 7 pH value 8 Water reducing ratio Concrete admixtures GB 8076-2008 9 Fineness The test sieving method for fineness of cement GB/T1345-2005 Methods for testing uniformity of concrete admixture GB/T8077-2012 9 Admixture 10 Sodium sulpHate 1002 Methods for testing uniformity of concrete admixture GB/T8077-2012 11 Air content Standard for test method of performance on ordinary fresh concrete GB/T 50080-2002 12 Frost resistance Standard for test methods of long-term performance and durability of ordinary concrete GB/T 50082-2009 13 Total alkali content Methods for testing uniformity of concrete admixture GB/T8077-2012 Method for chemical analysis of cement GB/T176-2008 9 Admixture 14 Setting time/Setting time defference 1002 Concrete admixtures GB8076-2008 Test methods for water requirement of normal consistency,setting time and soundness of the portland cements GB/T1346-2011 Flash setting admixtures for shotcrete JC477-2005 Testing methods of mortar basic propertyJ GJ/T 70-2009 15 Compressive strength ratio Concrete admixtures GB8076-2008Water-repellent admixture for mortar and concrete JC 474-2008 Flash setting admixtures for shotcrete JC477-2005 16 Shrinkage ratio Concrete admixtures GB8076-2008 Water-repellent admixture for mortar and concrete JC 474-2008 9 Admixture 17 1 hour variation(Slump/Gas content) 1002 Concrete admixtures GB 8076-2008 18 Ratio of water-segregation rate at normal atmospHeric pressure 19 Soundness of cement paste Test methods for water requirement of normal consistency,setting time and soundness of the portland cements GB/T1346-2011 9 Admixture 20 Leaking pressure ratio 1002 Water-repellent admixture for mortar and concrete JC 474-2008 21 Water sorption ratio in 48h 22 Leaking height ratio 23 Percentage of restrained expansion Expansive agents for concrete GB 23439-2009 9 Admixture 24 Compressive strength 1002 Expansive agents for concrete GB 23439-2009 Method of testing cements--Determination of strength GB/T17671-1999 25 Availability index Mineral admixtures for high strength and high performanceconcrete GB/T18736-2002 26 Water requirement ratio 27 Vertical expansion ratio Code for utility technical of concrete admixture GB50119-2003 10 Adds 1 Fineness 1001 Fly ash used for cement and concrete GB/T1596-2005 2 Water requirement ratio 3 Water content Method for chemical analysis of cement GB/T176-2008 4 Loss on ignition 5 SulpHur trioxide 10 Adds 6 Density 1001 Standard test method for cement density GB/T208-1994 7 Availability index Ground granulated blast furnace slag used for cement and concrete GB/T 18046-2008 8 Fluidity ratio 11 Ordinary concrete 1 Slump and slump flow 1002 Standard for test method of performance on ordinary fresh concrete GB/T50080-2002 2 Setting time of concrete mixed 3 Bleeding of concrete mixed 11 Ordinary concrete 4 Apparent density of concrete mixed 1002 Standard for test method of performance on ordinary fresh concrete GB/T50080-2002 5 Air content of concrete mixed 11 Ordinary concrete 6 Compressive strength 1002 Standard for test method of mechanical properties on ordinary concrete GB/T50081-2002 Technical specification for testing concrete strength with drilled core CECS 03-2007 7 Modulus of elasticity in static compression Standard for test method of mechanical properties on ordinary concrete GB/T50081-2002 8 Tensile strength 9 Bending strength 10 Frost resistance Testing methods for long-term and long-lasting performance of ordinary concrete GB/T 50082-2009 11 Permeability resistance 12 shrinkage 11 Ordinary concrete 13 Mix proportion design of ordinary concrete 1002 Specification for mix proportion design of ordinary concrete JGJ 55-2011 14 Content of chloride ion Technical standard for inspection of building structure GB/T 50344-2004 15 concrete electric flux Testing methods for long-term and long-lasting performance of ordinary concrete GB/T 50082-2009 12 Cementitious grout 1 Grain size 1001 Cementitious grout JC/T986-2005 2 Setting time 3 Bleeding rate 4 Fluidity 5 Compressive strength Cementitious grout JC/T986-2005 Code for acceptance of constructional quality of concrete structures GB50204-2002(2011) 6 Vertical expansion ratio Cementitious grout JC/T986-2005 13 Carbon fiber laminate 1 Tensile strength 1002 Test method for tensile properties of oriented fiber reinforced plastics GB/T3354-1999 2 Tensile modulus of elasticity 3 the elongation of tensile fracture Ⅱ Masonry materials 1 Brick 1 Dimension 1009 Test methods for wall bricks GB/T2542-2012 2 Appearance 3 Water absorption and saturation coefficient 4 Bulk density 5 Dry shrinkage 1 Brick 6 Bending strength 1009 Precast concrete paving units JC/T 446-2000 Test methods for wall bricks GB/T2542-2012 Water permeable Brick JC/T 945-2005 7 Compression strength 8 Wearability Test method for abrasion resistance of inorganic paving materials GB/T12988-2009 9 Coefficient of percolating water Water permeable Brick JC/T 945-2005 2 Concrete curbs 1 Bending strength 1016 Concrete curbs JC899-2002 2 Compression strength 3 Water absorption 4 Appearance 5 Dimension 3 Block 1 Dimension 1009 Test methods for the small concrete hollow blockGB/T4111-1997Gypsum blocksJC/T698-2010 3 Block 2 Appearance 1009 Test methods for the small concrete hollow block GB/T4111-1997 3 Bulk density /Drying bulk density Test methods for the small concrete hollow block GB/T4111-1997T est methods of autoclaved aerated concrete GB/T11969-2008 4 Void content Test methods for the small concrete hollow block GB/T4111-1997 5 Water content Test methods for the small concrete hollow block GB/T4111-1997 Test methods of autoclaved aerated concrete GB/T11969-2008 6 Water absorption 7 Compressive strength 8 Bending strength 9 Permeability resistance Test methods for the small concrete hollow block GB/T4111-1997 3 Block 10 Drying shrinkage 1009 Test methods of autoclaved aerated concrete GB/T11969-2008 11 Axial compressive strength 12 Tensile strength 4 Partition-ing 1 Appearance 1016 Light weight concrete?panels JG/T 350-2011 Light weight panels for partition walls used in buildings JG/T 169-2005 Double skin metal faced insulating panels for building GB/T 23932-2009 Hollow concrete panel contained solid wastes for partition wall GB/T 23449-2009 2 Dimension 4 Partition-ing 3 Impact resistance 1016 Light weight concrete?panels JG/T 350-2011 Light weight panels for partition walls used in buildings JG/T 169-2005 Hollow concrete panel contained solid wastes for partition wall GB/T23449-2009 4 Compressive strength 5 Damaging load at bending 6 Surface denisty 7 Drying shrinkage value 8 Hanging force resistance 4 Partition-ing 9 Water content 1016 Light weight panels for partition walls used in buildings JG/T 169-2005 Hollow concrete panel contained solid wastes for partition wall GB/T23449-2009 Light weight concrete?panelsJG/T 350-2011 10 Cohesive strength Double skin metal faced insulating panels for building GB/T 23932-2009 11 Peel properties 12 Bending load 13 Soften coefficient Light weight concrete?panels JG/T 350-2011 14 Freeze-thaw resistance 15 Permeability resistance 16 connection capacity Ⅲ Mortar 1 Mortar 1 Consistency 1001 Standard for test method of basic properties of construction mortar JGJ/T 70-2009 Ready-mixed mortar GB/T25181-2010 2 Apparent density 3 Extent of leyer Standard for test method of basic properties of construction mortar JGJ/T 70-2009 4 Frost resistance Standard for test method of basic properties of construction mortar JGJ/T 70-2009 Ready-mixed mortar GB/T25181-2010 5 Consistency Loss in Plastic Time Technical specification for application of ready-mixed mortar SJG12-2010 1 Mortar 6 Setting time 1001 Standard for test method of basic properties of construction mortar JGJ/T 70-2009 Polymer modified cement mortars for waterproof JC/T984-2011 Ready-mixed mortar GB/T25181-2010 7 Compressive strength Standard for test method of basic properties of construction mortar JGJ/T 70-2009 Method of testing cements--Determination of strength GB/T17671-1999 Ready-mixed mortar GB/T25181-2010 Polymer modified cement mortar for waterproof JC/T 984-2011 1 Mortar 8 Bending strength 1001 Method of testing cements--Determination of strength GB/T17671-1999 Polymer modified cement mortar for waterproof JC/T 984-2011 1 Mortar 9 Dimendional change / Shrinkage ratio 1001 Standard for test method of basic properties of construction mortar JGJ/T 70-2009 Cementitious self-leveling floor mortar JC/T985-2005 Polymer modified cement mortar for waterproof JC/T 984-2011 Ready-mixed mortar GB/T25181-2010 10 Fluidity Test method for fluidity of cement mortar GB/T2419-2005 Cementitious self-leveling floor mortar JC/T985-2005 1 Mortar 11 Water retention property 1001 Standard for test method of basic properties of construction mortar JGJ/T 70-2009 Practice code for dry-mixed mortar DBJ/T15-36-200 4Technical specification for manufacture of ready-mixed mortar SJG11-2010 Practice code for ready-mixed mortar DBJ/T15-37-2004 Technical specification for application of ready-mixed mortar SJG 12-2010 Ready-mixed mortar JG/T230-2007 Ready-mixed mortar GB/T25181-2010 1 Mortar 12 Impermeability grade 1001 Practice code for dry-mixed mortar DBJ/T15-36-2004 Technical specification for manufacture of ready-mixed mortar SJG11-2010 Practice code for ready-mixed mortar DBJ/T15-37-2004 Technical specification for application of ready-mixed mortar SJG 12-2010 Polymer modified cement mortars for waterproof JC/T984-2011 Ready-mixed mortar GB/T25181-2010 1 Mortar 13 Tensile bond strength 1001 Practice code for dry-mixed mortar DBJ/T15-36-2004 Technical specification for manufacture of ready-mixed mortar SJG11-2010 Practice code for ready-mixed mortar DBJ/T15-37-2004 Cementitious self-leveling floor mortar JC/T985-2005 Polymer modified cement mortars for waterproof JC/T984-2011Special masonry mortar and plaster mortar for autoclaved aerated concrete JC890-2001 Interface treating agent for concrete JC/T907-2002 Ready-mixed mortar JG/T230-2007 Standard for test method of basic properties of construction mortar JGJ/T 70-2009 Ready-mixed mortar GB/T25181-2010 1 Mortar 14 Impact resistance 1001 Cementitious self-leveling floor mortar JC/T985-2005 15 Alkali resistance Polymer modified cement mortars for waterproof JC/T984-2011 16 Heat resistance 17 Thermal coefficient Special masonry mortar and plaster mortar for autoclaved aerated concrete JC890-2001 18 Open assembly time Interface treating agentfor concrete JC/T 907-2002 19 Shear bond strength 20 Mix proportion design of masonry mortar Specification for mix proportion design of masonry mortar JGJ 98-2010 21 Flexible property Polymer modified cement mortar for waterproof JC/T 984-2011 22 Water absorption 2 Grouts for ceramic wall and floor tiles 1 Abrasion resistance 1009 Grouts for ceramic walland floor tiles JC/T1004-2006 2 Grouts for ceramic wall and floor tiles 2 Drying shrinkage 1009 Grouts for ceramic walland floor tiles JC/T1004-2006 3 Bending strength 4 Bending strength after freezing and thawing 5 Compressive strength 6 Compressive strength after freezing and thawing 7 Water absorption 3 Concrete floor hardener 1 Bending strength 1002 Method of testing cements--Determination of strength GB/T17671-1999 accredited only for B method 2 Compressive strength 3 Wear resistance ratio Test method for abrasion resistance of concrete and its products (Ball bearing method) GB/T16925-1997 4 Surface strength Concrete floor hardener JC/T 906-2002 5 Appearance 3 Concrete floor hardener 6 Aggregate content deviation 1002 Concrete floor hardener JC/T 906-2002 Ⅳ Metallic material, Metal Products, weldments and jointer 1 Steel bars /Steels 1 Yield strength 0301 0201.01 Metallic materials - Tensile testing - Part 1 : Method of test at room temperature GB/T228.1-2010 2 Tensile strength 3 Percentage extension Metallic materials - Tensile testing - Part 1 : Method of test at room temperature GB/T228.1-2010 Steel for the reinforcement of concrete-Part 2:Hot rolled ribbed bars GB1499.2-2007 Steel for the reinforcement of concrete—Part 1:Hot rolled plain bars GB 1499.1-2008 4 bend Metallic materials--Bend test GB/T232-2010 1 Steel bars /Steels 5 weight deviation 0301 0201.01 Steel for the reinforcement of concrete-Part 2:Hot rolled ribbed bars GB1499.2-2007 Steel for the reinforcement of concrete—Part 1:Hot rolled plain barsGB 1499.1-2008 6 Shearing strength Pins and grooved pins-Shear test GB/T13683-1992 1 Steel bars /Steels 7 Rockwell hardness 0301 0201.01 Metallic materials - Rockwell hardness test - Part 1: Test method(scales A、B、C、D、E、F、G、H、K、N、T) GB/T 230.1-2009 1 Steel bars /Steels 8 Carbon content 0301 0201.01 Iron, steel and alloy - Determination of carbon contents - Gas-volumetric method after combustion in the pipe furnace GB/T223.69-2008 Steel and iron—Determination of total carbon and sulfur content Infrared absorption method after combustion in an induction furnace (routine method) GB/T 20123-2006 1 Steel bars /Steels 9 SulpHur content 0301 0201.01 Methods for chemical analysis of iron, steel and alloy. The potassium iodate titration method after combustion in the pipe furnace for the determination of sulfur content GB/T223.68-1997 Steel and iron—Determination of total carbon and sulfur content Infrared absorption method after combustion in an induction furnace (routine method) GB/T 20123-2006 10 Manganese content Methods for chemical analysis of iron, steel and alloy--The sodium(potassium)periodate pHotometric method for the determination of manganese content GB/T 223.63-1988 1 Steel bars /Steels 11 Silicon content 0301 0201.01 Steel and iron - Determination of acid-soluble silicon and total silicon content - Reduced molybdosilicate spectropHotometric methodGB/T223.5-2008 2 Cold rolled ribbed steel wires and bars 12 PHospHorus content 0301 0201.01 Iron,steel and alloy - Determination of pHospHorus content - Bismuth pHospHomolybdate blue spectropHotometric method and antimony pHospHomolybdate blue spectropHotometric method GB/T223.59-2008 2 Cold rolled ribbed steel wires and bars Part parameters. 0301 0201.01 Cold rolled ribbed steel wires and bars GB13788-2008 Accredited only for:Yield strength,Tensile strength,Percentage extension,bend,weight deviation ,Carbon content,SulpHur content,Manganese content,Silicon content,PHospHorus content 3 Steel for the reinforcement of Concrete :t rolled ribbed bars Part parameters. 0301 0201.01 Steel for the reinforcement of concrete-Part 2:Hot rolled ribbed bars GB1499.2-2007 Accredited only for:Yield strength,Tensile strength,Percentage extension,bend,weight deviation ,Carbon content,SulpHur content,Manganese content,Silicon content,PHospHorus content 4 Steel for the reinforcement of concrete: ot rolled plain bars Part parameters. 0301 0201.01 Steel for the reinforcement of concrete—Part 1:Hot rolled plain bars GB 1499.1-2008 Accredited only for:Yield strength,Tensile strength,Percentage extension,bend,weight deviation ,Carbon content,SulpHur content,Manganese content,Silicon content,PHospHorus content 5 Screw-thread steel barsfor the prestressing of concrete Part parameters. 0301 0201.01 Screw-thread steel barsfor the prestressing of concrete GB/T20065-2006 Accredited only for:Yield strength,Tensile strength,Percentage extension,bend,weight deviation ,Carbon content,SulpHur content,Manganese content,Silicon content,PHospHorus content 6 Cold-rolled and twisted bars Part parameters. 0301 0201.01 Cold-rolled and twisted bars JG190-2006 Accredited only for:Yield strength,Tensile strength,Percentage extension,bend,weight deviation ,Carbon content,SulpHur content,Manganese content,Silicon content,PHospHorus content 7 High strength low alloy structural steels Part parameters. 0301 0201.01 High strength low alloy structural steels GB/T1591-2008 Accredited only for:Yield strength,Tensile strength,Percentage extension,bend,Shearing strength,Rockwell hardness,Carbon content,SulpHur content,Manganese content,Silicon content,PHospHorus content 8 Continual hot-dip zinc-coated steel sheets and strips Part parameters. 0301 0201.01 Continual hot-dip zinc-coated steel sheets and strips GB/T 2518-2004 Accredited only for:Yield strength,Tensile strength,Percentage extension,bend,Shearing strength,Rockwell hardness,Carbon content,SulpHur content,Manganese content,Silicon content,PHospHorus content 9 Quality carbon structural steels Part parameters. 0301 0201.01 Quality carbon structural steels GB/T699-1999 Accredited only for:Yield strength,Tensile strength,Percentage extension,bend,Shearing strength,Rockwell hardness,Carbon content,SulpHur content,Manganese content,Silicon content,PHospHorus content 10 Carbon structural steels Part parameters. 0301 0201.01 Carbon structural steels GB/T700-2006 Accredited only for:Yield strength,Tensile strength,Percentage extension,bend,Shearing strength,Rockwell hardness,Carbon content,SulpHur content,Manganese content,Silicon content,PHospHorus content 11 Prepainted steel sheet Part parameters. 0301 0201.01 Prepainted steel sheet GB/T 12754-2006 Accredited only for:Yield strength,Tensile strength,Percentage extension,bend,Shearing strength,Rockwell hardness,Carbon content,SulpHur content,Manganese content,Silicon content,PHospHorus content 12 Steel wires for the prestressing of concrete Part parameters. 0301 0201.01 Steel wires for the prestressing of concrete GB/T 5223-2002 Accredited only for:Yield strength,Tensile strength,Percentage extension 13 Low carbon steel wire for general uses Part parameters. 0301 Low carbon steel wire for general uses YB/T 5294-2009 Accredited only for:Yield strength,Tensile strength,Percentage extension 14 Zinc coat of steel products 1 Zn-coat quality (thickness) 0301 Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products GB/T 1839-2008 Metallic coatings--Hot dip galvanized coatings on fabricated iron and steel articles--Specifications and test methods GB/T13912-2002 15 Metal weldments 1 Tensile strength 0303 Tensile test method on welded joints GB/T2651-2008 2 Bend Bend test methods on welded joints GB/T2653-2008 16 Welding steel bars 1 Tensile strength 0303 Standard for Test Methods of Welded Joint of Steel Bars JGJ/T 27-2001 Technical specification for concrete structures reinforced with welded steel fabric JGJ 114-2003 Steel for the reinforcement of concrete - Part 3 : Welded fabric GB/T1499.3-2010 Specification for welding and acceptance of reinforcing steel bars JGJ 18-2012 16 Welding steel bars 2 Bending 0303 Standard for Test Methods of Welded Joint of Steel BarsJ GJ/T 27-2001 Technical specification for concrete structures reinforced with welded steel fabric JGJ 114-2003 Specification for welding and acceptance of reinforcing steel bars JGJ 18-2012 Metallic materials--Bend test GB/T232-2010 3 Anti-shear force Steel for the reinforcement of concrete - Part 3 : Welded fabric GB/T1499.3-2010 17 Mechanical splicing of bars 1 Tensile strength 0323 Technical specification for mechanical splicing of steel reinforcing bars JGJ 107-2010 Rolled parallel thread splicing of rebars JG 163-2004 Parallel thread rebar splice with upsetting end JG 171-2005 2 Residual deformation Technical specification for mechanical splicing of steel reinforcing bars JGJ 107-2010 18 Steel wires,Anchorage, grip 1 Tensile strength 0301 Steel strand for prestressed concrete GB/T5224-2003(2008) 2 Min breaking load 3 Nonproportionl extension load 4 Elongation percentage 5 Elastic modulus 18 Steel wires,Anchorage, grip 6 Rockwell hardness 0301 Anchorage,grip and coupler for prestressing tendons GB/T 14370-2007 Metallic materials - Rockwell hardness test - Part 1: Test method(scales A、B、C、D、E、F、G、H、K、N、T) GB/T 230.1-2009 19 Corrugated metal ducts for pre-stressed concrete 1 Appearance 0301 Corrugated metal ducts for prestressed concrete JG 225-2007 2 Dimention 3 Stiffness of neck direction on concentrated load 4 Stiffness of neck direction on even load 5 Leaking resist-ance after loading 6 Bending leakage resistance 20 Steel tube scaffold couplers 1 Tensile resistance 0301 Steel tube scaffold couplers GB15831-2006 2 Anti compressive 3 Sliding resistance 4 Anti-destroy 21 Steel cable tray 1 Loading test for steel cable tray 0301 Code for design of steel cable tray engineering CECS 31:2006 22 Steel furrings for buildings 1 Appearance 0301 Steel furrings for buildingsGB/T 11981-2008 2 Dimension 3 Static loading test 4 Rust prevention Ⅴ Precast concrete unit 1 Precast prestressed concrete floors 1 Load 1017 Code for acceptance of constructional quality of concrete structures GB50204-2002(2011) 2 Bending deflection 3 Crack breadth 2 Concrete and reinforced concrete sewer pipes 1 Appearance 0339 Test methods of concrete and reinforced concrete drainage and sewer pipes GB/T 16752-2006 2 Dimension 3 Inner water pressure 4 External load 5 Thickness of concrete cover 3 Concrete pipes for water transmission 1 Appearance 0339 Test methods of concrete pipes for water transmission GB/T 15345-2003 2 Dimension 3 Hydraulic Test 4 Thickness of concrete cover 4 Hollow floor inner structure of in-situ concrete 1 Compressive strength 1017 Technical specification for cast-in-situ concrete hollow floor structure CECS 175-2004 Ⅵ Decorating and refurbishing materials 1 Decorating materials 1 State in container 0215 Synthetic resin emulsion coatings for exterior wall GB/T9755-2001 Synthetic resin emulsion coatings for interior wall GB/T9756-2009 Solvent-thinned coatings for exterior wall GB/T9757-2001 Inorganic building coating for external wall JG/T26-2002 Multi-layer coatings for architecture GB9779-2005 Sand textured building coating based on synthetic resin emulsion JG/T24-2000 Primer for interior and exterior wall JG/T210-2007 Elastomeric wall coatings JG/T172-2005 Crosslinking fluorocarbon resin coatings HG/T3792-2005 1 Decorating materials 2 Workability/brushability 0215 Synthetic resin emulsion coatings for exterior wall GB/T9755-2001 Synthetic resin emulsion coatings for interior wall GB/T9756-2009 Solvent-thinned coatings for exterior wall GB/T9757-2001 Inorganic building coating for external wall JG/T26-2002 Sand textured building coating based on synthetic resin emulsion JG/T24-2000 Primer for interior and exterior wall JG/T210-2007 Elastomeric wall coatings JG/T172-2005 1 Decorating materials 3 Paint film appearance 0215 Synthetic resin emulsion coatings for exterior wall GB/T9755-2001 Synthetic resin emulsion coatings for interior wall GB/T9756-2009 Solvent-thinned coatings for exterior wall GB/T9757-2001 Inorganic building coating for external wall JG/T26-2002 Multi-layer coatings for architecture GB9779-200 5Environmental friendly silicon-acrylic emulsion multi-layer coatings for external thermal insulation JG/T206-2007 Primer for interior and exterior wall JG/T210-2007 Elastomeric wall coatings JG/T172-2005 Crosslinking fluorocarbon resin coatings HG/T3792-2005 1 Decorating materials 4 Stability at low temperature 0215 Synthetic resin emulsion coatings for exterior wall GB/T9755-2001S ynthetic resin emulsion coatings for interior wall GB/T9756-2009 Inorganic building coating for external wall JG/T26-2002 Multi-layer coatings for architecture GB9779-2005 Sand textured building coating based on synthetic resin emulsion JG/T24-2000 Primer for interior and exterior wall JG/T210-2007 Elastomeric wall coatings JG/T172-2005 1 Decorating materials 5 Contrastion rate 0215 Synthetic resin emulsion coatings for exterior wall GB/T9755-2001 Synthetic resin emulsion coatings for interior wall GB/T9756-2009 Solvent-thinned coatings for exterior wall GB/T9757-2001 Inorganic building coating for external wall JG/T26-2002 Elastomeric wall coatings JG/T172-2005 1 Decorating materials 6 Stain resistance 0215 Synthetic resin emulsion coatings for exterior wall GB/T9755-2001 Solvent-thinned coatings for exterior wall GB/T9757-2001 Inorganic building coating for external wall JG/T26-2002 Multi-layer coatings for architecture GB9779-2005 Environmental friendly silicon-acrylic emulsion multi-layer coatings for external thermal insulation JG/T206-2007 Elastomeric wall coatings JG/T172-2005 Crosslinking fluorocarbon resin coatings HG/T3792-2005 Sand textured building coating based on synthetic resin emulsion JG/T 24-2000 1 Decorating materials 7 Drying time 0215 Methods of test for drying time of coatings of paints and putties GB/T1728-1979(1989) 8 Water resistance Determination of resistance to water of films GB/T1733-1993 Crosslinking fluorocarbon resin coatings HG/T3792-2005 1 Decorating materials 9 Alkali resistance 0215 Determination for alkali resistance of film of architectural paints and coatings GB9265-2009 Floor coating HG/T 3829-2006 10 Scrab resistance Determination of scrub resistance of film of architectural paints and coatingsGB 9266-2009 11 Temperature change resistance / freeze-thaw resistance Determination for freeze-thaw resistance of film of building coatings JG/T25-1999 1 Decorating materials 12 Cracking and dryness at initial stages 0215 Sand textured building coating based on synthetic resin emulsion JG/T24-2000 Multi-layer coatings for architecture GB9779-2005 13 Cohesive strength(standard state, after soaking, after freezing and thawing) 14 Impact resistance Determination of impact resistance of film GB/T1732-1993 Multi-layer coatings for architecture GB/T 9779-2005 15 Solid content/involatile content Paints,varnishes and plastics-Determination of non-volatile-matter content GB/T 1725-2007 16 Flexibility Determination of flexibility of films GB/T1731-1993 1 Decorating materials 17 Adhesion force 0215 Method of test for adhesion of paint filmsGB1720-1979Paints and varnishes-Cross cut test for filmsGB/T9286-1998 18 Salt water resistance Methods of test for chemical resistance of paint films GB/T 1763-1979 Floor coating HG/T 3829-2006 19 Capacity of coverage for coating Methods of test for hiding power of pain ts GB1726-1979 20 Water permeability Multi-layer coatings for architecture GB9779-2005 21 Abrasion resistance Floor coating HG/T 3829-2006 22 Acid resistance 2 Fire resistive coating 1 State in container 1508 Fire resistive coating for steel structure GB 14907-2002 Finishing fire retardant paint GB 12441-2005 2 Drying time 2 Fire resistive coating 3 Cracking and dryness at initial stages 1508 Fire resistive coating for steel structure GB 14907-2002 4 Cohesive strength 5 Water resistance 6 Fineness Finishing fire retardant paint GB 12441-2005 7 Adhesion 8 Flexibility 9 Impact resistance 10 Salt spray resistance 11 Compressive strength Fire resistive coating for steel structure GB 14907-2002 12 Dry density 13 Surface cold and heat cycling durability 3 Putty 1 State in container 0215 Putty for interior JG/T298-2010 Waterproofing flexible putty for exterior thermal insulation systems JG/T 229-2007 Putty for exterior wall JG/T 157-2009 3 Putty 2 Workability/brushability 0215 Putty for exterior wa llJG/T 157-2009 Putty for interior JG/T298-2010 Waterproofing flexible putty for exterior thermal insulation systems JG/T 229-2007 3 Drying time Methods of test for drying time of coatings of paints and putties GB/T1728-1979(1989) 4 Water resistance Determination of resistance to water of films GB/T1733-1993 5 Alkali resistance Determination for alkali resistance of film of architectural paints and coatings GB9265-2009 3 Putty 6 Cohesive strength(standard state, after soaking, after freezing and thawing) 0215 Waterproofing flexible putty for exterior thermal insulation systems JG/T 229-2007 Putty for exterior wallJ G/T 157-2009 Putty for interior JG/T 298-2010 7 Abrasion resistance Putty for interior JG/T298-2010 Putty for exterior wall JG/T 157-2009 Waterproofing flexible putty for exterior thermal insulation systems JG/T 229-2007 8 Stability at low temperature Putty for interior JG/T298-2010 Putty for exterior wall JG/T 157-2009 9 Dynamic cracking resistance Putty for exterior wallJG/T 157-2009 3 Putty 10 Water absorption 0215 Putty for exterior wall JG/T 157-200 9Waterproofing flexible putty for exterior thermal insulation systems JG/T 229-2007 11 Plaster membrane flexibility Putty for exterior wall JG/T 157-2009 12 Flexibility Putty for interior JG/T 298-2010 4 Ceramic tiles 1 Dimension 0390 Test methods of ceramic tiles-Part 2:Determination of dimensions and surface quality GB/T 3810.2-2006 2 Appearance 3 Flatness 4 Water absorption Test methods of ceramic tiles-Part 3:Determination of water absorption,apparent porosity,apparent relative density and bulk density GB/T 3810.3-2006 4 Ceramic tiles 5 Heat shock resistance 0390 Test methods of ceramic tiles-Part 9:Determination of resistance to thermal shock GB/T 3810.9-2006 Ceramic mosaicJ C 456-2005 6 Moisture expansion Test methods of ceramic tiles—Part 10:Determination of moisture expansion GB/T 3810.10-2006 7 Chemical corrosion resistance Test methods of ceramic tiles-Part 13:Determination of chemical resistance GB/T 3810.13-2006 8 Rupture modulusand breaking strength Test methods of ceramic tiles-Part 4:Determination of modulus of rupture and breaking strength GB/T 3810.4-2006 9 Frost resistance Test methods of ceramic tiles—Part 12:Determination of frost resistance GB/T 3810.12-2006 4 Ceramic tiles 10 Wear-resistent deepth of unglazed brick 0390 Test methods of ceramic tiles—Part 6:Determination of resistance to deep abrasion for unglazed tiles GB/T 3810.6-2006 11 Connection quality Ceramic mosaic JC 456-2005 12 Thermal stability Glass mosaic GB/T 7697-1996 13 Chemical stability 14 Gloss index Test methods of specular gloss for decorative building materials GB/T 13891-2008 5 Natural facing stones 1 Appearance 0309 Specification for natural granite for building slab GB/T 18601-2009 Building batten made with natural marble GB/T 19766-2005 Dry-hanging nature facing huilding granite slab and fixing stainless steel systems--Part1:Dry-hanging nature facing building granite slab JC 830.1-2005 Natural sandstone for building slab GB/T 23452-2009 Natural limestone for building slab GB/T 23453-2009 2 Dimension 3 Angle 4 Flatness 5 Volume density Test methods for natural facing stones Part 3: Test methods for bulk density,true density,true porosity and water absorption GB/T9966.3-2001 6 Water absorption 5 Natural facing stones 7 Dry,wet and after freezing compressive strength 0309 Test methods for natural facing stones Part 1: Dry,wet and after freezing test methods for compressive strength GB/T9966.1-2001 8 Dry, wet flexural strength Test methods for natural facing stones Part 2: Dry and wet test methods for flexural strength GB/T9966.2-2001 9 Mirror luster Test methods of specular gloss for decorative building materials GB/T13891-2008 6 Man-made stone for decoration 1 Dimension 0309 Method for the inspectin of man-made stone for export SN/T 0308-1993 2 Density 3 Water absorption 4 Bending strength 5 Compressive strength 7 Concrete tiles 1 Dimension 1003 Concrete tiles JC/T 746-2007 2 Appearance 7 Concrete tiles 3 Water absorption 1003 Concrete tiles JC/T 746-2007 4 Load 5 Water impermeability 6 Frost resistance 8 Decoration panels 1 Appearance 0309 Decorating gypsum board JC/T 799-2007 Gypsum plasterboard GB /T 9775-2008 Mineral wool decorating and acoustic ecilings JC670-2005 Aluminium-plastic composite panel GB/T17748-2008 Glass fiber & magnesium cement board JC 688-2006 Fiber cement flat sheets Part 1:Non-Asbestos Fiber cement flat sheets JC/T 412.1-2006 Fiber cement flat sheets Part 2:Asbestos Fiber cement flat sheets JC/T 412.2-2006 Fiber reinforced calcium silicate boards Part 1:Non-Asbestos calcium silicate boards JC/T 564.1-2008 Fiber reinforced calcium silicate boards Part 2:Asbestos calcium silicate boards JC/T 564.2-2008 8 Decoration panels 2 Dimension 0309 Decorating gypsum board JC/T 799-2007 Gypsum plasterboard GB /T 9775-2008 Mineral wool decorating and acoustic ecilings JC670-2005 Aluminium-plastic composite panel GB/T17748-2008 Glass fiber & magnesium cement board JC 688-2006 Fiber cement flat sheets Part 1:Non-Asbestos Fiber cement flat sheets JC/T 412.1-2006 Fiber cement flat sheets Part 2:Asbestos Fiber cement flat sheets JC/T 412.2-2006 Fiber reinforced calcium silicate boards Part 1:Non-Asbestos calcium silicate boards JC/T 564.1-2008 Fiber reinforced calcium silicate boards Part 2:Asbestos calcium silicate boards JC/T 564.2-2008 8 Decoration panels 2 Dimension 0309 Aluminium panels for building decoration GB/T 23443-2009 3 loading/ Bending strength Gypsum plasterboard GB /T 9775-2008Decorating gypsum board JC/T 799-2007 Mineral wool decorating and acoustic ecilings JC670-2005 Test methods for fiber cement products GB/T 7019-1997 Mineral wool decorating and acoustic ceilings GB/T 25998-2010 8 Decoration panels 4 Deviation of diagonal length 0309 Gypsum plasterboard GB /T 9775-2008 5 Deviation of flatness Decorating gypsum board JC/T 799-2007 6 Thickness of coating Non-conductive coatings on non-magnetic basis metals—Measurement of coating thickness—Eddy current GB/T4957-2003 7 Surface density Decorating gypsum board JC/T 799-2007 Predecorated gypsum board JC/T997-2006 8 Water content Decorating gypsum board JC/T 799-2007 Mineral wool decorating and acoustic ecilingsJ C670-2005 Test methods for fiber cement products GB/T 7019-1997 Mineral wool decorating and acoustic ceilings GB/T 25998-2010 8 Decoration panels 9 Water absorption 0309 Gypsum plasterboard GB /T 9775-2008 Decorating gypsum board JC/T 799-2007 Test methods for fiber cement products GB/T 7019-1997 10 Water impermeability Test methods for fiber cement products GB/T 7019-1997 11 Volume density 12 Moisture expansion ratio 13 Drying shrinkage ratio 14 Frost resistance 8 Decoration panels 15 Gloss deviation 0309 Paints and varnishes-Determination of specular gloss of non-metallic paint films at 20°、60°and 85°GB/T9754-2007 Test methods of specular gloss for decorative building materials GB/T13891-2008 16 Bending strength Test methods for fiber cement products GB/T 7019-1997 Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels GB/T17657-1999 Aluminium-plastic composite panel GB/T17748-2008 Aluminium-plastic composite panel for ordinary decoration GB/T 22412-2008 8 Decoration panels 17 Elastic module in bending 0309 Aluminium-plastic composite panel for curtain wall GB/T 17748-2008 18 Planar density Gypsum plasterboard GB /T 9775-2008 8 Decoration panels 19 Shearing strength 0309 Aluminium-plastic composite panel GB/T17748-2008 20 Transfixion resistance 21 Flexibility of coating Aluminium-plastic composite panel for curtain wall GB/T 17748-2008 Aluminium-plastic composite panel for ordinary decoration GB/T22412-2008 22 Boiling water resistance 8 Decoration panels 23 Alkali resistance 0309 Aluminium-plastic composite panel for curtain wall GB/T 17748-2008 Aluminium-plastic composite panel for ordinary decoration GB/T22412-2008 Metal and metal-composite ceilings GB/T 23444-2009 Metal and metal-composite ceilings JC/T 1059-2007 24 Oil resistance 8 Decoration panels 25 Acid resistance 0309 Aluminium-plastic composite panel for curtain wall GB/T 17748-2008 Aluminium-plastic composite panel for ordinary decoration GB/T22412-2008 Aluminium panels for building decoration GB/T23443-2009 Metal and metal-composite ceilings GB/T 23444-2009 Metal and metal-composite ceilings JC/T 1059-2007 26 Moisture deflection Decorating gypsum board JC/T 799-2007 Mineral wool decorating and acoustic ecilings JC/T670-2005 27 Pencil rigidity Paints and varnishes—Determination of film hardness by pencil test GB/T6739-2006 28 Hardness of paint film 8 Decoration panels 29 Adhesion of coating 0309 Method of test for adhesion of paint films GB1720-1979 Paints and varnishes-Cross cut test for films GB/T9286-1998 30 Impact resistance Determination of impact resistance of film GB/T1732-1993 31 Stain resistance Test method for dirt pickup resistance of film of architectural coatings and paints GB/T9780-2005 32 Thermal deformation temperature Plastics-Determination of temperature of deflection under load-Part 1:General test method GB/T1634.1-2004 33 Peel strength/Peel force Adhesives, 180°peel strength test method for a flexible-bonded-to-rigid test specimen assembly GB/T2790-1995 Aluminium-plastic composite panel GB/T17748-2008 8 Decoration panels 34 Dehylogenation resistance 0309 Glass fiber & magnesium cement board JC 688-2006 35 Solvent resistance Aluminium-plastic composite panel for curtain wall GB/T 17748-2008 Aluminium-plastic composite panel for ordinary decoration GB/T22412-2008 Aluminium panels for building decoration GB/T 23443-2009 36 The adhesion between retaining tissues and core Gypsum plasterboard GB/T 9775-2008 37 Thermal gradient resistance Aluminium-plastic composite panel for ordinary decoration GB/T 22412-2008 Aluminium-plastic composite panel for curtain wall GB/T 17748-2008 9 Glass-ceramics for building decoration 1 Appearance 0310 Glass-ceramics forbuilding decoration JC/T 872-2000 2 Dimension 9 Glass-ceramics for building decoration 3 Deviation of flatness 0310 Glass-ceramics forbuilding decoration JC/T 872-2000 4 Deviation of angle 5 Bending strength 6 Acid resistance 7 Alkali resistance 8 Resistance to quick cooling and heating 9 Gloss deviation Test methods of specular gloss for decorative building materials GB/T13891-2008 10 Paint 1 State in container 0215 Zinc Rich Primer HG/T 3668-2009 Red-Lead Alkyd Anticorrosive Paint HG/T 3346-1999 Paints for steel structure bridge HG/T 3656-1999 Crosslinking fluorocarbon resin coatings HG/T3792-2005 Floor coating HG/T3829-2006 Anticorrosive coatings for buildings steel structure JG/T224-2007 10 Paint 2 Paint film appearance 0215 Zinc Rich Primer HG/T 3668-2009 Varous colour pHenolic anticorrosive paint HG/T 3345-1999 Red-Lead Alkyd Anticorrosive Paint HG/T 3346-1999 Paints for steel structure bridge HG/T 3656-1999 Crosslinking fluorocarbon resin coatings HG/T3792-2005 Anticorrosive coatings for buildings steel structure JG/T224-2007 3 Fineness 10 Paint 4 Bending resistance/ Flexibility 0215 Determination of flexibility of films GB/T1731-1993 Paints for steel structure bridge HG/T 3656-1999 Red-Lead Alkyd Anticorrosive Paint HG/T 3346-1999 Anticorrosive coatings for buildings steel structure JG/T224-2007 5 Impact resistance Paints for steel structure bridge HG/T 3656-1999 Zinc Rich Primer HG/T 3668-2009 Varous colour pHenolic anticorrosive paint HG/T 3345-1999 Crosslinking fluorocarbon resin coatings HG/T3792-2005 Floor coating HG/T3829-2006 Anticorrosive coatings for buildings steel structure JG/T224-2007 10 Paint 6 Drying time 0215 Paints for steel structure bridge HG/T 3656-1999 Zinc Rich Primer HG/T 3668-2000 Varous colour pHenolic anticorrosive paint HG/T 3345-1999 Red-Lead Alkyd Anticorrosive Paint HG/T 3346-1999 Crosslinking fluorocarbon resin coatings HG/T3792-2005 Floor coating HG/T3829-2006 Anticorrosive coatings for buildings steel structure JG/T224-2007 10 Paint 7 Water resistance 0215 Paints for steel structure bridge HG/T 3656-1999 Crosslinking fluorocarbon resin coatings HG/T3792-2005 Floor coating HG/T3829-2006 Anticorrosive coatings for buildings steel structure JG/T224-2007 8 Adhesion of coating Method of test for adhesion of paint films GB/T 1720-197 Paints for steel structure bridge HG/T 3656-1999 Crosslinking fluorocarbon resin coatings HG/T3792-2005 Floor coating HG/T3829-2006 Anticorrosive coatings for buildings steel structure JG/T224-2007 10 Paint 9 Salt water resistance 0215 Paints for steel structure bridge HG/T 3656-1999Varous colour pHenolic anticorrosive paintHG/T 3345-1999Red-Lead Alkyd Anticorrosive Paint HG/T 3346-1999Floor coatingHG/T3829-2006Anticorrosive coatings for buildings steel structureJG/T224-2007 10 Workability/brushability Paints for steel structure bridge HG/T 3656-1999 Zinc Rich Primer HG/T 3668-2009 Red-Lead Alkyd Anticorrosive Paint HG/T 3346-1999 Anticorrosive coatings for buildings steel structure JG/T224-2007 10 Paint 11 Solid content/involatile content Red-Lead Alkyd Anticorrosive Paint HG/T 3346-1999 Crosslinking fluorocarbon resin coatings HG/T3792-2005 Floor coating HG/T3829-2006 11 Harmful substance 1 Formaldehyde 0215 Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels GB/T17657-1999 Indoor decorating and refurbishing materials--Limit of formal dehyde emission of wood based panels and finishing products GB 18580-2001 Indoor decorating and refurbishing materials-Limit of harmful substances of interior architectural coatings GB18582-2008 Indoor decorating andrefurbishing materials-Limit of harmful substances of adhesives GB18583-2008 Indoor decorating and refurbishingmaterials--Limit of harmful substances of wood based furniture GB18584-2001 Indoor decorating and refurbishing materials--Limit of harmful substances of wallpapers GB18585-2001 11 Harmful substance 1 Formaldehyde 0215 Indoor decorating and refurbishing materials--Limitations of harmful substances emitted from carpets,carpet cushions and adhesives GB18587-2001 Code for indoor environmental pollution control of civil building engineering GB50325-2010 Determination of formaldehyde content of waterborne coatings - SpectropHtometric method with acetylacetone GB/T 23993-2009 Limit of harmful substances of building waterproof coatings JC 1066-2008 Limit of harmful substances of exterior wall coatings GB 24408-2009 Indoor decorating and refurbishing materials - Limit of harmful substances of water based woodenware coatings GB 24410-2009 11 Harmful substance 2 Volatile organic compounds 0215 Indoor decorating and refurbishing materials--Limit of harmful substances of solvent coatings for woodenware GB18581-2009 Indoor decorating and refurbishing materials-Limit of harmful substances of interior architectural coatings GB18582-2008 11 Harmful substance 2 Volatile organic compounds 0215 Indoor decorating and refurbishing materials--Limit of harmful substances of polyvinyl chloride floor coverings GB18586-2001 Limit of harmful substances of exterior wall coatings GB 24408-2009 Indoor decorating and refurbishing materials - Limit of harmful substances of water based woodenware coatings GB 24410-2009 Code for indoor environmental pollution control of civil building engineering GB50325-2010 Limit of harmful substances of building waterproof coatings JC 1066-2008 11 Harmful substance 3 Total volatile organic compounds 0215 Indoor decorating and refurbishing materials-Limit of harmful substances of adhesives GB18583-2008 Indoor decorating and refurbishing materials--Limitations of harmful substances emitted from carpets,carpet cushions and adhesives GB18587-2001 Code for indoor environmental pollution control of civil building engineering GB50325-2010 11 Harmful substance 4 Benzene 215 Indoor decorating and refurbishing materials--Limit of harmful substances of solvent coatings for woodenware GB18581-2009 Indoor decorating and refurbishing materials-Limit of harmful substances of adhesives GB18583-2008 Limit of harmful substances of exterior wall coatings GB 24408-2009 Limit of harmful substances of building waterproof coatings JC 1066-2008 Code for indoor environmental pollution control of civil building engineering GB50325-2010 11 Harmful substance 5 Total of toluene and xylene 215 Indoor decorating and refurbishing materials--Limit of harmful substances of solvent coatings for woodenware GB18581-2009 Limit of harmful substances of building waterproof coatings JC 1066-2008 Limit of harmful substances of exterior wall coatings GB 24408-2009 Code for indoor environmental pollution control of civil building engineering GB50325-2010 11 Harmful substance 6 Total amount of benzene, toluene, ethyl benzene, and xylene 0215 Indoor decorating and refurbishing materials-Limit of harmful substances of interior architectural coatings GB18582-2008 Indoor decorating and refurbishing materials - Limit of harmful substances of water based woodenware coatings GB 24410-2009 Limit of harmful substances of building waterproof coatings JC 1066-2008 7 Total of toluene and xylene Indoor decorating and refurbishing materials-Limit of harmful substances of adhesives GB18583-2008 Code for indoor environmental pollution control of civil building engineering GB50325-2010 11 Harmful substance 8 TDI((tolylene diisocyanate) 0215 Binders for paints and varnishes - Determination of monomeric diisocyanates in isocyanate resins GB18446-2009 Indoor decorating and refurbishing materials-Limit of harmful substances of adhesives GB18583-2008 9 Chloroethylene Indoor decorating and refurbishing materials--Limit of harmful substances of polyvinyl chloride floor coverings GB18586-2001 10 Styrene Indoor decorating and refurbishing materials—Limitations of harmful substances emitted from carpets,carpet cushions and adhesives GB18587-2001 11 4-PHenylcyclo- hexene 11 Harmful substance 12 BHT-butylated hydroxytoluene 0215 Indoor decorating and refurbishing materials—Limitations of harmful substances emitted from carpets,carpet cushions and adhesives GB18587-2001 13 2-ethyl-1-hexanol 11 Harmful substance 14 Internal exposure index 0215 Limit of radionuclides in building materials GB6566-2010 15 External exposure index 16 Ammonia Limit of ammonia emitted from the concrete admixtures GB18588-2001 11 Harmful substance 17 Soluble lead 0215 Indoor decorating and refurbishing materials - Limit of harmful substances of solvent based coatings for woodenware GB 18581-2009 Indoor decorating and refurbishing materials-Limit of harmful substances of interior architectural coatings GB 18582-2008 18 Soluble Chromium 19 Soluble Cadmium 20 Soluble Mercury 12 Harmful substances ofsoil 1 Soil Radon 222Rn 0238 Code for indoor environmental pollution control of civil building engineering GB50325-2010 2 Radon 222Rn exhalation rate from surface 12 Harmful substances ofsoil 3 total chromium 0238 The technical specification for soil environmental monitoring HJ/T 166-2004 4 Copper 5 zinc 6 Nickel 7 Arsenic Soil quality--Determination of total arsenic--Spectrophotometric method with potassium borohyride and silver nitrate GB/T 17135-1997 The technical specification for soil environmental monitoring HJ/T 166-2004 13 Anti-static raised floor 1 Size 0309 General specification for raised access floors for electrostatic protection SJ/T 10796-2001 2 Appearance 3 electrolytic Activities of the raised floor 13 Anti-static raised floor 4 Loading test 0309 General specification for raised access floors for electrostatic protection SJ/T 10796-2001 Accredited only for:Concentrated load and Ultimate concentrated load 5 The impact resistance 6 The support of the permit use of load Ⅶ Waterproof material 1 Waterproof sheet 1 Tensile strength/pull force 1007 Test methods for building sheets for waterproofing—Part 8:Bitumen sheets for waterproofing-tensile properties GB/T328.8-2007 Rubber, vulcanized or thermoplastic--Determination of tensile stress-strain properties GB/T528-2009 Styrene butadiene styrene(SBS) modified bituminous sheet materials GB18242-2008 Atactic polypropylene (APP)modified bituminous sheet materials GB 18243-2008 Polyvinyl chloride plastic sheets for waterproofing GB12952-2011 Chlorinated polyethylene plastic sheets for waterproofing GB 12953-2003 Test methods for building sheets for waterproofing—Part 9:Plastic and rubber sheets for waterproofing-tensile properties GB/T328.9-2007 1 Waterproof sheet 2 Elongation/Elongation at break 1007 Test methods for building sheets for waterproofing—Part 8:Bitumen sheets for waterproofing-tensile properties GB/T328.8-2007 Rubber, vulcanized or thermoplastic--Determination of tensile stress-strain properties GB/T528-2009 Styrene butadiene styrene(SBS) modified bituminous sheet materials GB18242-2008 Atactic polypropylene (APP)modified bituminous sheet materials GB 18243-2008 Polyvinyl chloride plastic sheets for waterproofing GB12952-2011 Chlorinated polyethylene plastic sheets for waterproofing GB 12953-2003 1 Waterproof sheet 2 Elongation/Elongation at break 1007 Test methods for building sheets for waterproofing—Part 9:Plastic and rubber sheets for waterproofing-tensile properties GB/T 328.9-200 1 Waterproof sheet 3 Flexibility/flexibility atlow temperature 1007 Test methods for building sheets for waterproofing—Part 14:Bitumen sheets for waterproofing-flexibility at low temperature GB/T328.14-2007 Polyvinyl chloride plastic sheets for waterproofing GB12952-2011 Chlorinated polyethylene plastic sheets for waterproofing GB 12953-2003 Self-adhering polymer modified bituminous waterproof sheet GB 23441-2009 Styrene butadiene styrene(SBS) modified bituminous sheet materials GB18242-2008 1 Waterproof sheet 4 Water impermeability 1007 Test methods for building sheets for waterproofing—Part 10:Bitumen,plastic and rubber sheets for water-proofing-watertightness GB/T328.10-2007 Polymer water-proof materials—Part 1:Water-proof sheet GB 18173.1-2012 5 Heat resistance Test methods for building sheets for waterproofing—Part 11:Bitumen sheets for waterproofing-flow resist-ance at elevated temperature GB/T328.11-2007 1 Waterproof sheet 6 Tear strength 1007 Test methods for building sheets for waterproofing—Part 18:Bitumen sheets for waterproofing-resistnace to tearing(nail shank) GB/T328.18-2007Rubber,vulcanized or thermoplastic--Determination of tensile stress-strain properties GB/T528-2009 Rubber, vulcanized or thermoplastic--Determination of tear strength (Trouser, angle and crescent test pieces) GB/T529-2008 1 Waterproof sheet 7 Dimensional stability / Change in dimensions on heating 1007 Test methods for building sheets for waterproofing—Part 12:Bitumen sheets for waterproofing-dimensional stability GB/T328.12-2007 Polyvinyl chloride plastic sheets for waterproofing GB12952-2011 Chlorinated polyethylene plastic sheets for waterproofing GB 12953-2003 Polymer water-proof materials—Part 1:Water-proof sheet GB 18173.1-2012 8 Accelerated weathering ageing Test methods for resistance to weathering of building water proofing materials GB/T18244-2000 1 Waterproof sheet 9 Peel strength 1007 Test methods for building sheets for waterproofing—Part 20:Bitumen sheets for waterproofing-resistance to peeling of joints GB/T328.20-2007 Self-adhering polymer modified bituminous waterproof sheet GB 23441-2009 Rubber,vulcanized or thermoplastic--Determination of adhesion to textile fabric GB/T532-2008 Polymer water-proof materials—Part 1:Water-proof sheet GB 18173.1-2012 10 Impact resistance Polyvinyl chloride plastic sheets for waterproofing GB12952-2011 Chlorinated polyethylene plastic sheets for waterproofing GB 12953-2003 1 Waterproof sheet 11 Shear property 1007 Test methods for building sheets for waterproofing—Part 22:Bitumen sheets for waterproofing-resistance to shearing of joints GB/T328.22-2007 12 Adhesive property on shear force Polymer water-proof materials—Part 1:Water-proof sheet GB 18173.1-2012 13 Thickness of pitchy Modified bituminous waterproofing sheets for concrete bridge decks and other concrete surfaces trafficable by vehicles JC/T974-2005 Styrene butadiene styrene(SBS) modified bituminous sheet materials GB18242-2008 Atactic polypropylene (APP)modified bituminous sheet materials GB 18243-2008 1 Waterproof sheet 14 Soluble matter content 1007 Test methods for building sheets for waterproofing—Part 26:Bitumen sheets for waterproofing-dissouble composite of membrane(impregnated and coated aspHalt amount) GB/T328.26-2007 Modified bituminous waterproofing sheets for concrete bridge decks and other concrete surfaces trafficable by vehicles JC/T974-2005 15 Alkali resistance Modified bituminous waterproofing sheets for concrete bridge decks and other concrete surfaces trafficable by vehicles JC/T974-2005 1 Waterproof sheet 16 Heat aging 1007 Modified bituminous waterproofing sheets for concrete bridge decks and other concrete surfaces trafficable by vehicles JC/T974-2005 Styrene butadiene styrene(SBS) modified bituminous sheet materials GB18242-2008 Atactic polypropylene (APP)modified bituminous sheet materials GB 18243-2008 17 nail water tightness Self-adhering polymer modified bituminous waterproof sheet GB 23441-2009 18 Filter oil filter capability Self-adhering polymer modified bituminous waterproof sheet GB 23441-2009 Pre-applied and wet installed waterproof sheets GB/T 23457-2009 1 Waterproof sheet 19 Holding power 1007 Self-adhering polymer modified bituminous waterproof sheet GB 23441-2009 Pre-applied and wet installed waterproof sheets GB/T 23457-2009 20 Thermal aging 21 Thermal stability 22 Tear strength Pre-applied and wet installed waterproof sheets GB/T 23457-2009 23 Water absorption Polyvinyl chloride plastic sheets for waterproofing GB12952-2011 24 Chemical environmental resistance 2 Waterproof coating 1 Tensile strength 1007 Test methods for building waterproof coatings GB/T16777-2008 Polymer emulsion architectural waterproof coating JC/T864-2008 Polyurethane waterproofing coating GB/T19250-2003 Waterproofing coating for concrete bridge and roadsurface JC/T975-2005Polymer modified cementitious waterproofing coating GB/T 23445-2009 2 Elongation at break 3 Flexibility/flexibility at low temperature 2 Waterproof coating 4 Water impermeability 1007 Test methods for building waterproof coatings GB/T16777-2008 Polymer emulsion architectural waterproof coating JC/T864-2008 Polyurethane waterproofing coating GB/T19250-2003 Waterproofing coating for concrete bridge and roadsurface JC/T975-2005 Polymer modified cementitious waterproofing coating GB/T 23445-2009 Polymer modified cement slurry for waterproof JC/T 2090-2011 2 Waterproof coating 5 Solid content 1007 Test methods for building waterproof coatings GB/T16777-2008 Polyurethane waterproofing coating GB/T19250-2003 Waterproofing coating for concrete bridge and road surface JC/T975-2005 Polymer modified cementitious waterproofing coating GB/T 23445-2009 6 Drying time(surface dry-time,real dry-time) Test methods for building waterproof coatings GB/T16777-2008 Polyurethane waterproofing coating GB/T19250-2003 Waterproofing coating for concrete bridge and road surface JC/T975-2005 Polymer modified cement slurry for waterproof JC/T 2090-2011 2 Waterproof coating 7 Flex after heating 1007 Test methods for building waterproof coatings GB/T16777-2008 Polyurethane waterproofing coating GB/T19250-2003 8 Aging at stretching Polyurethane waterproofing coating GB/T19250-2003 2 Waterproof coating 9 Adhesion strength 1007 Test methods for building waterproof coatings GB/T16777-2008 Polyurethane waterproofing coating GB/T19250-2003 Waterproofing coating for concrete bridge and road surface JC/T975-2005 Polymer modified cementitious waterproofing coating GB/T 23445-2009 Polymer modified cement slurry for waterproof JC/T 2090-2011 2 Waterproof coating 10 Permeability resistance 1007 Polymer modified cementitious waterproofing coating GB/T 23445-2009 Inorganic waterproof and leakage-preventing materials GB 23440-2009 Polymer modified cement slurry for waterproof JC/T 2090-2011 11 Heat resistance Waterproofing coating for concrete bridge and road surface JC/T975-2005 Emulsified aspHalt waterproof coating JC408-2005 12 Cracking resistance Solvent for rubber aspHalt water-resistant coating JC/T 852-1999 13 Salt treatment Waterproofing coating for concrete bridge and road surface JC/T975-2005 2 Waterproof coating 14 Acid and alkali treatment 1007 Test methods for building waterproof coatings GB/T16777-2008 Polymer emulsion architectural waterproof coating JC/T864-2008 Polyurethane waterproofing coating GB/T19250-2003 Emulsified aspHalt waterproof coating JC408-2005 15 Ultraviolet radiation treatment Test methods for building waterproof coatings GB/T16777-2008 Emulsified aspHalt waterproof coating JC408-2005 16 Heat aging Waterproofing coating for concrete bridge and road surface JC/T975-2005 Test methods for building waterproof coatings GB/T16777-2008 Emulsified aspHalt waterproof coating JC408-2005 2 Waterproof coating 17 Flexible property 1007 Polymer modified cement slurry for waterproof JC/T 2090-2011 18 Compressive strength 19 Bending strength 20 Alkali resistance 21 Frost resistance 22 Shrinkage ratio 23 Heat resistance 3 Rigid waterproof-ing materials 1 Setting time 1001 Test methods for water requirement of normal consistency,setting time and soundness of the portland cements GB/T1346-2011 2 Soundness 3 Rigid waterproof-ing materials 3 Compressive strength 1001 Method of testing cements--Determination of strength GB/T17671-1999 4 Bending strength 3 Rigid waterproof-ing materials 5 Cohesive strength 1001 Inorganic waterproof and leakage-preventing materials GB 23440-2009 6 Permeability pressure(28d、56d) Water-repellent admixture for mortar and concrete JC 474-2008 Cementitious capillary crystalline waterproofing materials GB 18445-2012 7 Heat resistance Inorganic waterproof and leakage-preventing materials GB 23440-2009 8 Freeze-thaw resistance Testing methods for long-term and long-lasting performance of ordinary concrete GB/T 50082-2009 9 Water content Methods for testing uniformity of concrete admixture GB/T8077-2012 10 Chloride content 11 Fineness 12 Total alkali content Concrete admixtures GB8076-2008 3 Rigid waterproof-ing materials 13 Water reducing ratio 1001 Concrete admixtures GB8076-2008 14 Bleeding rate 15 Air content 16 shrinkage Concrete admixtures GB8076-2008 Polymer modified cement mortars for waterproof JC/T 984-2011 17 Steel corrosion Concrete admixtures GB8076-2008 18 The bond strength of wet base surface Cementitious capillary crystalline waterproofing materials GB 18445-2012 19 permeability of sample coat Inorganic waterproof and leakage-preventing materialsGB23440-2009 20 permeability of specimen 21 Frost resistance Polymer modified cement mortars for waterproof JC/ T984-2011 4 Water-repellent admixture 1 Appearance 0318 Water-soluble infiltrative inorganic water-repellent admixture JC/T 1018-2006 Silicone hydropHobic agent for construction surfaces JC/T902-2002 2 pH value Methods for testing uniformity of concrete admixture GB/T8077-2012 3 Water absorption Silicone hydropHobic agent for construction surfaces JC/T902-2002 4 Penetrating capacity(after standard state,low temperature treat,ultraviolet treat,acid treat,alkali treat) 5 Viscosity Determination of viscosity of coatings GB1723-1993 4 Water-repellent admixture 6 Gel time 0318 Water-soluble infiltrative inorganic water-repellent admixture JC/T 1018-2006 7 Permeability resistance 8 Stability 5 Protective agent 1 Waterproof performance 0318 Natural stone protector for building decoration JC/T973-2005 2 Stain resistance 3 Acid resistance 4 Alkali resistance 5 Accelerated aging Ⅷ Joint sealing material 1 Joint sealing material 1 Apparaennce 0223 Jointing sealants for concrete JC/T 881-2001 Sealants for joint Glass Curtain Wall JC/T 882-2001 Sealants for stone GB/T 23261-2009 Structural silicon sealants for building GB 16776-2005 Silicone sealant for building GB/T 14683-2003 2 Density Test method for building sealants Part 2:Determination of density GB/T13477.2-2002 3 Tack-free time Test method for building sealants Part 5:Determination for tack-free time GB/T13477.5-2002 4 Flow/slump Test method for building sealants Part 6:Determination of flow GB/T 13477.6-2002 5 Tensile bond strength/tensile modulus Test method for building sealants Part 8:Determination of tensile properties GB/T13477.8-2002 1 Joint sealing material 6 Elongation at break 0223 Test method for building sealants Part 8:Determination of tensile properties GB/T13477.8-2002 7 Tensile bond strength/tensile modulus after soggy Test method for building sealants Part 9:Determination of adhesion/cohesion properties after immersion in water GB/T13477.9-2002 8 Elongation at break after soggy 9 Tensile properties at maintained extention Test method for building sealants Part 10:Determination of tensile properties at maintained extension GB/T13477.10-2002 10 Tensile properties at maintained extention after soggy Test method for building sealants Part 11:Determination of adhesion/cohesion properties at maintained extension after immersion in water GB/T 13477.11-2002 1 Joint sealing material 11 Determination of adhesion/cohesion properties at constant temperature 0223 Test method for building sealants Part 12:Determination of adhesion/cohesion properties at constant temperature GB/T 13477.12-2002 12 Adhesion properties after cold-tensile and hot-compress Test method for building sealatns part 13:Deter-mination of adhesion/cohesion properties at variable temperatures GB/T13477.13-2002 13 Determination of resistance to prolonged exposure to water Test method for building sealants Part 14:Determination of resistance to prolonged exposure to waterGB/T 13477.14-2002 14 Elastic recovery Test method for building sealants Part 17:Deter-mination of elastic recovery GB/T13477.17-2002 1 Joint sealing material 15 Adhesion-in-peel 0223 Test method for building sealants part 18:Deter-mination of adhesion-in-peel GB/T 13477.18-2002 16 Change in massand volume Test method for building sealants Part 19:Determination of change in mass and volume GB/T 13477.19-2002 17 Staining Test method for building sealants Part 20:Deter-mination of staining GB/T 13477.20-2002 18 Ultraviolet radiation treatment Building sealants for stone GB/T 23261-2009 Sealants for prepainted steel sheetn JC/T 884-2001 1 Joint sealing material 19 Shore hardness 0223 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1:Duromerer method (Shore hardness) GB/T 531.1-2008 2 Waterstop 1 Shore hardness 0223 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1:Duromerer method (Shore hardness GB/T 531.1-2008 2 Tensile strength Rubber, vulcanized or thermoplastic--Determination of tensile stress-strain properties GB/T528-2009 3 Elongation at break 4 Tearing strength Rubber, vulcanized or thermoplastic--Determination of tear strength (Trouser, angle and crescent test pieces GB/T529-2008 2 Waterstop 5 Compressions set 0223 Rubber, Vulcanized or thermoplastic--Determination of compression set at ambient elevated or low temperatures GB/T7759-1996 6 Thermal air aging property Rubber,vulcanized or thermoplastic--Accelerated ageing and heat resistance tests-Air-oven method GB/T3512-2001 7 Sticking together strength of rubber to metal Polymer water-proof materials Part 2:Waterstop GB 18173.2-2000 8 Density Rubber,vulcanized or thermoplastic - Determination of density GB/T 533-2008 9 Apperance Water-swellable waterstopa band from bentonite and rubber JG/T 141-2001 10 Dimension 11 Anti-water pressure 12 Expand rate 2 Waterstop 13 Heat resistance 0223 Water-swellable waterstopa band from bentonite and rubber JG/T 141-2001 14 Test at low temperature 15 Water resistance Ⅸ Adhesive 1 Adhesive 1 Open assembly time 0318 Adhesives for ceramic wall and floor tiles JC/T547-2005 2 Adhesion properties after soaking 3 Adhesion properties after heating 4 Temperature variation properties 5 Tensile strength (standard condition,hot treat,freeze-thaw cycle) 1 Adhesive 6 Solid content/Nonvolatile content 0318 Test method for nonvolatile content of adhesives GB/T2793-1995 Testing methods for construction adhesives - Part 1: Test methods for ceramic tiles adhesives GB/T 12954.1-2008 7 Tensile strength Test methods for properties of resin casting boby GB/T 2567-2008 8 Elastic module (in bending、tension) 9 Percentage elongation 10 Pot life Testing methods for construction adhesives - Part 1: Test methods for ceramic tiles adhesives GB/T 12954.1-2008 1 Adhesive 11 Tensile shear strength 0318 Adhesives - Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies GB/T 7124-2008 Technical specification for strengthening concrete structures with carbon fiber reinforced polymer laminate CECS 146:2003(2007) Design code for strengthening concrete structure GB50367-2006 1 Adhesive 12 Adhesion strength under tensile stress 0318 Adhesives--Determination of tensile strength of butt joints GB/T 6329-1996 Testing Standard of Adhesive Strength of tapestry brick for construction engineering JGJ 110-2008 Technical specification for strengthening concrete structures with carbon fiber reinforced polymer laminate CECS 146:2003(2007) Design code for strengthening concrete structure GB50367-2006 1 Adhesive 13 Compressive strength 0318 Technical specification for strengthening concrete structures with carbon fiber reinforced polymer laminate CECS 146:2003(2007) Resin for strengthening and restoring structures with fiber laminate JG/T166-2004 Test methods for propertiesof resin casting boby GB/T 2567-2008 1 Adhesive 14 Bending strength 0318 Technical specification for strengthening concrete structures with carbon fiber reinforced polymer laminate CECS 146:2003(2007) Resin for strengthening and restoring structures with fiber laminate JG/T166-2004 Test methods for properties of resin casting boby GB/T 2567-2008 Design code for strengthening concrete structure GB50367-2006 15 Gel time Resin for strengthening and restoring structures with fiber laminate JG/T166-2004 Determination of gelation time of epoxide resins GB/T 12007.7-1989 1 Adhesive 16 Thermal deformation temperature 0318 Plastics-Determination of temperature of deflection under load-Part 1:General test method GB/T 1634.1-2004 17 Butt joint tensile strength Adhesives--Determination of tensile strength of butt joints GB/T 6329-1996 18 Tensile strength Design code for strengthening concrete structure GB50367-2006 19 Viscosity Determination methods for viscosity of adhesives Single-cylinder rotary viscometer GB/T 2794-2013 Limited rotation viscosity agent 20 Density Test method for density of adhesives in fluid form—Method of weight cup GB/T 13354-1992 21 Sliding Adhesives for ceramic wall and floor tiles JC/T547-2005 Ⅹ Pipe materials 1 Pipes for water supply, drainage and Sewerage 1 Appearance 0315 Unplasticized poly (vinyl chloride)(PVC-U)pipes for soil and waste discharge inside buildings GB/T5836.1-2006 Unplatiscized poly (vinyl chloride)(PVC-U) pipes for water supply GB/T10002.1-2006 Polyethylene pipes for water supply GB/T13663-2000 Unplasticized polyvinyl chloride (PVC-U) pipes with a cellular core for drainage GB/T16800-2008 Unplasticized polyvinyl chloride(PVC-U)structure wall pipline system for underground soil waste and drainage—Part 1:Double wall corrugated pipes GB/T 18477.1-2007 1 Pipes for water supply, drainage and Sewerage 1 Appearance 0315 Polypropylene piping systems for hot and cold water installation-Part 2:Pipes GB/T 18742.2-2002 Polyethylene structure wall pipeline system for underground usage Part 1:Polyethylene double wall corrugated pipes GB/T19472.1-2004 Polyethylene structure-wall piping system for underground usage part 2:Polyethylene spirally enwound structure-wall pipes GB/T 19472.2-2004 Unplasticized poly(vinyl chloride)(PVC-U)pipes for non-pressure buried drainage and sewerage systems GB/T20221-2006 Glass fiber reinforced plastics mortar pipes GB/T 21238-2007 Polyethylene(PE) composite pipes with porous steelstrip for water supply CJ/T181-2003 Steel wire reinforced thermoplastics (PE) composite pipe and fitting CJ/T 189-2007 1 Pipes for water supply, drainage and Sewerage 2 Dimension 0315 Plastics piping systems - Plastics components - Determination of dimensions GB/T 8806-2008 Glass fiber reinforced plastics mortar pipes GB/T 21238-2007 3 Tensile strength Thermoplastic pipes-Determination of tensile properties-Part 2:Pipes made of unplasticized poly(vinyl chloride)(PVC-U),chlorinated poly(vinyl chloride)(PVC-C) and high-impact poly(vinyl chloride)(PVC-HI) GB/T8804.2-2003 1 Pipes for water supply, drainage and Sewerage 4 Percentage elongation at fracture 0315 Thermoplastic pipes-Determination of tensile properties-Part 3:Polyolefin pipes GB/T 8804.3-2003 1 Pipes for water supply, drainage and Sewerage 5 Lognitudinal reversion 0315 Thermoplastics pipes-Determination of longitudinal reversion GB/T6671-2001 6 Drop hammer impact/impact strength Thermoplastics pipes-Determination of resistance to external blows-Round-the-clock method GB/T14152-2001 The polyethylene spirally enwound structure-wall pipes and the polyethylene double wall corrugatedpipes Except for be tested when the nominal diameters are 500mm;the other pipes also Except for be tested when the outside diameters are less than or equal to 400 mm 7 Vicat softening temperature Thermoplastics pipes and fitting-Determination of vicat softening temperature GB/T8802-2001 1 Pipes for water supply, drainage and Sewerage 8 Imtransparency 0315 Unplatiscized poly (vinyl chloride)(PVC-U) pipes for water supply GB/T10002.1-2006 Polypropylene piping systems for hot and cold water installation-Part 2:Pipes GB/T 18742.2-2002 9 Density Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method GB/T 1033.1-2008 10 Resistance to Hydrostatic pressure Thermoplastics pipes for the conveyance of fluids-Resistance to internal pressure-Test method GB/T6111-2003 11 Curvature Determination of deflection for rigid plastic pipes QB/T 2803-2006 1 Pipes for water supply, drainage and Sewerage 12 Ring stiffness 0315 Thermoplastics pipes-Determination of ring stiffness GB/T 9647-2003 Unplasticized polyvinyl chloride (PVC-U) pipes with a cellular core for drainage GB/T16800-2008 Polyethylene structure-wall piping system for underground usage part 2:Polyethylenespirally enwound structure-wall pipes GB/T 19472.2-2004 Glass fiber reinforced plastics mortar pipes GB/T 21238-2007 Accredited only for:The pipes can be tested only when the outside diameters are less than or equal to 1000 mm 1 Pipes for water supply, drainage and Sewerage 13 Ring stiffness 0315 Thermoplastics pipes-Determination of ring stiffnessGB/T 9647-2003Unplasticized polyvinyl chloride(PVC-U)structure wall pipline system forunderground soil waste and drainage—Part 1:Double wallcorrugated pipesGB/T 18477.1-2007Polyethylene structure wall pipeline system for underground usage Part 1:Polyethylene double wall corrugated pipesGB/T19472.1-2004Polyethylene structure-wall piping system for underground usage part 2:Polyethylenespirally enwound structure-wall pipes GB/T 19472.2-2004 Accredited only for:The pipes can be tested only when the outside diameters are less than or equal to 1000 mm 1 Pipes for water supply, drainage and Sewerage 14 Bursting test/ Bursting strength test 0315 Standard test method for short-time hydraulic failure and resistance to constant internal pressure of the plastics pipes for the transport of fluids GB/T 15560-1995 15 Cracking stability under condition of compression Steel wire reinforced thermoplastics (PE) composite pipe and fitting CJ/T 189-2007 1 Pipes for water supply, drainage and Sewerage 16 Film oven test 0315 Polyethylene structure wall pipeline system for underground usage Part 1:Polyethylene double wall corrugated pipes GB/T19472.1-2004 Polyethylene structure-wall piping system for underground usage part 2:Polyethylene spirally enwound structure-wall pipes GB/T 19472.2-2004 Unplasticized polyvinyl chloride(PVC-U)structure wall pipline system forunderground soil waste and drainage—Part 1:Double wallcorrugated pipes GB/T 18477.1-2007 1 Pipes for water supply, drainage and Sewerage 17 Flattening test 0315 Unplasticized polyvinyl chloride (PVC-U) pipes with a cellular core for drainage and sewerage systems GB/T16800-2008 Polyethylene(PE) composite pipes with porous steel strip for water supply CJ/T 181-2003 Coating plastic steel pipe for water supply CJ/T 120-2008 Technical specification for testing compressive strength of masonry mortar by penetration resistance method JGJ/T136-2007 18 Simply-supported beam impact Thermoplastics pipes for the transport of fluids-Determinaiton of impact by the charpy method GB/T18743-2002 1 Pipes for water supply, drainage and Sewerage 19 Adhesion force 0315 Coating plastic steel pipe for water supply CJ/T 120-2008 20 Adhesive strength test Steel pipes of lining plastic for water supply CJ/T136-2007 2 Fittings for water supply, drainage and Sewerage 1 Appearance 0315 Unplasticized poly(vinyl chloride)(PVC-U) fittings for soil and waste inside buildings GB/T 5836.2-2006 Fittings made of unplasticized poly(vinyl chloride) (PVC-U)for water supply GB/T10002.2-2003 Polypropylene piping systems for hot and cold water installation-Part 3:Fittings GB/T18742.3-2002 2 Dimension 3 Vicat softening temperature Thermoplastics pipes and fitting-Determination of vicat softening temperature GB/T8802-2001 2 Fittings for water supply, drainage and Sewerage 4 Film oven test 0315 Injection-moulded unplasticized poly(vinyl chloride)(PVC-U),chlorinated poly(vinyl chloride)(PVC-C),acrylonitrile butadiene-styrene(ABS)and acrylonitrile-styrene-acrylester(ASA)fittings Hot oven test method GB/T8803-2001 5 Falling test Test method for unplasticized polyvinyl chloride(PVC-U)fittings by falling GB/T8801-2007 6 Density Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method GB/T 1033.1-2008 2 Fittings for water supply, drainage and Sewerage 7 Resistance to Hydrostatic pressure 0315 Fittings made of unplasticized poly(vinyl chloride) (PVC-U)for water supply GB/T10002.2-2003 Polypropylene piping systems for hot and cold water installation-Part 3:Fittings GB/T18742.3-2002 8 Imtransparency Polypropylene piping systems for hot and cold water installation-Part 3:Fittings GB/T18742.3-2002 3 Ventilating duct for residential kitchen and bathroom 1 Appearance 0315 Ventilating duct for residential kitchen and bathroom JG/T 194-2006 2 Dimension 3 Loading test 4 Anti-flexible impact 4 Glassfiber reinforced cement duct forventilation 1 Appearance 0315 Glassfiber reinforced cement duct for ventilation JC/T 854-2008 Glassfibre reinforced cement finished products JC/T 940-2004 Glass fibre reinforced magnesium oxychloride cement ventiduct JC/T 646-2006 2 Dimension 3 Density Glassfiber reinforced cement duct for ventilation JC/T 854-2008 Glassfibre reinforced cement finished products JC/T 940-2004 Glass fibre reinforced magnesium oxychloride cement ventiduct JC/T 646-2006 Test methods for the properties of glassfibre reinforced cement GB/T 15231-2008 4 Glassfiber reinforced cement duct forventilation 4 Water absorption 0315 Glassfiber reinforced cement duct for ventilation JC/T 854-2008 Glass fibre reinforced magnesium oxychloride cement ventiduct JC/T 646-2006 Test methods for the properties of glassfibre reinforced cement GB/T 15231-2008 5 Impact propertues 6 Loading test Glassfiber reinforced cement duct for ventilation JC/T 854-2008 7 Bending strength Glass fibre reinforced magnesium oxychloride cement ventiduct JC/T 646-2006 Test methods for the properties of glassfibre reinforced cement GB/T 15231-2008 4 Glassfiber reinforced cement duct forventilation 8 Tensile strength 0315 Test methods for the properties of glassfibre reinforced cement GB/T 15231-2008 9 Compressive strength 4 Glassfiber reinforced cement duct forventilation 10 Soften coefficient 0315 Glass fibre reinforced magnesium oxychloride cement ventiduct JC/T 646-2006 11 Frost resistance Glassfibre reinforced cement finished products JC/T 940-2004 Glass fibre reinforced magnesium oxychloride cement ventiduct JC/T 646-2006 Test methods for the properties of glassfibre reinforced cement GB/T 15231-2008 5 Welded steel pipe for low pressure liquid delively 1 Tensile strength 0339 Metallic materials - Tensile testing - Part 1 : Method of test at room temperature GB/T228.1-2010 5 Welded steel pipe for low pressure liquid delively 2 Flattening test 0339 Metal materials-Tube-Flattening test GB/T246-2007 3 Bending test Metallic materials—Tube--Bend test GB/T244-2008 4 Zn-coat thickness Welded steel pipe for low pressure liquid delively GB/T3091-2008 5 Zn-coat uniformity 6 Thickness 7 Dimension 6 Plain carbon steel pipes for electric wire 1 Bending 0339 Welded steel pipes for low pressure liquid delivery GB/T244-2008 2 Uinformity of Zn-coat Carbon structural steel pipes for electric wire YB/T 5305-2008 3 Zn-coat thickness 4 Dimension Particular specifications for metal conduits for electrical installations GB/T 14823.1-1993 5 Compressive 7 Electrical Insulation Pipes for electric wire in constructions 1 Appearance 0315 Electrical Insulation pipes for electric wire in constructions JG 3050-1998 2 Dimension 3 Compression performance 4 impact property 5 Bending property 6 Flattening property 7 Droping property 8 Heat resistance 9 Self-quench time 10 Oxygen exponent 11 Electrical property 8 Pipes for electric wire 1 Appearance 0315 Buried multi-hole plastics pipes for communication Part 1:Unplasticsized polyvinyl chloride(PVC-U) multi-hole pipes QB/T 2667.1-2004 Buried chlorinated polyvinyl chloride (PVC-C) pipes for high-tension power cable QB/T 2479-2005 Plastic Pipes for underground Communication pipeline Part 1: General YD/T 841.1-2008 Technical requirements for electric cable conduits Part 1: GeneralD L/T 802.1-2007 2 Dimension 3 Curvature Determination of deflection for rigid plastic pipes QB/T 2803-2006 8 Pipes for electric wire 4 Tensile strength 0315 Thermoplastic pipes-Determination of tensile properties-Part 2:Pipes made of unplasticized poly(vinyl chloride)(PVC-U),chlorinated poly(vinyl chloride)(PVC-C) and high-impact poly(vinyl chloride)(PVC-HI) GB/T8804.2-2003 Thermoplastic pipes-Determination of tensile properties-Part 3:Polyolefin pipes GB/T 8804.3-2003 Fiber-reinforced plastics composites—Determination of tensile properties GB/T 1447-2005 5 Elongation at break Thermoplastic pipes-Determination of tensile properties-Part 3:Polyolefin pipes GB/T 8804.3-2003 8 Pipes for electric wire 6 Lognitudinal reversion 0315 Thermoplastics pipes-Determination of longitudinal reversion GB/T6671-2001 7 Vicat softening temperature Thermoplastics pipes and fitting-Determination of vicat softening temperature GB/T8802-2001 8 Pipes for electric wire 8 Drop hammer impact 0315 Buried multi-hole plastics pipes for communication Part 1:Unplasticsized polyvinyl chloride(PVC-U) multi-hole pipes QB/T 2667.1-2004 Plastic Pipe for Buried Communication Conduit Part 2:Solid-Wall PipeY D/T 841.2-2008 Plastic Pipe for Buried Communication Conduit Part 3:Double-Wall Corrugated Pipe YD/T 841.3-2008 Plastic Pipe for Buried Communication Conduit Part 5:Plum Blossom Pipe YD/T 841.5-2008 Buried chlorinated polyvinyl chloride (PVC-C) pipes for high-tension power cable QB/T 2479-2005 8 Pipes for electric wire 9 External load resistance 0315 Buried multi-hole plastics pipes for communication Part 1:Unplasticsized polyvinyl chloride(PVC-U) multi-hole pipes QB/T 2667.1-2004 10 Heat compression of ring piece Buried chlorinated polyvinyl chloride (PVC-C) pipes for high-tension power cable QB/T 2479-2005 11 Bending strength Fibre-reinforced plastic composites—Determination of flexural properties GB/T 1449-2005 12 Pipe stiffness/ Ring stiffness Technical requirements for electric cable conduits Part 2: Cable conduits of fiberglass reinforced plastics DL/T 802.2-2007 Plastic Pipes for underground Communication pipeline Part 1: General YD/T 841.1-2008 8 Pipes for electric wire 13 Plastics-Determination of temperature of deflection under load Plastics-Determination of temperature of deflection under load-Part 2:Plastids,ebonite and long-fibre-reinforced composites GB/T 1634.2-2004 14 Flattening test Plastic Pipes for underground Communication pipeline Part 1: General YD/T 841.1-2008 15 Drop test Plastic Pipes for underground Communication pipeline Part 1: General YD/T 841.1-2008 9 Metal tubes 1 Hydraulic pressure test 0315 Metal materials-Tube-Hydrostatic pressure test GB/T 241-2007 10 Welded stainless steel tubes for architect-ural decoration 1 Tensile 0301 Welded stainless steel tubes for architectural decoration JG/T 3030-1995 2 Flattening 3 Bending 4 Dimension 11 Steel Pipe 1 Yield strength 0301 Metallic materials - Tensile testing - Part 1 : Method of test at room temperature GB/T228.1-2010 2 Tensile strength 3 Bending Metallic materials—Tube--Bend test GB/T244-2008 4 Flattening Metal materials-Tube-Flattening test GB/T246-2007 12 well lid 1 Appearance 0301 Steel fiber reinforced concrete checking well cover JC889-2001 Cast iron manhole top CJ/T3012-1993 Glass fiber reinforced composite inspection well lid JC/T1009-2006 Manhole cover GB/T 23858-2009 2 Dimension 3 Load capacity Ⅺ Thermal insulation materials materials 1 Dry-mixedthermal insulating composition for buildingsAnd thermal insulating rendering systems 1 Appearance 1005 Dry-mixed thermal insulating composition for buildings GB/T 20473-2006 2 Dry density Dry-mixed thermal insulating composition for buildings GB/T 20473-2006 The material of external thermal insulating rendering systems made of mortar with mineral binder and using expanded polystyrene granule as aggredate JG/T 158-2013 3 Radioactivity Limit of radionuclides in building materials GB6566-2010 1 Dry-mixedthermal insulating composition for buildingsAnd thermal insulating rendering systems 4 Compressive strength 1005 Test methods for inorganic rigid thermal insulation GB/T5486-2008 The material of external thermal insulating rendering systems made of mortar with mineral binder and using expanded polystyrene granule as aggredate JG/T 158-2013 5 Frost resistance Dry-mixed thermal insulating composition for buildings GB/T 20473-2006 6 Soften coefficient Dry-mixed thermal insulating composition for buildings GB/T 20473-2006 The material of external thermal insulating rendering systems made of mortar with mineral binder and using expanded polystyrene granule as aggredate JG/T 158-2013 1 Dry-mixedthermal insulating composition for buildingsAnd thermal insulating rendering systems 7 Thermal coefficient 1016 Thermal insulation--Determination of steady-state thermal resistance and related properties--Guarded hot plate apparatus GB/T 10294-2008 Thermal insulation—Determination of steady-state thermal resistance and related properties—Heatflow meter apparatus GB/T 10295-1988D ry-mixed thermal insulating composition for buildings GB/T 20473-2006 8 Linear shrinkage ratio Testing methods of mortar basic property JGJ/T 70-2009 The material of external thermal insulating rendering systems made of mortar with mineral binder and using expanded polystyrene granule as aggredate JG/T 158-2013 1 Dry-mixedthermal insulating composition for buildingsAnd thermal insulating rendering systems 9 Compression-shearing strength 1016 The material of external thermal insulating rendering systems made of mortar with mineral binder and using expanded polystyrene granule as aggredate JG/T 158-2013 10 Compression-shearing strength after soaking 11 Compression-shearing strength after freezing and thawing 12 Compression-shearing strength after heating 1 Dry-mixedthermal insulating composition for buildingsAnd thermal insulating rendering systems 13 Working time 1016 The material of external thermal insulating rendering systems made of mortar with mineral binder and using expanded polystyrene granule as aggredate JG/T 158-2013 External thermal insulation composite systems based on expanded polystyrene JG149-2003 14 Tensile bond strength 15 Tensile bond strength after soaking 1 Dry-mixedthermal insulating composition for buildingsAnd thermal insulating rendering systems 16 Flexibility 1016 Method of testing cements--Determination of strength GB/T17671-1999 The material of external thermal insulating rendering systems made of mortar with mineral binder and using expanded polystyrene granule as aggredate JG/T 158-2013 17 Percentage elongation atfracture Test methods for building waterproof coatingsGB/T16777-2008The material of external thermal insulating rendering systems made of mortar with mineral binder and using expanded polystyrene granule as aggredate JG/T 158-2013 18 Involatile content The material of external thermal insulating rendering systems made of mortar with mineral binder and using expanded polystyrene granule as aggredate JG/T 158-2013 1 Dry-mixedthermal insulating composition for buildingsAnd thermal insulating rendering systems 19 Stability for storage 1016 The material of external thermal insulating rendering systems made of mortar with mineral binder and using expanded polystyrene granule as aggredate JG/T 158-2013 20 State in container 21 Workability 22 Drying time 23 Wearing capability 24 Water resistance 25 Alkali resistance 26 Flexility 27 Storage stability at low temperature 28 Water permeability 2 Termal insulating panels 1 Dimensional stability / Change in dimensionschanging rate 1016 Test method for dimensional stability of rigid cellular plastics GB/T 8811-2008 Cellular plastics and rubbers--Determination of linear dimensions GB/T6342-1996 Preformed flexible elastomeric cellular thermal insulation GB/T 17794-2008 Moulded polystyrene foam board for thermal insulation GB/T 10801.1-2002 Rigid extruded polystyrene foam board for thermal insulation (XPS) GB/T 10801.2-2002 Spray-applied rigid polyurethane cellular plastics GB/T 20219-2006 External thermal insulation composite systems based on expanded polystyrene JG149-2003 2 Termal insulating panels 2 Appearance 1016 Preformed flexible elastomeric cellular thermal insulation GB/T 17794-2008 Moulded polystyrene foam board for thermal insulation GB/T 10801.1-2002 Rigid extruded polystyrene foam board for thermal insulation (XPS) GB/T 10801.2-2002 2 Termal insulating panels 3 Density 1016 Cellular plastics and rubbers - Determination of apparent density GB/T6343-2009 Preformed flexible elastomeric cellular thermal insulation GB/T 17794-2008 Moulded polystyrene foam board for thermal insulation GB/T 10801.1-2002 External thermal insulation composite systems based on expanded polystyrene JG149-2003 2 Termal insulating panels 4 Water absorption 1016 Determination of water absorption of rigid cellular plastics GB/T8810-2005 Moulded polystyrene foam board for thermal insulation GB/T 10801.1-2002 Rigid extruded polystyrene foam board for thermal insulation (XPS) GB/T 10801.2-2002 Spray polyurethane foam for thermal insulation JC/T998-2006 5 Vacuum water absorption Preformed flexible elastomeric cellular thermal insulation GB/T 17794-2008 2 Termal insulating panels 6 Oxygen exponent 1016 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test GB/T 2406.2-2009 Moulded polystyrene foam board for thermal insulation GB/T 10801.1-2002 Spray polyurethane foam for thermal insulation JC/T998-2006 2 Termal insulating panels 7 Burning grade(B2) 1016 Test method of flammability for building materials GB 8626-2007 Classification for burning behavior of building materials and products GB8624-2012 Moulded polystyrene foam board for thermal insulation GB/T 10801.1-2002 Rigid extruded polystyrene foam board for thermal insulation (XPS) GB/T 10801.2-2002 2 Termal insulating panels 8 Heat conductivitycoefficient 1016 Thermal insulation—Determination of steady-state thermal resistance and related properties--Guarded hot plate apparatus GB/T 10294-2008 Thermal insulation—Deter-mination of steady-state thermal resistance and related properties--Heat flow meter apparatus GB/T 10295-1988 Test method for thermal conductivity of plastics by means of the guarded hot plate GB/T 3399-1982 Moulded polystyrene foam board for thermal insulation GB/T 10801.1-2002 Rigid extruded polystyrene foam board for thermal insulation (XPS) GB/T 10801.2-2002 Spray polyurethane foam for thermal insulation JC/T998-2006 Spray-applied rigid polyurethane cellular plastics GB/T 20219-2006 2 Thermal insulating panels 8 Heat conductivitycoefficient 1006 External thermal insulation composite systems based on expanded polystyrene JG149-2003 9 Compressive strength Rigid cellular plastics - Determination of compression properties GB/T 8813-2008 Moulded polystyrene foam board for thermal insulation GB/T 10801.1-2002 Rigid extruded polystyrene foam board for thermal insulation (XPS) GB/T 10801.2-2002 Spray-applied rigid polyurethane cellular plastics GB/T 20219-2006 10 Permeability resistance Spray polyurethane foam for thermal insulation JC/T998-2006 2 Termal insulating panels 11 Tensile strength by plumb -plate 1006 External thermal insulation composite systems based on expanded polystyrene JG149-2003 3 inorganic rigid thermal insulation 1 Dimension 1006 Test methods for inorganic rigid thermal insulation GB/T 5486-2008 2 Appearance 3 Compression strength 4 Flexural strength 5 Water content 6 Density Test methods for inorganic rigid thermal insulation GB/T5486-2008 Cellular glass product for thermal insulation JC/T 647-2005 3 inorganic rigid thermal insulation 7 Heat conductivitycoefficient 1006 Thermal insulation—Determination of steady-state thermal resistance and related properties--Guarded hot plate apparatus GB/T 10294-2008 Thermal insulation—Determination of steady-state thermal resistance and related properties--Heat flow meter apparatus GB/T 10295-1988 8 Water absorption Cellular glass product for thermal insulation JC/T 647-2005 Test methods for inorganic rigid thermal insulation GB/T5486-2008 4 Mineral wool and Glass wool 1 Compressive strength 1006 Test method for measuring compressive properties of mineral wool products GB/T 13480-1992 Rock wool,slag wool thermal insulating products for building GB/T 19686-2005 2 Water absorption Test methods for mineral wool and its products GB/T 5480-2008 3 Apparent density/density 4 Mineral wool and Glass wool 4 Heat conductivity coefficient/heat-resistance 1006 Thermal insulation—Determination of steady-state thermal resistance and related properties--Guarded hot plate apparatus GB/T 10294-2008 Thermal insulation—Determination of steady-state thermal resistance and related properties--Heat flow meter apparatus GB/T 10295-1988 5 Tensile strength Rock wool products for exterior insulation and finish systems(EIFS) GB/T 25975-2010 6 Moisture absorption Test methods for mineral wool and its products GB/T 5480-2008 5 Glass fiber mesh 1 Mass per unit area 1006 Test method for reinforcement products Part 3: Deter-mination of mass per unit area GB/T 9914.3-2001 5 Glass fiber mesh 2 Tensile breaking force 1006 Reinforcements--Test method for woven fabrics Part 5: Determination of tensile breaking force and elongation at break for glass fibre GB/T 7689.5-2001 3 Alkali-resistant strength retention(Alkali resistance) Reinforcements--Test method for woven fabrics Part 5: Determination of tensile breaking force and elongation at break for glass fibre GB/T 7689.5-2001 Test method for determining tensile breaking strength of glass fiber reinforcing mesh,after exposure to a sodium hydroxide solution GB/T 20102-2006 External thermal insulation composite systems based on expanded polystyrene JG 149-2003 5 Glass fiber mesh 4 elongation at break 1006 Reinforcements--Test method for woven fabrics Part 5: Determination of tensile breaking force and elongation at break for glass fibre GB/T 7689.5-2001 5 Coating volume(combustible matter content) Test method for reinforcement products Part 2: Determination of combustible matter content for glass fibre GB/T 9914.2-2001 Ⅻ Roads and bridges material 1 Bitumen and bituminous mixtures 1 AspHalt Penetration 1007 Standard Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering JTG E20-2011 2 AspHalt ductility 3 AspHalt soft point 4 adhesive ability of AspHalt and rough aggregate 5 Density 1 Bitumen and bituminous mixtures 6 Marshall stability 1007 Standard Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering JTG E20-2011 7 Marshall test of bituminous paving core 8 AspHalt content 9 Mineral materials grading Test Methhods of Aggregate for Highway Engineering JTG E42—2005 10 Mixture ratio design Technical specifications for construction of highway aspHalt pavements JTG F40-2004 11 Theory most greatly relative density(Vacuum method) Standard Test Methods of Bitumen and Bituminous Mixtures for Highway EngineeringJTG E20-2011 ⅩⅢ Highway Engineer-ing 1 Roadbed and Pavement 1 Load Capacity(Deflection test) 1001 Field Test Methods ofSubgrade and Pavement for Highway EngineeringJTG E60-2008 Accredited only for:Beckman beam method 2 Slip resistanceof pavement Accredited only for:pendulum meter test、the method of handmade spreading 3 Thickness Accredited only for:digging and core-drilling method 4 Conpactness ⅩⅣ Glass 1 Sealed insulating glass unit 1 Dew point 0310.01 Sealed insulating glass unit GB/T 11944-2012 ⅩⅤ Electric material 1 Electric wire and cable 1 D.C. resistanceof conductor 0424 Test methods for electrical properties of electric cables and wires - Part 4: Test of DC resistance of conductors GB/T 3048.4-2007 2 Determining insulation resistance Test methods for electrical properties of electric cables and wires - Part 5:Test of insulation resistance GB/T 3048.5-2007 3 A.C. voltage tests Test methods for electrical properties of electric cables and wires - Part 8:AC Voltage test GB/T 3048.8-2007 accredited only for :≤15kV 1 Electric wire and cable 4 Insulation thickness 0424 Common test methods for insulating and sheathing materials of electric and optical cables - Part 11:Methods for general application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties GB/T 2951.11-2008 5 Dimension 6 Mechnical properties 7 Heat aging Common test methods for insulating and sheathing materials of electric and optical cables - Part 12:Methods for general application-Thermal ageing methods GB/T 2951.12-2008 1 Electric wire and cable 8 Density 0424 Common test methods for insulating and sheathing materials of electric and optical cables - Part 13:Methods for general application-Measurement for determining the density - Water absorption tests - Shrinkage test GB/T 2951.13-2008 9 Shrinkage test 10 Test at low temperature Common test methods for insulating and sheathing materials of electric and optical cables - Part 14:Methods for general application - Test at low temperature GB/T 2951.14-2008 1 Electric wire and cable 11 Pressure test at high temperature 0424 Common test methods for insulating and sheathing materials of electric and optical cables - Part 31:Methods specific to PVC compounds - Pressure test at high temperature - Test for resistance to cracking GB/T 2951.31-2008 1 Electric wire and cable 12 Combustion of single insulated wire or cables 0424 Tests on electric and optical fibre cables under fire conditions - Part 11:Test for vertical flame propagation for a single insulated wire or cable – Apparatus GB/T 18380.11-2008 Test on electric and optical fibre cables under fire conditions - Part 12:Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1kW pre-mixed flame GB/T18380.12-2008 Tests on electric and optical fibre cables under fire conditions - Part 21:Test for vertical flame propagation for a single small insulated wire or cable–Apparatus GB/T 18380.21-2008 Tests on electric and optical fibre cables under fire conditions - Part 22:Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame GB/T 18380.22-2008 ⅩⅥ Electrical Engineer-ing 1 Power Quality 1 Admissible deviation of supply voltage 0425 Quality-Deviation of supply voltage GB/T12325-2008 Code for acceptance of energy efficient building construction GB 50411-2007 Code for acceptance of energy efficient building construction SZJG 31-2010 Accredietd only for:Voltage below 600V and currert below 1000A 1 Power Quality 2 Public network harmonicvoltage 0425 Power quality - Voltage fluctuation and flicker GB12326-2008 Code for acceptance of energy efficient building construction GB 50411-2007 Code for acceptance of energy efficient building construction SZJG 31-2010 1 Power Quality 3 Public network harmoniccurrent 0425 Quality of electric energy supply--Harmonics in public supply network GB/T14549-1993 Code for acceptance of energy efficient building construction GB 50411-2007 Code for acceptance of energy efficient building construction SZJG 31-2010 4 Three-pHase voltage unbalance factor Power quality - Three-pHase voltage unbalance GB/T 15543-2008 Code for acceptance of energy efficient building construction GB 50411-2007 Code for acceptance of energy efficient building construction SZJG 31-2010 1 Power Quality 5 Three-pHase light distribution main line pHase load balance factor 0425 Code for acceptance of energy efficient building construction GB 50411-2007 Code for acceptance of energy efficient building construction SZJG 31-2010 2 Monitoring and testing for energy saving of power supply distribution system of industrial enterprise 1 Deviation of supply voltage 0425 Technical guides for evaluating the rationality of electricity usage in industrial enterprise GB/T3485-1998 Monitoring and testing method for energy saving of power supply distribution system of industrial enterprise GB/T16664-1996 2 Daily load ratio 3 Power factor 4 Harmonic 5 Power factor 3 Three-pHase induction motor energy-saving operation 1 Input active power 0425 Three-pHase induction motor energy-saving operation GB/T12497-2006 2 Input reactive power 3 Power factor 4 Input voltage 5 Input current 4 Generic cabling system for building and campus 1 Reflection test on fiber link 0419 Code for engineering acceptance of genericcabling system GB/T50312-2007 2 Wire map 3 Attenuation 4 Near end cross talk ⅩⅦ Base and Foundation engineering 1 Foundation Pile 1 Static loading test for bearing capacity of foundation pile 1017 building foundation piles JGJ 106-2003 Code for design of building foundation GB 50007-2011 Code for testing of building foundation DBJ15-60-2008 Testing specification of building foundation piles SJG 09-2007 Technical code for building pile foundations JGJ 94-2008 1 Foundation Pile 2 Pile integrity(ultrasonic testing) 1017 building foundation piles JGJ 106-2003 Code for design of building foundation GB 50007-2011 Code for testing of building foundation DBJ15-60-2008 Testing specification of building foundation piles SJG 09-2007 Technical code for building pile foundations JGJ 94-2008 Technical code for testing ofTechnical specification for inspection of concrete defects by ultrasonic method CECS 21:2000 1 Foundation Pile 3 Pile integrity(low strain integrity testing) 1017 building foundation piles JGJ 106-2003 Code for design of building foundation GB 50007-2011 Technical code for building pile foundations JGJ 94-2008 Testing specification of building foundation piles SJG 09-2007 Code for testing of building foundation DBJ15-60-2008 4 Pile integrity(high strain dynamic testing) 5 High strain dynamic testing for pile integrity 6 Drill core testing 1 Foundation Pile 7 pile internal force testing Code for design of building foundation GB 50007-2011 Technical specification for retaining and protection of building foundation excavations JGJ 120-2012 Technical code for monitoring of building excavation engineering GB50497-2009 Technical code for retaining and protection of excavations in Shenzhen city SJG 05-2011 Code for investigation and design of foundation SJG 01-2010 2 Foundation 1 Static loading test for bearing capacity of nature foundation 1017 Code for design of building foundation GB 50007-2011 Code for testing of building foundation DBJ15-60-2008 Code for investigation of geotechnical engineering GB 50021-2001(2009) Code for investigation and design of foundation SJG 01-2010 2 Foundation 2 Static loading test for bearing capacity of composite foundation 1017 Technical code for ground treatment of buildings JGJ 79-2012 Code for design of building foundation GB 50007-2011 Code for testing of building foundation DBJ15-60-2008 Technical code for ground treatment in Shenzhen area SJG 04-1996 Code for investigation of geotechnical engineering GB 50021-2001(2009) Code for investigation and design of foundation SJG 01-2010 2 Foundation 3 Bearing capacity of foundation soil(standard penetration test) 1017 Code for investigation of geotechnical engineering GB 50021-2001(2009) Code for testing of building foundation DBJ 15-60-2008 Code for investigation and design of foundation SJG 01-2010 4 Bearing capacity of rock foundation(rock foundation load test) Code for design of building foundation GB 50007-2011 2 Foundation 5 Bearing capacity of rock foundation(dynamic penetration test) 1017 Code for investigation of geotechnical engineering GB 50021-2001(2009) Code for testing of building foundation DBJ 15-60-2008 Code for investigation and design of foundation SJG 01-2010 dynamic penetration test YS 5219-2000| 2 Foundation 6 Anti-pull force for anchor and soil nail 1017 Technical specification for retaining and protection of building foundation excavations JGJ 120-2012 Technical code for retaining and protection of excavations in Shenzhen city SJG 05-2011 Technical code for building slope engineering GB50330-2002 Specification for bolt-shotcrete Support GB 50086-2001 Code for design of building foundation GB 50007-2011 Code for investigation and design of foundation SJG 01-2010 3 Building slope 1 Plane displacement 1017 Technical code for building slope engineering GB50330-2002 Code for engineering testing GB 50026-2007 Code for investigation and design of foundation SJG 01-2010 2 Plumb displacement 3 Crack of surface ground 4 Shotcrete weight 4 Building Foundation Excavations 1 plane displacement 1017 Code for design of building foundation GB 50007-2011 Technical code for monitoring of building excavation engineering GB50497-2009 Technical Specification for Retaining and Protection of Building Foundation Excavations JGJ 120-2012 Technical code for retaining and protection of excavations in Shenzhen city SJG 05-2011 Code for engineering testing GB 50026-2007 Code for investigation and design of foundation SJG 01-2010 2 Plane displacement 4 Building Foundation Excavations 3 Groundwater level 1017 Code for design of building foundation GB 50007-2011 Technical code for monitoring of building excavation engineering GB 50497-2009 Technical Specification for Retaining and Protection of Building Foundation Excavations JGJ 120-2012 Technical code for retaining and protection of excavations in Shenzhen city SJG 05-2011 Code for engineering testing GB 50026-2007 Code for investigation and design of foundation SJG 01-2010 4 Building Foundation Excavations 4 Heaving of the bottom 1017 Code for design of building foundation GB 50007-2011 Technical Specification for Retaining and Protection of Building Foundation Excavations JGJ 120-2012 Technical code for monitoring of building excavation engineering GB 50497-2009 Technical code for retaining and protection of excavations in Shenzhen city SJG 05-2011 Code for engineering testing GB 50026-2007 Code for investigation and design of foundation SJG 01-2010 4 Building Foundation Excavations 5 soil Pore water pressure 1017 Code for design of building foundation GB 50007-2011 Technical code for monitoring of building excavation engineering GB 50497-2009 Technical Specification for Retaining and Protection of Building Foundation Excavations JGJ 120-2012 Technical code for retaining and protection of excavations in Shenzhen city SJG 05-2011 Code for investigation and design of foundation SJG 01-2010 6 filling delaminationVertical displacement 7 shoring structure inner force 4 Building Foundation Excavations 8 monitoring of soil pressure 1017 Code for design of building foundation GB 50007-2011 Technical code for monitoring of building excavation engineering GB 50497-2009 Technical Specification for Retaining and Protection of Building Foundation Excavations JGJ 120-2012 Technical code for retaining and protection of excavations in Shenzhen city SJG 05-2011 Code for investigation and design of foundation SJG 01-2010 4 Building Foundation Excavations 9 surface crack 1017 Technical code for monitoring of building excavation engineering GB 50497-2009 Code for investigation and design of foundation SJG 01-2010 Code for engineering testing GB 50026-2007 10 crack in Surrounding Building 4 Building Foundation Excavations 11 Shotcrete strength Technical Specification for Retaining and Protection of Building Foundation Excavations JGJ 120-2012 Technical code for retaining and protection of excavations in Shenzhen city SJG 05-2011 Specification for bolt-shotcrete Support GB50086-2001 Code for investigation and design of foundation SJG 01-2010 12 Horizontal displacement in deep soil Code for design of building foundation GB 50007-2011 Technical code for monitoring of building excavation engineering GB 50497-2009 Technical code for retaining and protection of excavations in Shenzhen city SJG 05-2011 5 Anchor 1 Anchor rodpulling force 1017 echnical code for retaining and protection of excavations in Shenzhen city SJG 05-2011 Specification for bolt-shotcrete SupportGB50086-2001Technical specification for ground anchors CECS 22:2005Technical code for building slope engineering GB 50330-2002 Technical Specification for Retaining and Protectionof Building Foundation Excavations JGJ 120-2012 Code for design of building foundation GB 50007-2011 Code for investigation and design of foundation SJG 01-2010 5 Anchor 2 Anchor internalforce monitoring 1017 echnical code for retaining and protection of excavations in Shenzhen city SJG 05-2011 Specification for bolt-shotcrete SupportGB50086-2001Technical specification for ground anchors CECS 22:2005Technical code for building slope engineering GB 50330-2002 Technical Specification for Retaining and Protectionof Building Foundation Excavations JGJ 120-2012 Code for design of building foundation GB 50007-2011 Code for investigation and design of foundation SJG 01-2010 6 Soil 1 Water content 1008.07 Standard for soil test method GB/T 50123-1999 Test Methods of Soils for Highway Engineering JTG E40-2007 Accredited only for:oven drying method、alcohol combustion method 2 Density Accredited only for:core cutter method 3 Compaction test ⅩⅧ Main body Structure engineer-ing 1 Concrete Structure 1 Concrete strength 1017 Technical specification for detecting strength of concrete by ultrasonic-rebound combined method CECS 02-2005 Technical Specification for Inspection of Concrete Compressive Strength by Rebound Method JGJ/T23-2011 Technical specification for testing concrete strength with drilled core CECS 03-2007 Technical standard for inspection of building structure GB/T 50344-2004 Accredited only for:rebound method, ultrasonic-rebound combined method, drilled core method 1 Concrete Structure 2 Thickness of concrete cover 1017 Technical specification for test of reinforcing steel bar in concrete JGJ/T 152-2008 Code for acceptance of constructional quality of concrete structures GB50204-2002(2011) 1 Concrete Structure 3 Concrete defects 1017 Technical specification for Inspection of concrete defects by ultrasonic method CECS 21-2000 Accredited only for: Depth of crack, Loose region and Cave, Quality of the concrete Joint Surfaces, Surface Damaged Layers. 4 Number, Diameters and Spacing of reinforcing steel bar Technical specification for test of reinforcing steel bar in concrete JGJ/T 152-2008 5 Bearing capacity of structure Testing methods of concrete structure GB/T 50152-2012 1 Concrete Structure 6 Dimension and deviation 1017 Technical standard for inspection of building structure GB/T 50344-2004 Code for acceptance of constructional quality of concrete structures GB 50204-2002(2011) 2 MasonryStructure 1 Compressive strength of brick 1017 The method of evaluating the fired common brick strength grading by rebound hammer JC/T 796-1999 Technical standard for site testing of engineering GB/T 50315-2011 Accredited only for:rebounelmethod 2 Compressive strength of mortar Technical specification for testing compressive strength of masonry mortar by penetration resistance methodJ GJ/T136-2001 Technical standard for site testing of engineering GB/T 50315-2011 Accredited only for:rebound method, 2 MasonryStructure 3 Compressive strength of masonry Technical standard for site testing of engineering GB/T 50315-2011 Accredited only for:axial compression method 4 Dimension and deviation Technical standard for inspection of building GB/T 50344-2004 Code for acceptance of constructional quality of masonry structures GB/T 50203-2011 3 built-in fitting 1 Bearing capacity of anchor 1017 Tension and shear test methods for building anchors DG/TJ08-003-2000 Technical Specification for Testing of Tension and Shear Behavior of Post-installed Fastenings Used in Concrete DBJ/T 15-35-2004 Technical specification for post-installed fastenings in concrete structures JGJ145-2004 Design code for strengthening concrete structure GB50367-2006 4 Tapestry Brick 1 Adhesivestrength 1017 Testing standard of adhesive strength of tapestrybrick for construction engineering JGJ 110-2008 5 Carbon fiber sheet 1 Adhesivestrength 1017 Technical specification for strengthening concrete structures with carbon fiber reinforced polymer laminate CECS 146-2003(2007) 6 Plastering mortar 1 Tensile bond strength at 14days 1017 Technical specification for plasting mortar(AppendixA) JGJ/T 220-2010 7 Steel plate binding 1 Pull-out test 1017 Design code for strengthening concrete structure(AppendixE) GB 50367-2006 ⅩⅨ Steel structure 1 steel structure 1 RadiograpHic testing 1101 RadiograpHic examination of fusion welded joints in metallic materials GB/T 3323-2005 Code for acceptance of construction quality of steel structures GB 50205-2001 2 Ultrasonic testing Method for manual ultrasonic testing and classification of testing results for ferritic steel welds GB/T 11345-1989 Method for ultrasonic testing and classification for steel structures JG/T203-2007 Technical standard for in-site testing of steel structure GB/T 50621-2010 1 steel structure 3 Magnetic particle testing 1101 Non-destructive testing-Magnetic particle testing of welds JB/T 6061-2007 Magnetic particle testingfor steel castings GB/T 9444-2007 Technical standard for in-site testing of steel structure GB/T 50621-2010 4 Penetrantion testing Liquid Penetrant Inspection Method for Steel Forgings JB/T8466-1996 Penetrant testing for steel castings GB/T 9443-2007 Non-destructive testing-Penetrant testing of welds JB/T 6062-2007 Technical standard for in-site testing of steel structure GB/T 50621-2010 1 steel structure 5 structural member thickness 1101 Non-destructive testing - Practice for measuring thickness by ultrasonic pulse-echo contact method GB/T 11344-2008 Technical standard for in-site testing of steel structure GB/T 50621-2010 6 Thickness of anticorrosion coating of steel structure Non-magnetic coatings on magnetic substrates-Measurement of coating thickness-Magnetic method GB/T 4956-2003 7 Thickness of fire protection coating of steel structure Non-magnetic coatings on magnetic substrates-Measurement of coating thickness-Magnetic method GB/T 4956-2003 Code for acceptance of construction quality of steel structures GB50205-2001 1 steel structure 8 Quality of welding connection appearance 1101 Code for acceptance of construction quality of steel structures GB 50205-2001 Technical standard for in-site testing of steel structure GB/T 50621-2010 9 appearance Technical standard for in-site testing of steel structure GB/T 50621-2010 10 Dimension and deviation 11 Damage Technical standard for inspection of building structure GB/T 50344-2004 Technical standard for in-site testing of steel structure GB/T 50621-2010 12 Partial distortion Technical standard for in-site testing of steel structure GB/T 50621-2010 1 steel structure 13 Load-carrying capacity Technical standard for inspection of building structure GB/T 50344-2004 Technical specification for inspection,Assessment and Strengthening of Steel Structures YB 9257-1996Code for acceptance of construction quality of steel structuresGB 50205-2001 14 Deformation inspection Code for deformation measurement of building and structure JGJ 8-2007 Technical standard for in-site testing of steel structure GB/T 50621-2010 Code for acceptance of construction quality of steel structures GB 50205-2001 2 Connect nodes of steel structure 1 Tensile strength 0301.01 Bolted joints of space grid structures JG 10-2009 Welded hollow spHerical node of space grid structures JG 11-2009 3 Fastenersand high-strength bolting 1 Tensile strength 0301.01 Metallic materials - Tensile testing - Part 1 : Method of test at room temperature GB/T228.1-2010 2 Shearing strength Pins and grooved pins-Shear test GB/T13683-1992 3 Wedge tensile strength?of actual material Mechanical properties of fasteners - Bolts,screws and studs GB/T 3098.1-2010 4 Connections with fastening axis force Sets of torshear type high strength bolt hexagon nut and plain washer for steel structures GB/T 3632-2008 exept for M27 and M30 bolt 3 Fastenersand high-strength bolting 5 Torque coefficient of connection Specifications of high strength bolts with large hexagon head ,large hexagon nuts,plain washers for steel structures GB/T 1231-2006 Code for acceptance of construction quality of steel structures GB 50205-2001 6 Anti-slide Coefficient Code for acceptance of construction quality of steel structures GB 50205-2001 ⅩⅩ Intelligent building engineering 1 Deformation measurement of building and structure 1 Sedimentation 1017 Code for deformation measurement of building and structure JGJ 8-2007 Code for engineering testing GB 50026-2007 Accredited only for: level two, level three 2 inclination observation 1 Deformation measurement of building and structure 3 Crack 1017 Code for deformation measurement of building and structure JGJ 8-2007 Technical standard for inspection of building structure GB/T 50344-2004 Testing methods of concrete structure GB/T 50152-2012 4 Bending deflection Code for deformation measurement of building and structure JGJ 8-2007 2 Structure 1 Displacement 1017 Testing methods of concrete structure GB/T 50152-2012 2 Velocity Safety regulations for blasting GB 6722-2003 3 Acceleration Standard of limit and measurement method of vibration in the room of residential buildings GB/T50355-2005 2 Structure 4 Frequecy Standard of limit and measurement method of vibration in the room of residential buildings GB/T50355-2005 Safety regulations for blasting GB 6722-2003 5 Strain Testing methods of concrete structure GB/T 50152-2012 ⅩⅩⅠ Air quality 1 Indoor environmrntalpollutants 1 Radon 0238 Standard methods for radon measurement in environmental air GB/T14582-1993 2 Formaldehyde Methods for determination of formaldehyde in air of public places GB/T18204.26-2000 3 Benzene Code for indoor environmental pollution control of civil building engineering GB50325-2010 1 Indoor environmrntalpollutants 4 Ammonia 0238 Method for determination of ammonia in air of public places GB/T18204.25-2000 5 TVOC Code for indoor environmental pollution control of civil building engineering GB50325-2010 2 Air quality 1 Temperature 0238 Methods for determination of air temperature in public places GB/T18204.13-2000 2 Relative Humidity Methods for determination of air humidity in public places GB/T18204.14-2000 3 Air velocity Methods for determination of wind speed in public places GB/T18204.15-2000 4 Air change flow Method for determination of air change flow of indoor air in public places GB/T18204.18-2000 2 Air quality 5 SO2 0238 Ambient air--Determination of sulfur dioxide--Formaldehyde absorbing-pararosaniline spectropHotometry HJ 482-2009 6 NO2 Ambient air--Determination of nitrogen dioxide--Saltzman method GB/T15435-1995 7 CO Methods for determination of carbon monoxide in air of public places GB/T18204.23-2000 8 CO2 Methods for determination of carbon dioxide in air of public places GB/T18204.24-2000 9 Ammonia Method for determination of ammonia in air of public places GB/T18204.25-2000 10 Formaldehyde Methods for determination of formaldehyde in air of public places GB/T18204.26-2000 2 Air quality 11 Ozone 0238 Method of examination of ozone in air of public places GB/T18204.27-2000 12 Benzene Standard method for hygienic examination of benzene,toluene and xylene in air of residential areas--Gas chromatograpHy GB/T11737-1989 13 Toluene Ambient air-Determination of benzene and its analogies using sorbent adsorption thermal desorption and Gas Chromatograp HyHJ 583-2010 14 xylene 15 Inhalable particulate matter Hygienic standard for inhalable particulate matter in indoor air GB/T17095-1997 16 TVOC Code for indoor environmental pollution control of civil building engineering GB50325-2010 2 Air quality 17 Radon Standard methods for radon measurement in environmental air GB/T14582-1993 18 Total suspended particulates Ambient air--Determination of total suspended particulates--Gravimetric method GB/T15432-1995 19 Gamma-radiation dose rate Norm for the measurement of environmental terrestrial gamma-radiation dose rate GB/T14583-1993 ⅩⅩⅡ Water quality 1 Water 1 pH value 0233 Water quality--Determination of pH value--Glass electrode method GB6920-1986 2 Dissolved oxygen Water quality--Determination of dissolved oxygen--Electrochemical probe method HJ 506-2009 1 Water 3 Suspended matter 0233 Water quality--Determination of suspended substance--Gravimetric method GB11901-1989 4 Biochemical oxygen demand after 5 days(BOD5) Water quality--Determination of biochemical oxygen demand after 5 days(BOD5)--Dilution and seeding method HJ 505-2009 5 Chemical oxygen demand(COD) Water quality--Determination of the chemical oxygen demand--Dichromate methodGB11914-1989 6 Copper Technical Specifications Requirements for Monitoring of Surface Water and Waste Water HJ/T 91-2002 7 zinc 8 lead 9 Cadmium 1 Water 10 Nickel 0233 Water quality--Determination of nickel--Flame atomic absorption spectrometric method GB/T 11912-1989 Technical Specifications Requirements for Monitoring of Surface Water and Waste Water HJ/T 91-2002 1 Water 11 hexavalent chromium 0233 Water quality--Determination of chromium(6)--1.5 Diphenylcarbahydrazide spectrophotometric method GB/T 7467-1987 Technical Specifications Requirements for Monitoring of Surface Water and Waste Water HJ/T 91-2002 1 Water 12 total nitrogen 0233 Water quality-Determination of total nitrogen-Alkaline potassium persulfate digestion UV spectrophotometric method HJ 636—2012 13 total phosphorus Water quality--Determination of total phosphorus--Ammonium molybdate spectrophotometric method GB 11893-1989 14 ammonia nitrogen Water quality-Determination of ammonia nitrogen-Nessler's reagent spectrophotometry HJ 535-2009 ⅩⅩⅢ The solar utility system 1 Independent pHotovoltaic system 1 Output currentand voltage of pHotovoltaic array 1515 Independent pHotovoltaic system- design verification IEC 62124:2004 Accredited only for:current, voltage, temperature, irradiance 1 Independent pHotovoltaic system 2 Numerical value of load current and voltage 1515 Independent pHotovoltaic system- design verification IEC 62124:2004 Accredited only for:current, voltage, temperature, irradiance 3 Environmental temperature 4 Temperature of pHotovoltaic modules 5 Temperature of storage battery 6 Solar irradiance 2 Grid-connected PV system(The electric power quality of pHotovoltaic system) 1 harmonic and Waveform distortion 1515 Technical requirements for grid connection of PV system GB/T19939-2005 Accredited only for:product which pass the safety and protection test in this standard 2 frequency 3 voltage deviation 4 Three-pHase voltage unbalance 3 Grid-connected PV system(The electrical performance of ?pHotovoltaic system) 1 Current 1515 PHotovoltaic system performance monitoring Guidelines for measurement, data exchange and analysis GB/T20513-2006 Accredited only for:test,not analysis 2 Voltage 3 Active power 4 Reactive power 5 Power factor 4 Grid-connected PV system(environ-mental parameter of pHotovolt-aic system) 1 Eenvironmental temperature 1515 PHotovoltaic system performance monitoring Guidelines for measurement, data exchange and analysis GB/T20513-2006 Accredited only for:test,not analysis. 2 Component temperature 3 Solar irradiance ⅩⅩⅣ Thermal infrared imaging 1 Building exterior wall facing 1 Plaster defect 1207 Technical specification for inspecting the defects of exterior walls cementing coats of building using infrared thermograpH method CECS204:2006 2 Electriferous equipment 1 Temperature difference 1207 Technical guide for infrared diagnosis of alive equipment DL/T664-2008 ⅩⅩⅤ Energy Efficiency Test 1 Thermal comfort level 1 Air temperature 1519 Moderate thermal environments--Determination of the PMV and PPD indices and specification of the conditions for thermal comfort GB/T 18049-2000 2 Humidity 1 Thermal comfort level 3 Black-bulb temperature 1519 Hot environments--Estimation of the heat stress on working man based on the WBGT-index (wet bulb globe temperature) GB/T17244-1998 4 Relative air velocity Moderate thermal environments--Determination of the PMV and PPD indices and specification of the conditions for thermal comfort GB/T 18049-2000 2 Outdoor solar radiation 1 Solar total radiation 1519 Specifications for surface meteorological observation Part 11: Measurement of radiation QX/T55-2007 2 Solar scattered radiation 3 Exterior wall energy efficient structure 1 Drill core check of exterior wall energy efficient structure 1017 Code for acceptance of energy efficient building construction GB50411-2007 Appendix CCode for acceptance of energy efficient building construction SZJG 31-2010 4 Industrial boiler 1 Exhaust gas temperature 1102 Monitoring and testing for energy saving of coal fired industrial boilers GB/T15317-2009 2 Air coefficient 3 Outward surface temperature of furnace body 5 Industrial boiler thermal properties 1 Thermal effiency 1102 Thermal performance test code for industrial boilers GB/T10180-2003 exept for: Fuels and combustion analysis 6 Air pollutants emission from boiler 1 Concentrationof SO2 1102 Emission standard of air pollutants for coal-burning of oil-burning gas-fired boiler GB 13271-2001 6 Air pollutants emission from boiler 2 Concentrationof Nox 1102 Emission standard of air pollutants for coal-burning of oil-burning gas-fired boiler GB 13271-2001 7 Monitoring and testing for energy saving of thermodyna-mic system 1 Outward surface temperature 1102 Monitoring and testing method for energy saving of heat transmission and distribution system GB/T15910-2009 2 Environmental temperature 3 Environmental wind velocity ⅩⅩⅥ Acoustic environmental quality 1 Sound insulation in buildings 1 Field measurements of airborne sound insulation 1404.06 Acoustics—Measurements of sound insulation in buildings and of building elements—Part 4:Field measurements of airborne sound insulation between rooms GB/T 19889.4-2005 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 5:Field measurements of airborne sound insulation of facade elements and facades GB/T 19889.5-2006 1 Sound insulation in buildings 2 Field measurements of impact sound insulation 1404.06 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 7:Field measurements of impact sound insulation of floors GB/T 19889.7-2005 2 Acoustical of gymnasium 1 Reverberation time 1404.06 Code for acoustical design and measurement of gymnasium JGJ/T 131-2012 2 Background noise 3 Most sound press level 4 Transmission frequency character 5 Transmission plus 6 Uniformity of soundfield 3 Hall 1 Reverberation time 1404.07 Acoustics-measurement of sound reverberation time in halls-specifications GBJ 76-1984 4 Environmental noise 1 Noise 1404.021404.06 Standard of noise at boundary of industrial enterprises GB 12348-2008 Environmental quality standard for noise GB 3096-2008 Acoustics—Description,measurement and assessment of environmental noise—Part1:Basic quantities and assessment procedures GB/T3222.1-2006 Acoustics - Description, measurement and assessment of environmental noise - Part 2: Determination of environmental noise levels GB/T3222.2-2009 Emisson standard of environment noise for boundary of construction site GB 12523-2011 Emission standard for community noise GB22337-2008 ⅩⅩⅦ Profiles and sealants 1 Profiles(doors, windows and their materials of buildings) 1 Dimension 0315 Wrought aluminium alloy extruded profiles for architecture - Part 1: Mill finish profiles GB 5237.1-2008 Wrought aluminium alloy extruded profiles for architecture - Part 2: Anodized profiles GB 5237.2-2008 Wrought aluminium alloy extruded profiles for architecture—Part 3: ElectropHoretic coating profiles GB 5237.3-2008 Wrought aluminium alloy extruded profiles for architecture—Part 4:Powder coating profiles GB 5237.4-2008 Wrought aluminium alloy extruded profiles for architecture—Part 5:PVDF coating profiles GB 5237.5-2008 Unplasticized polyvinyl chloride (PVC-U) profiles for the doors and windors GB/T8814-2004 Aluminium alloy plate for curtain wall - untreated plate YS/T429.1-2000 Aluminium alloy plate for curtain wall part 2: Organic polymer coating Aluminium panels YS/T 429.2-2012 1 Profiles(doors, windows and their materials of buildings) 2 Appearance 0315 Wrought aluminium alloy extruded profiles for architecture - Part 1: Mill finish profiles GB 5237.1-2008 Wrought aluminium alloy extruded profiles for architecture - Part 2: Anodized profiles GB 5237.2-2008 Wrought aluminium alloy extruded profiles for architecture—Part 3: ElectropHoretic coating profiles GB 5237.3-2008 Wrought aluminium alloy extruded profiles for architecture—Part 4:Powder coating profiles GB 5237.4-2008 Wrought aluminium alloy extruded profiles for architecture—Part 5:PVDF coating profiles GB 5237.5-2008 Unplasticized polyvinyl chloride (PVC-U) profiles for the doors and windors GB/T8814-2004 Aluminium alloy plate for curtain wall - untreated plate YS/T429.1-2000 Aluminium alloy plate for curtain wall part 2: Organic polymer coating Aluminium panels YS/T 429.2-2012 1 Profiles(doors, windows and their materials of buildings) 3 Tensile strength 0315 Metallic materials - Tensile testing - Part 1 : Method of test at room temperature GB/T228.1-2010 4 Percentage extension 5 Coating thickness/ Thickness of coating Non-conductive coatings on non-magnetic basis metals—Measurement of coating thickness—Eddy current GB/T4957-2003 1 Profiles(doors, windows and their materials of buildings) 6 Quality of sealed anodic oxide coating 0315 Anodizing of aluminium and aluminium alloys—Assessment of quality of sealed anodic oxide coatings—Part 2:PHospHoric acid/chromic acid test with nitric acid predip GB/T 8753.2-2005 7 Adhesion ofpaint films Method of test for adhesion of paint films GB1720-1979Paints and varnishes-Cross cut test for films GB/T9286-1998 1 Profiles(doors, windows and their materials of buildings) 8 Boiling water resistance 0315 Wrought aluminium alloy extruded profiles for architecture—Part 3: ElectropHoretic coating profiles GB 5237.3-2008 Wrought aluminium alloy extruded profiles for architecture—Part 4:Powder coating profiles GB 5237.4-2008 9 Acid resistance Wrought aluminium alloy extruded profiles for architecture—Part 3:ElectropHoretic coating profiles GB 5237.3-2008 Wrought aluminium alloy extruded profiles for architecture—Part 4:Powder coating profiles GB 5237.4-2008 Wrought aluminium alloy extruded profiles for architecture—Part 5:PVDF coating profiles GB 5237.5-2008 1 Profiles(doors, windows and their materials of buildings) 10 Solvent resistance 0315 Wrought aluminium alloy extruded profiles for architecture—Part 3:ElectropHoretic coating profiles GB 5237.3-2008 Wrought aluminium alloy extruded profiles for architecture—Part 4:Powder coating profiles GB 5237.4-2008 Wrought aluminium alloy extruded profiles for architecture—Part 5:PVDF coating profiles GB 5237.5-2008 11 Impact resistance Wrought aluminium alloy extruded profiles for architecture—Part 4:Powder coating profiles GB 5237.4-2008 Wrought aluminium alloy extruded profiles for architecture—Part 5:PVDF coating profiles GB 5237.5-2008 1 Profiles(doors, windows and their materials of buildings 12 Film hardness 0315 Paints and varnishes—Determination of film hardness by pencil test GB/T 6739-2006 13 Vicat softening temperature Plastics--Thermoplastic materials--Determination of vicat softening temperature(VST) GB/T1633-2000 14 Appearance after heating Unplasticized polyvinyl chloride (PVC-U) profiles for the doors and windors GB/T8814-2004 15 Changeing rate dimensions on heating 16 Machine Direction Tensile test Wrought aluminium alloy extruded profiles for architecture—Part 6:Thermal barrier profiles GB 5237.6-2012 17 Cross Direction Tensile test 1 Profiles(doors, windows and their materials of buildings 18 drop hammer blowing test 0315 Unplasticized polyvinyl chloride (PVC-U) profiles for the doors and windors GB/T8814-2004 19 Weldability 20 The quality of the main profile 2 Acrylate sealant for building 1 Shore hardness 0318 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1:Duromerer method (Shore hardness) GB/T531.1-2008 2 Tack-free time Test method for building sealants Part 5:Determination for tack-free time GB/T13477.5-2002 3 Flow Test method for building sealants Part 6:Determination of flow GB/T13477.6-2002 4 Tensile bondproperties Test method for building sealants Part 8:Determination of tensile properties GB/T13477.8-2002 5 Tensile bond strength after soaking Test method for building sealants Part 9:Determination of adhesion/cohesion properties after immersion in water GB/T13477.9-2002 6 Thermal aging Structural silicon sealants for building GB16776-2005 7 Compatibility with attachments 8 Compatibility with the base materials ⅩⅩⅧ Ventilat-ing and air-condit-ionengineer-ing 1 Ventilating and air-condition 1 Wind speed and blast volume 0343.04 Code of acceptance for construction quality of ventilation and air conditioning works GB50243-2002 Central-station air handling units GB/T14294-2008 2 Wind pressure 1 Ventilating and air-condition 3 Light leakage 0343.04 Code of acceptance for construction quality of ventilation and air conditioning works GB50243-2002 Technical specification of air duct JGJ141-2004 4 Leakage blast volume 5 Compression strength Technical specification of air duct JGJ141-2004 6 Water presure Code of acceptance for construction quality of ventilation and air conditioning works GB50243-2002 7 Ratational speed 8 Temperature Standard for energy efficiency test of public buildings JGJ/T 177-2009 1 Ventilating and air-condition 9 Water flow quantity 0343.04 Ultrasonic flowmeter for potable water and drain water (Transmission speed difference method) CJ/T 3063-1997 1 Ventilating and air-condition 10 Power 0343.04 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 3: Special requirements for wattmeters and varmeters GB/T 7676.3-1998 11 Coefficient of cost electricity transport power Design standard for energy efficiency of public buildings GB 50189-2005 12 Cost power of wind engine unit 13 Sound pressure level of noise Determination of sound power levels for noise emitted by heating ventilating and air conditioning equipment-Engineering method GB9068-1988 2 Glass fiber reinforced plastic cooling tower 1 Thermodynamic performance 0343.04 Glass fiber reinforced plastic cooling tower--Part 1: Middle and small glass fiber reinforced plastic cooling tower GB 7190.1-2008Standard Practice for Cooling Towers CECS 118-2000 2 Noise 3 Rate of power consumption 4 Cooling towerair volume 5 Rate of water drift 3 Integrated effect for operation and management of central air condition system 1 Indoor temperature 0343.04 Methods for determination of air temperature in public places GB/T18204.13-2000 2 Indoor relative humidity Methods for determination of air humidity in public places GB/T18204.14-2000 3 Integrated effect for operation and management of central air condition system 3 Indoor air flowspeed 0343.04 Methods for determination of wind speed in public places GB/T18204.15-2000 4 Fresh air volume Method for determination of air change flow of indoor air in public places GB/T18204.18-2000 5 Indoor noise Method for determination of noise in public places GB/T18204.22-2000 6 CO Methods for determinationof carbon monoxide in airof public places GB/T18204.23-2000 7 CO2 Methods for determinationof carbon dioxide in airof public places GB/T18204.24-2000 8 Equipment andpipe thermal insulation Method of measuring and evaluation thermal insulation effects for equipments and pipes GB/T 8174-2008 4 Economic operation of air condition 1 Air-conditioning energy consumption per unit area 0343.04 Economic operation of air conditioning systems GB/T17981-2007 2 Air-conditioning cold consumption per unit area 3 Energy efficiency ratio of air-conditioning system 4 Energy efficiency ratio of Refrigeration system 5 Chilled water transport factor 6 The energy efficiency ratio of air-conditioning terminal 7 The operating efficiency of water chiller 4 Economic operation of air condition 8 Cooling water transport factor 0343.04 Economic operation of air conditioning systems GB/T17981-2007 5 Monitoring and testing for energy saving of fan unit and distribution tubesystem 1 Fan all press 0343.04 Monitoring and testing for energy saving of fan's unit and distribution tube system GB/T15913-2009 2 Fan Flow 3 Electrical energy utilization rate of fan unit 4 Electromotor load rate 6 Monitoring and testing method for energy saving of air compressor unit and air distribute-ion system 1 Discharge temperature 0343.04 Monitoring and testing method for energy saving of air compressor unit and air distribution system GB/T16665-1996 2 Cold in-water temperature 3 Cold in-water and out-water temperature difference 6 Monitoring and testing method for energy saving of air compressor unit and air distribute-ion system 4 Electricity intensity of air compressor unit 0343.04 Monitoring and testing method for energy saving of air compressor unit and air distribution system GB/T16665-1996 7 Monitoring and Testing for Energy Saving of Motor-pump Liquid Transport System 1 Electromotor load rate 0343.04 Monitoring and testing for energy saving of motor-pump liquid transport system GB/T16666-2012 2 Category of pumps and their efficiencies 3 Category of pumps and liquid transportation systems and their efficiencies ⅩⅩⅨ Optical environ-ment of building 1 Daylighting 1 Daylighting coefficient 0328 Methods of daylighting measurements GB/T5699-2008 2 Reflectance coefficient 1 Daylighting 3 Luminous transmittance 0328 Methods of daylighting measurements GB/T5699-2008 2 Lighting system 1 Luminance 328 Measurement methods for lighting GB/T 5700-2008 Standard for lighting design and test of sports venues JGJ 153-2007 2 Capacity density of Lighting Measurement methods for lighting GB/T 5700-2008 3 Luminance 4 Color rendering index Measurement methods for lighting GB/T 5700-2008 Standard for lighting design and test of sports venues JGJ 153-2007 5 Color temperature 中国合格评定国家认可委员会 认可证书附件(注册号:CNAS L0931) 名称: 深圳市建筑科学研究院股份有限公司 地址:广东省东莞市松山湖工业东路8号 签发日期:2012年01月18日 有效期至:2015年01月17日 更新日期:2013年02月16日 附件1 认可的授权签字人及领域 序号 姓名授权签字领域 备注1叶青全部检测项目 2 王莹 建筑材料有害物质,室内环境污染物,空气净化器、室内空气净化功能涂覆材料检测项目. 3 郭志坚 建筑材料有害物质,室内环境污染物,空气净化器、室内空气净化功能涂覆材料检测项目. 4 任俊 全部检测项目 CHINA NATIONAL ACCREDITATION SERVICE FOR CONFORMITY ASSESSMENT APPENDIX OF ACCREDITATION CERTIFICATE (Registration No. CNAS L0931) NAME:Shenzhen Institute of Building Research Co., Ltd. ADDRESS:No.8, Industrial East Road, Songshan Lake, Dongguan, Guangdong, China Date of Issue:2012-01-18 Date of Expiry:2015-01-17 Date of Update:2013-02-16 APPENDIX 1 ACCREDITED SIGNATORIES AND SCOPE № Name Authorized Scope of Signature Note 1 Ye Qing Authorized all testing items. 2 Wang Ying Authorized testing items for Harmful substance,Indoor environmrnt alpollutants,Air cleaner and air-purification coating. 3 Guo Zhijian Authorized testing items for Harmful substance,Indoor environmrnt alpollutants,Air cleaner and air-purification coating. 4 Ren jun Authorized all testing items. 中国合格评定国家认可委员会 认可证书附件(注册号:CNAS L0931) 名称: 深圳市建筑科学研究院股份有限公司 地址:广东省东莞市松山湖工业东路8号 认可依据:ISO/IEC 17025:2005以及CNAS特定认可要求 签发日期:2012年01月18日 有效期至:2015年01月17日 更新日期:2013年02月16日 附件2 认可的检测能力范围 序号 检测 对象 项目/参数 领域 代码 检测标准(方法)名称及编号(含年号) 限制 范围 说明 序号 名称 1 建筑材料有害物质 1 甲醛 0215 人造板及饰面人造板理化性能试验方法 GB/T17657-1999 室内装饰装修材料人造板及其制品中甲醛释放限量 GB 18580-2001 室内装饰装修材料内墙涂料中有害物质限量 GB18582-2008 室内装饰装修材料 胶粘剂中有害物质限量GB18583-2008 室内装饰装修材料木家具中有害物质限量 GB18584-2001 室内装饰装修材料壁纸中有害物质限量 GB18585-2001 室内装饰装修材料地毯、地毯衬垫及地毯胶粘剂中有害物质释放限量 GB18587-2001 民用建筑工程室内环境污染控制规范 GB50325-2010 水性涂料中甲醛含量的测定 乙酰丙酮分光光度法 GB/T 23993-2009 室内装饰装修材料 建筑用外墙涂料中有害物质限量 GB 24408-2009 室内装饰装修材料 水性木器涂料中有害物质限量 GB 24410-2009 1 建筑材料有害物质 2 挥发性有机物 0215 室内装饰装修材料 溶剂型木器涂料中有害物质限量 GB18581-2009 室内装饰装修材料内墙涂料中有害物质限量 GB18582-2008 室内装饰装修材料聚氯乙烯卷材地板中有害物质限量 GB18586-2001 建筑用外墙涂料中有害物质限量GB 24408-2009 室内装饰装修材料 水性木器涂料中有害物质限量 GB 24410-2009民用建筑工程室内环境污染控制规范 GB 50325-2010 3 总挥发性有机化合物 室内装饰装修材料 胶粘剂中有害物质限量GB18583-2008 室内装饰装修材料地毯、地毯衬垫及地毯胶粘剂中有害物质释放限量 GB18587-2001 民用建筑工程室内环境污染控制规范 GB50325-2010 1 建筑材料有害物质 4 苯0215 室内装饰装修材料 溶剂型木器涂料中有害物质限量 GB18581-2009 室内装饰装修材料 胶粘剂中有害物质限量GB18583-2008 建筑用外墙涂料中有害物质限量 GB 24408-2009 民用建筑工程室内环境污染控制规范 GB 50325-2010 5 甲苯、乙苯和二甲苯总和 室内装饰装修材料 溶剂型木器涂料中有害物质限量 GB18581-2009 室内装饰装修材料 建筑用外墙涂料中有害物质限量 GB 24408-2009 民用建筑工程室内环境污染控制规范 GB 50325-2010 6 苯、甲苯、乙苯、二甲苯总和 室内装饰装修材料内墙涂料中有害物质限量 GB18582-2008 室内装饰装修材料 水性木器涂料中有害物质限量 GB 24410-2009 7 甲苯和二甲苯总和 室内装饰装修材料 胶粘剂中有害物质限量GB18583-2008 民用建筑工程室内环境污染控制规范 GB 50325-2010 1 建筑材料有害物质 8 游离甲苯二异氰酸酯 0215 色漆和清漆用漆基 异氰酸酯树脂中二异氰酸酯单体的测定GB18446-2009 室内装饰装修材料 胶粘剂中有害物质限量GB18583-2008 9 氯乙烯单体 室内装饰装修材料聚氯乙烯卷材地板中有害物质限量 GB18586-2001 10 苯乙烯 室内装饰装修材料地毯、地毯衬垫及地毯胶粘剂中有害物质释放限量 GB18587-2001 11 4-苯基环已烯 12 丁基羟基甲苯 13 2-乙基已醇 14 氨 混凝土外加剂中释放氨的限量GB18588-2001 2 室内环境污染物 1 游离甲醛 0238 公共场所空气中甲醛测定方法GB/T18204.26-2000 2 苯 民用建筑工程室内环境污染控制规范 GB 50325-2010 3 甲苯 环境空气 苯系物的测定 固体吸附热脱附-气相色谱法 HJ 583-2010 4 二甲苯 5 氨 公共场所空气中氨测定方法GB/T18204.25-2000 2 室内环境污染物 6 TVOC 0238 民用建筑工程室内环境污染控制规范 GB50325-2010 7 氡 环境空气中氡的标准测量方法GB/T14582-1993 3 空气净化器 1 气态污染物净化效能 0244.04 空气净化器GB/T 18801-2008 4 室内空气净化功能涂覆材料 1 净化效率 0244.04 室内空气净化功能涂覆材料净化性能JC/T 1074-2008 2 净化效果持久性 CHINA NATIONAL ACCREDITATION SERVICE FOR CONFORMITY ASSESSMENT APPENDIX OF ACCREDITATION CERTIFICATE (Registration No. CNAS L0931) NAME:Shenzhen Institute of Building Research Co., Ltd. ADDRESS:No.8, Industrial East Road, Songshan Lake, Dongguan, Guangdong, China Accreditation Criteria:ISO/IEC 17025:2005 and relevant requirements of CNAS Date of Issue:2012-01-18 Date of Expiry:2015-01-17 Date of Update:2013-02-16 APPENDIX 2 ACCREDITED TESTING № Test Object Item/Parameter Code of Field Title, Code of Standard or Method Limitation Note № Item/ Parameter 1 Harmful substance 1 Formaldehyde 0215 Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels GB/T17657-1999 Indoor decorating and refurbishing materials--Limit of formal dehyde emission of wood based panels and finishing products GB 18580-2001 Indoor decorating and refurbishing materials-Limit of harmful substances of interior architectural coatings GB18582-2008 Indoor decorating andrefurbishing materials-Limit of harmful substances of adhesives GB18583-2008 Indoor decorating and refurbishingmaterials--Limit of harmful substances of wood based furniture GB18584-2001 Indoor decorating and refurbishing materials--Limit of harmful substances of wallpapers GB18585-2001 1 Harmful substance 1 Formaldehyde 0215 Indoor decorating and refurbishing materials--Limitations of harmful substances emitted from carpets,carpet cushions and adhesives GB18587-2001 Code for indoor environmental pollution control of civil building engineering GB50325-2010 Determination of formaldehyde content of waterborne coatings - SpectropHtometric method with acetylacetone GB/T 23993-2009 Limit of harmful substances of exterior wall coatings GB 24408-2009 Indoor decorating and refurbishing materials - Limit of harmful substances of water based woodenware coatings GB 24410-2009 1 Harmful substance 2 Volatile organic compounds 0215 Indoor decorating and refurbishing materials--Limit of harmful substances of solvent coatings for woodenware GB18581-2009 Indoor decorating and refurbishing materials-Limit of harmful substances of interior architectural coatings GB18582-2008 Indoor decorating and refurbishing materials--Limit of harmful substances of polyvinyl chloride floor coverings GB18586-2001 Limit of harmful substances of exterior wall coatings GB 24408-2009 1 Harmful substance 2 Volatile organic compounds 0215 Indoor decorating and refurbishing materials - Limit of harmful substances of water based woodenware coatings GB 24410-2009 Code for indoor environmental pollution control of civil building engineering GB50325-2010 3 Total volatile organic compounds Indoor decorating and refurbishing materials-Limit of harmful substances of adhesives GB18583-2008 Indoor decorating and refurbishing materials--Limitations of harmful substances emitted from carpets,carpet cushions and adhesives GB18587-2001 Code for indoor environmental pollution control of civil building engineering GB50325-2010 1 Harmful substance 4 Benzene 0215 Indoor decorating and refurbishing materials--Limit of harmful substances of solvent coatings for woodenware GB18581-2009 Indoor decorating and refurbishing materials-Limit of harmful substances of adhesives GB18583-2008 Limit of harmful substances of exterior wall coatingsGB 24408-2009Code for indoor environmental pollution control of civil building engineering GB50325-2010 1 Harmful substance 5 Total of toluene and xylene 0215 Indoor decorating and refurbishing materials--Limit of harmful substances of solvent coatings for woodenware GB18581-2009 Limit of harmful substances of exterior wall coatings GB 24408-2009 Code for indoor environmental pollution control of civil building engineering GB50325-2010 6 Total amount of benzene, toluene, ethyl benzene, and xylene Indoor decorating and refurbishing materials-Limit of harmful substances of interior architectural coatings GB18582-2008 Indoor decorating and refurbishing materials - Limit of harmful substances of water based woodenware coatings GB 24410-2009 1 Harmful substance 7 Total of toluene and xylene 0215 Indoor decorating and refurbishing materials-Limit of harmful substances of adhesives GB18583-2008 Code for indoor environmental pollution control of civil building engineering GB50325-2010 8 TDI((tolylene diisocyanate) Binders for paints and varnishes - Determination of monomeric diisocyanates in isocyanate resins GB18446-2009 Indoor decorating and refurbishing materials-Limit of harmful substances of adhesives GB18583-2008 9 Chloroethylene Indoor decorating and refurbishing materials--Limit of harmful substances of polyvinyl chloride floor coverings GB18586-2001 1 Harmful substance 10 Styrene 0215 Indoor decorating and refurbishing materials—Limitations of harmful substances emitted from carpets,carpet cushions and adhesives GB18587-2001 11 4-PHenylcyclo- hexene 12 BHT-butylated hydroxytoluene 13 2-ethyl-1-hexanol 14 Ammonia Limit of ammonia emitted from the concrete admixtures GB18588-2001 2 Indoor environmrntalpollutants 1 Formaldehyde 0238 Methods for determination of formaldehyde in air of public places GB/T18204.26-2000 2 Benzene Code for indoor environmental pollution control of civil building engineering GB50325-2010 2 Indoor environmrntalpollutants 3 Toluene 0238 Ambient air-Determination of benzene and its analogies using sorbent adsorption thermal desorption and Gas Chromatograp HyHJ 583-2010 4 xylene 5 Ammonia Method for determination of ammonia in air of public placesGB/T18204.25-2000 6 TVOC Code for indoor environmental pollution control of civil building engineering GB50325-2010 7 Radon Standard methods for radon measurement in environmental air GB/T14582-1993 3 Air cleaner 1 The purification efficiency of gaseous pollutants 0244.04 Air cleaner GB/T 18801-2008 4 air-purification coating 1 efficiency of clean 0244.04 Purificatory performance of coating with air purification JC/T 1074-2008 2 the?lasting of the purifying effect